2 layers85 × 115 mm
OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0
2 layers57.2 × 83.3 mm
Imacro
daprice/ios-macropad5(WIP) a tiny iOS-oriented keypad using low profile mechanical keyboard switches
- Size
- 57.2 × 83.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 41
- Pads
- 130
- Tracks, vias
- 153, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Feb 2018
- Updated
- 26 Mar 2020
Overview
Imacro is an open-source printed circuit board by daprice, from the daprice/ios-macropad repository on GitHub. It is a 2-layer board of 57.2 × 83.3 mm with 29 parts on 41 nets, routed with 153 tracks and 38 vias.
It is built around the MBR120. Its parts include 13 diodes, 13 switches and 1 IC. It belongs with the keyboards and input boards of this library.
Main components
1README
README.mdAirpad
A tiny (3x4 key) bluetooth keypad using low profile mechanical keyboard switches and the Adafruit Feather 32u4 Bluefruit, intended to give you quick access to functions on your iOS device that are normally cumbersome to use. Or a companion to a 60% or smaller keyboard. Your choice.
PCB
Find the KiCad source files in the PCB folder.
Switches
This PCB uses mechanical keyswitches compatible with Kailh PG1350, commonly known as "Choc" Low Profile. These are available in various varieties and in small quantities from vendors like NovelKeys in the US.
Gerber and drill files
The files in PCB/gerbers were produced by KiCad 4.0.7 using OSH Park's recommended settings. If you have the PCB manufactured somewhere else, you may change the names of the files at the very least (your board house should provide their desired filenames and any special settings they require).
Acrylic case
The case is currently a work in progress; further documentation will be provided when it's complete.
Firmware
Firmware will be based on QMK.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1N4148 | Diodes_SMD:D_SOD-123 | D0:0, D0:1, D0:2, D1:0, D1:1, D1:2, D2:0, D2:1, D2:2, D3:0, D3:1, D3:2 |
| 12 | Choc | keyswitches:SW_PG1350 | SW0:0, SW0:1, SW0:2, SW1:0, SW1:1, SW1:2, SW2:0, SW2:1, SW2:2, SW3:0, SW3:1, SW3:2 |
| 1 | Feather32u4Bluefruit | imacro:Feather32u4Bluefruit | U1 |
| 1 | MBR120 | Diodes_SMD:D_SOD-123F | D1 |
| 1 | QI_Receiver | imacro:QI_connector | QI1 |
| 1 | TOGGLE | imacro:GPTS_SPST_Pushbutton | SW1 |
The 28 most common of 29 parts.
Similar boards
- 2 layers80 × 107.5 mm
Minino
ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.
79 parts183GPL-3.0 - 2 layers92.8 × 71.8 mm
USBSID Pico v1.3f
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
116 parts125GPL-2.0 - 2 layers87.5 × 77.5 mm
Panel
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
143 parts100BSD-3-Clause - 2 layers59.2 × 41 mm
- 2 layers22 × 66.5 mm
- 2 layers108 × 95.3 mm
Blue Wizard
wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware
47 parts38 - 2 layers80.7 × 33.5 mm
Questions
How big is the Imacro PCB?
It measures 57.2 × 83.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Imacro use?
29 parts, built around the MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Imacro KiCad files?
From the daprice/ios-macropad repository on GitHub, at the commit this page was made from: the board is PCB/imacro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Imacro design in my own project?
Its repository states no licence, so its author keeps all rights: ask daprice before reusing the design.