2 layers38.5 × 50.3 mm
Projekt AUE
hubjab21/high-speed-analog-front-end-pcb
High-speed analog front-end PCB with LMH5401 differential amplifier driving AD9211 ADC. Includes measurements and validation.
43 parts
4 layers37.5 × 25 mm
ChristmasTreeDriver
partywagon112/ChristmasTreeDriver1Potentially an ESP32-PICO-D4 with a Matter application to drive a christmas tree. Uses USB-C PD for power.
- Size
- 37.5 × 25 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 98
- Pads
- 366
- Tracks, vias
- 497, 92
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Apr 2024
- Updated
- 11 Aug 2024
Overview
ChristmasTreeDriver is an open-source printed circuit board by partywagon112, from the partywagon112/ChristmasTreeDriver repository on GitHub. It is a 4-layer board of 37.5 × 25 mm with 57 parts on 98 nets, routed with 497 tracks and 92 vias.
It is built around the ESP32-PICO-D4, MAXM17630AME+T and CP2102N-A02-GQFN28R, with the DRV8244SQRYJRQ1, CR0402AFX-1002GAS and CR0402AFX-2001GAS among its other parts. Its parts include 23 capacitors, 18 resistors, 5 ICs, 2 diodes and 2 transistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12
ESP32-PICO-D4
QFN-48-EP(7x7)-40℃~+85℃ -97dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 2.7V~3.6V 20dBm Bluetooth、WiFi SPI、I2C transceiver QFN-48-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsMAXM17630AME+T
EMGA-16(3x3)1 1A 3.3V 4.5V~36V EMGA-16(3x3) DC-DC Power Modules ROHSMaxim Integrated (Analog Devices)DC-DC Power Modules
CP2102N-A02-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃@(Ta) 1.3uA 3V~3.6V 9.5mA USB 2.0 USB to UART QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB Converters
DRV8244SQRYJRQ1
VQFN-16-HR(3x6)-40℃~+125℃ 1 1uA 21A 47mΩ Interleaved conduction protection、Current sensing/regulation function、Soft switching SPI Yes VQFN-16-HR(3x6) Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor Drivers
CR0402AFX-1002GAS
0402-55℃~+155℃ 10kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountCR0402AFX-2001GAS
0402-55℃~+155℃ 2kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountCR0402AFX-4992GAS
0402-55℃~+155℃ 49.9kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface Mount
CR0603AFX-1001ELF
0603-55℃~+155℃ 100mW 1kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountCR0402AFX-1001GAS
0402-55℃~+155℃ 1kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface Mount
RCLAMP0582B.TCT
SOT-523-40℃~+105℃ 1.2pF 100nA 11V 15A 2 20V 300W 5V IEC 61000-4-2、IEC 61000-4-4 TVS SOT-523 ESD and Surge Protection (TVS/ESD) ROHSSEMTECHESD And Surge Protection (TVS/ESD)CR0402AJ/-000GLF
0402Chip Resistor - Surface MountBourns
2450AT18A0100001E
12060.5dBi 1.3mm 1.6mm 100MHz 2.4GHz 2W 3.2mm 50Ω Patch Antenna 1206 Antennas ROHSJohanson DielectricsAntennas
README
README.mdChristmas Tree Driver
This really should get renamed, but the idea is to create a Matter based H-Bridge driver for my Home Assistant to control my Christmas tree lights at the end of the year.
Very much an in-progress effort...
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C5, C7, C9, C10, C17, C19, C20 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R12, R13, R15, R20 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C4, C11, C12, C13 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C6, C8, C18 |
| 3 | 220nF | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16 |
| 3 | 2k | Resistor_SMD:R_0402_1005Metric | R1, R2, R14 |
| 3 | 49.9k | Resistor_SMD:R_0402_1005Metric | R9, R10, R25 |
| 2 | - | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R21, R24 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R18, R19 |
| 2 | 20k | Resistor_SMD:R_0402_1005Metric | R23, R26 |
| 2 | EVQPUC | Button_Switch_SMD:Panasonic_EVQPUL_EVQPUC | SW1, SW2 |
| 2 | RCLAMP0582B.TCT | Package_TO_SOT_SMD:SOT-416 | D1, D2 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2450AT18A0100001E | RF_Antenna:Johanson_2450AT18x100 | AE1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 5.6n | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | BC817RAPNZ | PCM_PartyWagon112_DFN:DFN1412-6 | Q2 |
| 1 | CP2102N-A02-GQFN28R | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm_ThermalVias | U3 |
| 1 | DRV8244S | PCM_PartyWagon112_VQFN:VQFN-16_RYJ_TEX | U5 |
| 1 | ESP32-PICO-D4 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm_ThermalVias | U4 |
| 1 | M8S-03PMMR-SF8001 | Connector_Amphenol:Amphenol_M8S-03PMMR-SF8001 | J1 |
| 1 | MAXM17630AME+ (3.3V) | PCM_PartyWagon112_VQFN:16-eMGA (3x3) | U2 |
| 1 | MPZ1608D101BTD25 | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | STL9P3LLH6 | PCM_PartyWagon112_Package_SON:ST_PowerFlat-8 | Q1 |
| 1 | STUSB4500QTR | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U1 |
| 1 | USB4105 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
Similar boards
- 2 layers19.1 × 17.6 mm
Motor driver
Froggy111/RBC-soccer-2025
software and hardware for team BotByWire, Robocup Junior Soccer Lightweight 2025
9 parts - 2 layers83 × 100 mm
- 2 layers83 × 100 mm
- 4 layers95.9 × 90.2 mm
KENSAT EPS v1.2
kenchangh/kensat
KENSAT, Edge-AI Compute in Orbit - A 2U CubeSat that runs a large language model on-orbit. A power-gated NVIDIA Jetson Orin Nano executes neural-network inference in space, and the results are downlinked over a custom…
218 parts119 - 4 layers150 × 39 mm
BreakoutV1.0 removed solder paste
danieltith/Neuroscience
Code and hardware files related to my PhD thesis: "Mapping associations between early life adversity and alcohol use disorder through human epidemiology and rat neurobiology".
93 parts - 2 layers39 × 82.5 mm
AxxSolder
holoindustry/AxxSolder_modded
Interested in purchasing an AxxSolder 3.2? On my website 5Dimensions you can purchase assembled and tested AxxSolder 3.2 boards with connectors and hardware.
147 partsGPL-3.0 - 4 layers85 × 59 mm
ESPHome Parking Assistant
mikelawrence/ESPHome-Parking-Assistant
Use a TFMini LiDAR module and a RGB light strip so you can park your car in the same spot everytime!
114 partsCERN-OHL-P-2.0
Questions
How big is the ChristmasTreeDriver PCB?
It measures 37.5 × 25 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ChristmasTreeDriver use?
57 parts, built around the ESP32-PICO-D4, MAXM17630AME+T, CP2102N-A02-GQFN28R and DRV8244SQRYJRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ChristmasTreeDriver KiCad files?
From the partywagon112/ChristmasTreeDriver repository on GitHub, at the commit this page was made from: the board is hardware/christmastreedriver.kicad_pcb and its schematic hardware/Bridge_Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ChristmasTreeDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask partywagon112 before reusing the design.