2 layers28 × 45 mm
NosepokeV1.0
danieltith/Neuroscience
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
29 parts
4 layers150 × 39 mm
BreakoutV1.0 removed solder paste
danieltith/NeuroscienceCode and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
- Size
- 150 × 39 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 169
- Pads
- 477
- Tracks, vias
- 2,821, 232
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Jul 2024
- Updated
- 17 Aug 2024
Overview
BreakoutV1.0 removed solder paste is an open-source printed circuit board by danieltith, from the danieltith/Neuroscience repository on GitHub. It is a 4-layer board of 150 × 39 mm with 93 parts on 169 nets, routed with 2,821 tracks and 232 vias.
It is built around the R-78E12-1.0/X9-Y, R-78E5.0-1.0 and TBD62083APG, with the PGB1010603MR, B3FS-1010P and G3VM-202J1 among its other parts. Its parts include 31 connectors, 18 resistors, 8 capacitors, 7 ICs and 6 diodes.
Main components
9R-78E12-1.0/X9-Y
SIP,11.6x7.5mmSIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
R-78E5.0-1.0
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 300uA 50mVp-p 5V 7.5mm 7V~36V 850kHz 94% Short Circuit Protection、Automatic fault recovery Step-down type ±3% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
TBD62083APG
DIP-18-40℃~+85℃ 0.1mA 1uA 1uA 2V 30V 500mA 50V 8 DIP-18 Darlington Transistor Arrays ROHSToshibaDarlington Transistor Arrays
PGB1010603MR
0603-65℃~+125℃ 0.06pF 1 150V 24V Bidirectional ESD IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
B3FS-1010P
SMD-4P,6.3x6mm-25℃~+70℃ 1N 24V 4.3mm 50mA 6.3mm 6mm Gull Wing Round Button SPST Surface Mount,Vertical SMD-4P,6.3x6mm Tactile Switches ROHSOmronTactile Switches
G3VM-202J1
SOP-8Solid State Relays (MOS Output)Omron
BAT60AE6327HTSA1
SOD-323SOD-323 Schottky Diodes ROHSInfineon TechnologiesSchottky Diodes
MUSBRM1C130
-- USB Connectors ROHSAmphenolUSB Connectors
STL9P3LLH6
PowerFLAT(3.3x3.3)-55℃~+150℃ 1 P-Channel 1V 2.615nF 22.5mΩ@4.5V 235pF 24nC@15V 30V 340pF 3W 9A P-Channel ±20V PowerFLAT(3.3x3.3) MOSFETs ROHSSTMicroelectronicsMOSFETs
README
README.mdNeuroscience
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
[Link to be inserted once publicly available]
References:
Brown LA, Hasan S, Foster RG and Peirson SN. COMPASS: Continuous Open Mouse Phenotyping of Activity and Sleep Status [version 2; peer review: 4 approved]. Wellcome Open Res (2017) 1:2. (https://doi.org/10.12688/wellcomeopenres.9892.2)
Akam T, Lustig A, Rowland JM, Kapanaiah SKT, Esteve-Agraz J, Panniello M, Márquez C, Kohl MM, Kätzel D, Costa RM, Walton ME. Open-source, Python-based, hardware and software for controlling behavioural neuroscience experiments. eLife (2022) 11:e67846. (https://doi.org/10.7554/eLife.67846)
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | Conn_01x02 | Connector_Molex:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20 |
| 6 | 100R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric | R14, R15, R16, R17, R18 |
| 5 | Conn_02x01 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J24, J25, J26, J27, J28 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C5, C6, C7, C8 |
| 4 | 2k2 | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 4 | PGB1010603MR | SamacSys_Parts:PGB1010603MR | D3, D4, D5, D6 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4 |
| 3 | B3FS-1010P | asl_footprints:6mm_tactile_smd | S1, S2, S3 |
| 3 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J2, J3, J4 |
| 3 | Conn_01x05 | Connector_Molex:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J21, J22, J23 |
| 3 | G3VM-202J1 | SamacSys_Parts:SOP254P700X210-8N | K1, K2, K3 |
| 3 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP3, JP4, JP5 |
| 3 | TBD62083APG | SamacSys_Parts:SOIC127P1030X245-18N | IC1, IC2, IC3 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | Hirose_40_pin_connector | asl_footprints:Hirose_40_pin | X1, X2 |
