Skip to the content
4 layers30 × 84 mmSTM32, the printed circuit board in 3D

These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

Size
30 × 84 mm
Copper layers
4
Thickness
1.6 mm
Parts
49
Nets
139
Pads
255
Tracks, vias
178, 24
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 May 2026
Updated
21 May 2026

Overview

STM32 is an open-source printed circuit board by cuteboy0323, from the cuteboy0323/1590A repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 30 × 84 mm with 49 parts on 139 nets, routed with 178 tracks and 24 vias.

It is built around the PCM3060PW and LP2985-50DBV. Its parts include 23 capacitors, 14 resistors, 5 connectors, 4 ICs and 1 inductor. It belongs with the STM32 boards of this library.

Main components

2

README

README.md

Random guitar pedal board designs for 1590A enclosures

[!NOTE] This repository is no longer maintained in favor for GuitarPedal.

Electrical

These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch. I don't actually play guitar, but guitar pedal kits were fun to solder, and that then turned into "I want to actually understand what they do"...

[!NOTE] I'm not soldering wires together like some kind of animal --- thus PCBs designed in KiCad.

And not only don't I solder wires, I like surface-mount components. And not just because some newer stuff isn't even available in through-hole form any more.

Everything is designed to be "hand-soldered" --- although your definition of hand-soldering may differ from mine. The boards are double-sided, but surface mount components are only on one side, typically with the other side used only for connectors and the like.

I do these without a stencil. It's entirely doable, and I'm consciously limiting myself to fairly simple footprints

The design is split up into a "base board" and "effects boards", because the 1590A is pretty tight.

The base board should work with any of the effect boards, and is purely about the connectors and stomp switch with true bypass.

The base board does nothing to the signal (apart from the purely physical switching of the stomp switch), and only does some very basic reverse polarity protection and has some capacitors for the 9V power supply.

The effects boards are random "Linus is testing things he doesn't know anything about".

  • There's a random "Fuzz" board that I may still play around with, which just does some random signal clipping with a diode. I'm keeping that one around just as a starting point for other potential boards.

  • There's an "Octaver" board that is just a signal rectifier. I started out doing those with a op-amp based precision rectification circuit, but now it's a dual transistor discrete circuit instead.

    The rectification is objectively worse, but it's not like it made the sound any better, and the circuit is much more interesting.

  • There's a plain "clean boost" thing, which should be clean until the boosting starts to clip. Which happens pretty quickly since it's a pretty aggressive 25dB boost - assuming my simulation matches reality, which it might not do.

All of this has been tested and found lacking. But now my simulation is much better, and includes some real audio samples. That didn't make any of the circuits sound better, but once you realize that any sane modern guitar pedals are all digital, and that this is just to learn the basics of transistors etc, that's all good.

Mechanicals

These are all trivial two-layer boards. They could be single-sided with very little routing problem, but that would only complicate things for no gain.

It's not like I would ever want to even try to etch boards at home any more, because while I go for "large" components, that's still very relative. Etching boards is messy and doing it with the precision needed for smd is just too painful to be worth it. See below on components.

So just use JLCPCB or your favorite other board house.

Components

Connectors and potentiometers are typically from Tayda Electronics, with most of the actual common SMD components from kits or from Mouser.

For "random" SMD capacitors and resistors, get one of the kits. I can personally heartily recommend the Guanruixin kits from Amazon: there are 0805 and 1206 kits of both capacitors and resistors, and I love the packaging and labeling. Very good for organizing at a hobbyist level.

The AideTek kits are good too, but the Guanruixin ones are really compact for those "get all the values just in case" situations.

Then just go to Mouser or Digikey and buy cut tape for the values you use more of. You'll run out of the common resistors in the kits, but they are still worth having for the less usual ones and just for the organizing.

And things that are just a bit more specialized - like the the C0G caps in higher capacitances - you won't find in the kits.

Also, while I'm doing discrete components, I still consider "dual diodes" etc to be discrete. In fact I much prefer those for things like diodes and transistors when possible (and if you want matched pairs obviously make those a requirement - I realize some people do the manual matching, but that's not for me).

I've picked SOT-23-6 packages over SOT-363 or SOT-563 because I find that my limit for enjoying the soldering is at about the 1mm pin pitch. The 0.65mm or 0.5mm pitch stuff ends up being just annoying.

The resistors are all 0805 size, and capacitors are all over the place: smaller capacitors in the pF or nF range are 0805, bigger ones are 1206, and I ended up with 0.1uF C0G in 0704 because it was a common cap choice for both signal re-biasing and for op-amp bypassing, and doing 1206 was actually taking up noticeable amounts of board space in some cases.

Electro-mechanical:

  • Tayda A-6976: 1/4" thread lock panel mount mono jack CK635008

  • Tayda A-1848 etc: ALPHA 9mm PCB-mount potentiometers

  • Tayda A-4191: ALPHA 3PDT latching stomp switch.

