
EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

PCB of three phase inverter designed by Engr. Asif Ahmad
PCB Design Project is an open-source printed circuit board by asifahmad-namal2020, from the asifahmad-namal2020/PCB_Design_Project repository on GitHub. It is a 2-layer board with 107 parts on 62 nets, routed with 334 tracks and 0 vias.
It is built around the IR2110L4 and TLP250(F). Its parts include 10 capacitors, 9 ICs, 9 diodes, 6 resistors and 6 transistors.
PCB of three phase inverter designed by Engr. Asif Ahmad
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | DIODE | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 6 | IRF6641 | Package_TO_SOT_THT:TO-3PB-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 6 | TLP250 | Package_DIP:DIP-8_W7.62mm | U2, U3, U4, U5, U7, U8 |
| 5 | CP1 | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C1, C3, C5, C7, C9 |
| 5 | C_Small | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C2, C4, C6, C8, C10 |
| 3 | IR2110 | Display_7Segment:MAN73A | U1, U6, U9 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | Screw_Terminal_01x06 | Connector_TE-Connectivity:TE_826576-6_1x06_P3.96mm_Vertical | J1 |
The 42 most common of 107 parts.

Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

HNadeemTahir/AI_Inverter_Project
NgSpice Digital Twin of a complete off-grid solar power system: H-Bridge inverter (220V/50Hz, PI control, electro-thermal IGBT modeling) and 4kW MPPT boost converter (UC3843 analog control, KCL summing node, gate drive…


Abineshpk007/KICAD-boost-converter-gate-pulse-from-DSP-
This is my PCB, there are many outer like it but this is mine

Andy18650/GB2-2025-team4
GitHub repository for Cambridge University Engineering part IIA project GB2: Electrical Power, Team 4


Bojtronic/TFG
Trabajo final de graduación para el grado de licenciatura en ingeniería en computadores

feaksel/chb-inverter
5-Level Cascaded H-Bridge Inverter (ELE 401/402 graduation project, Hacettepe University EEE) — modular CHB topology, STM32 F303RE firmware, PySide6 dashboard. Hardware fabricated and bench-validated.
107 parts, built around the IR2110L4 and TLP250(F). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the asifahmad-namal2020/PCB_Design_Project repository on GitHub, at the commit this page was made from: the board is PCB Design Project/PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask asifahmad-namal2020 before reusing the design.