| 2 | I2C pullup | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP8, JP9 |
| 2 | Mult_Disable | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP10, JP11 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 5569261-1 | SamacSys_Parts:55692611 | J29 |
| 1 | BAT60AE6327HTSA1 | SamacSys_Parts:SOD2513X110N | D2 |
| 1 | Conn_01x03 | RatPub:SolderWirePad_3x_0-8mmDrill2 | J30 |
| 1 | MBR120VLSFT3G | RatPub:S-FLAT-2 | D1 |
| 1 | MUSBRM1C130 | SamacSys_Parts:MUSBRM1C130 | J1 |
| 1 | MountingHole_Pad | Wire_Pads:SolderWirePad_single_1-2mmDrill | H1 |
| 1 | P3_DIO_A or SCL | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP6 |
| 1 | P3_DIO_B or SCL | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP7 |
| 1 | PyBoard-D-Series | asl_footprints:PyBoard_D-Series | U3 |
| 1 | R-78E12-1.0_X9 | asl_footprints:Converter_DCDC_RECOM_R-78E-0.5_THT | U2 |
| 1 | R-78E5.0-1.0 | asl_footprints:Converter_DCDC_RECOM_R-78E-0.5_THT | U1 |
| 1 | RFIDRW-ettl | RatPub:RFIDRW-ettl | J31/32 |
| 1 | STL9P3LLH6 | SamacSys_Parts:STL20N6F7 | Q1 |
| 1 | STUSB4500QTR | SamacSys_Parts:QFN50P400X400X100-25N-D | IC4 |
The 91 most common of 93 parts.
More from danieltith/Neuroscience
4- 4 layers15 × 13 mm
Eib-16
danieltith/Neuroscience
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
23 parts - 2 layers106.9 × 53 mm
PIR InterfaceBoard
danieltith/Neuroscience
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
12 parts - 2 layers20.3 × 35.3 mm
PIR Board
danieltith/Neuroscience
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
11 parts
Similar boards
- 2 layers90.2 × 66.5 mm
PyControl DSeries
Karpova-Lab/pyControl-D-Series-Breakout
A breakout board for use with pyControl behavior control framework
17 parts2 - 4 layers95.9 × 90.2 mm
KENSAT EPS v1.2
kenchangh/kensat
KENSAT, Edge-AI Compute in Orbit - A 2U CubeSat that runs a large language model on-orbit. A power-gated NVIDIA Jetson Orin Nano executes neural-network inference in space, and the results are downlinked over a custom…
218 parts119 - 4 layers37.5 × 25 mm
ChristmasTreeDriver
partywagon112/ChristmasTreeDriver
Potentially an ESP32-PICO-D4 with a Matter application to drive a christmas tree. Uses USB-C PD for power.
57 parts1 - 2 layers39 × 82.5 mm
AxxSolder
holoindustry/AxxSolder_modded
Interested in purchasing an AxxSolder 3.2? On my website 5Dimensions you can purchase assembled and tested AxxSolder 3.2 boards with connectors and hardware.
147 partsGPL-3.0 - 4 layers85 × 59 mm
ESPHome Parking Assistant
mikelawrence/ESPHome-Parking-Assistant
Use a TFMini LiDAR module and a RGB light strip so you can park your car in the same spot everytime!
114 partsCERN-OHL-P-2.0 - 4 layers65 × 32 mm
OrangePi Zero3W UPS RevA before routing
ripaaf/ups-orangepizero3w
trying making a pcb ups for orangepi (its bad)
74 partsMIT - 2 layers89 × 55.5 mm
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
129 parts75CERN-OHL-W-2.0 - 2 layers89 × 55.5 mm
Mintypcb
SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…
158 parts1
Questions
How big is the BreakoutV1.0 removed solder paste PCB?
It measures 150 × 39 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BreakoutV1.0 removed solder paste use?
93 parts, built around the R-78E12-1.0/X9-Y, R-78E5.0-1.0, TBD62083APG and PGB1010603MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BreakoutV1.0 removed solder paste KiCad files?
From the danieltith/Neuroscience repository on GitHub, at the commit this page was made from: the board is Operant/Breakout/KiCad/BreakoutV1.0_removed_solder_paste.kicad_pcb and its schematic Electrophysiology/16ch EIB/KiCAD project/eib-16.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BreakoutV1.0 removed solder paste design in my own project?
Its repository states no licence, so its author keeps all rights: ask danieltith before reusing the design.