Karpova-Lab/pyControl-D-Series-Breakout2A breakout board for use with pyControl behavior control framework
PyControl DSeries is an open-source printed circuit board by Karpova-Lab, from the Karpova-Lab/pyControl-D-Series-Breakout repository on GitHub. It is a 2-layer board of 90.2 × 66.5 mm with 17 parts on 86 nets, routed with 1,049 tracks and 175 vias.
It is built around the R-78E5.0-1.0, TBD62083APG and DF40HC(4.0)-40DS-0.4V(70), with the 10118194-0001LF, B3FS-1010P and PJ-037A among its other parts. Its parts include 5 ICs, 3 connectors, 2 capacitors, 2 switches and 2 crystals.
This project is licensed under the Janelia open-source hardware license and Janelia 3-term BSD open-source software license.
Please contact innovation@janelia.hhmi.org if you have any questions about licensing or would like to use this project commercially.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | TBD62083A | asl_footprints:SSOP-18_4.4x6.5mm_P0.65mm | U3, U4, U5 |
| 2 | 10µF | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | DF40HC(4.0)-40DS-0.4V(70) | asl_footprints:Hirose_40_pin | X1U1, X2U1 |
| 2 | DIN_Rail_Adapter | asl_footprints:DIN_Clip | DRA1, DRA2 |
| 1 | 10118194-0001LF | asl_footprints:microUSB_horizontal_socket | J1 |
| 1 | 5569263-1 | asl_footprints:RJ45_12Port | J2 |
| 1 | B3FS-1010P | asl_footprints:6mm_tactile_smd | S2 |
| 1 | MBR120VLSFT3G | asl_footprints:D_SOD-123F | D1 |
| 1 | PJ-037A | asl_footprints:DC_Jack | J3 |
| 1 | R-78E5.0-1.0 | asl_footprints:Converter_DCDC_RECOM_R-78E-0.5_THT | U2 |
| 1 | TL3300DF160Q | asl_footprints:12mm_tactile_smd | S1 |
| 1 | pyboard-D-series | asl_footprints:PyBoard_D-Series | U1 |
danieltith/Neuroscience
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
ECE477Group13/hardware_pcb
GitHub backup of PCB design files (Schematic and Board files)
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
SophBG/pi-tin-mod
Personal build of jackw01's Pi Tin (3D-printed clamshell version, KiCad 10). It adds 10 RGB LEDs under the buttons, a centred speaker, a USB-drive mode for the ROMs, and ESD protection on USB, and runs on an Orange Pi…
It measures 90.2 × 66.5 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the R-78E5.0-1.0, TBD62083APG, DF40HC(4.0)-40DS-0.4V(70) and 10118194-0001LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Karpova-Lab/pyControl-D-Series-Breakout repository on GitHub, at the commit this page was made from: the board is pcb/pyControl_DSeries.kicad_pcb and its schematic pcb/pyControl_DSeries.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Karpova-Lab before reusing the design.