  • Tayda A-3670 etc: 1M series mini toggle switches and the sub-mini 2M series for the side switch.

  • Wuerth 694106301002 9V DC power jack

  • Hammond 1590A enclosure. There are drill patterns that work here: "Tayda drill patterns"

Parts

49
QtyValueFootprintReferences
9100nFCapacitor_SMD:C_0603_1608MetricC102, C104, C301, C302, C303, C304, C305, C307, C311
510uFCapacitor_SMD:C_0603_1608MetricC103, C105, C106, C107, C306
4220kResistor_SMD:R_0603_1608MetricR401, R404, R405, R406
4Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ101, J102, J103, J104
31uFCapacitor_SMD:C_0603_1608MetricC108, C401, C402
322RResistor_SMD:R_0603_1608MetricR101, R304, R305
210pFCapacitor_SMD:C_0603_1608MetricC309, C310
21MEGResistor_SMD:R_0603_1608MetricR402, R403
222uFCapacitor_SMD:C_0603_1608MetricC101, C308
25.1kResistor_SMD:R_0603_1608MetricR302, R303
25R1Resistor_SMD:R_0603_1608MetricR301, R306
110nFCapacitor_SMD:C_0603_1608MetricC109
11590AMylib:1590ABox101
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY301
11kResistor_SMD:R_0603_1608MetricR102
12.2uFCapacitor_SMD:C_0603_1608MetricC110
13.3uHInductor_SMD:L_Sunlord_SWPA3015SL101
1LMR50410Package_TO_SOT_SMD:SOT-23-6U101
1LP2985-5.0Package_TO_SOT_SMD:SOT-23-5U102
1PCM3060Package_SO:TSSOP-28_4.4x9.7mm_P0.65mmU401
1STM32H750VBTxPackage_QFP:LQFP-100_14x14mm_P0.5mmU201
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4085J301

More from cuteboy0323/1590A

8
  • 2 layers30 × 84 mmBuffered, the printed circuit board in 3D

    Buffered

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    47 partsGPL-2.0
  • 2 layers30 × 62 mmCompressor, the printed circuit board in 3D

    Compressor

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    36 partsGPL-2.0
  • 2 layers30 × 84 mmDaisySeed, the printed circuit board in 3D

    DaisySeed

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    32 partsGPL-2.0
  • 2 layers30 × 55 mmOctaver, the printed circuit board in 3D

    Octaver

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    25 partsGPL-2.0
  • 2 layers30 × 62 mmBoost, the printed circuit board in 3D

    Boost

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    23 partsGPL-2.0
  • 2 layers30 × 84 mmPlain, the printed circuit board in 3D

    Plain

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    18 partsGPL-2.0
  • 2 layers30 × 62 mmFuzzy, the printed circuit board in 3D

    Fuzzy

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    13 partsGPL-2.0
  • 2 layers30 × 84 mmDaisySeed, the printed circuit board in 3D

    DaisySeed

    cuteboy0323/1590A

    These are not at all useful, but having done guitar pedal board kit builds, I decided I should try to make something from scratch.

    7 partsGPL-2.0

Similar boards

  • 2 layers73 × 99.8 mmSodium, the printed circuit board in 3D

    Sodium

    kanengomibako/Sodium

    85 parts14Unlicense
  • 4 layers100 × 100 mmIdeal groove box, the printed circuit board in 3D

    Ideal groove box

    centrevillage/ideal-groove-box

    理想のグルーブボックスは俺たちの手で作る

    180 parts10MIT
  • 2 layers100 × 80 mmDeltaSDR, the printed circuit board in 3D

    DeltaSDR

    cernohorsky/DeltaSDR

    HF Software Defined Radio Transceiver that includes ADC and DAC circuits. No soundcard is needed. Board communicates only trough one USB cable.

    180 parts9
  • 4 layers40 × 68 mmKit Brainboard, the printed circuit board in 3D

    Kit Brainboard

    4ms/mp153-brainboard-pcb

    PCB for STM32MP153 brainboard

    248 parts
  • 4 layers88 × 60 mmCombined, the printed circuit board in 3D

    Combined

    activexray/hyperactive_radio

    Firmware for experimental ISM-band audio transmission

    55 parts
  • 4 layers80 × 38 mmIntercat, the printed circuit board in 3D

    Intercat

    BarceP/CAT_Interface

    CAT Interface for HAM Radio, USB-C

    99 partsCERN-OHL-S-2.0
  • 2 layers65 × 56.5 mmRPi Ham, the printed circuit board in 3D

    RPi Ham

    bitbyt3r/RPi-Ham

    Board to interface the Raspberry Pi with up to two HAM radios

    47 parts

Questions

How big is the STM32 PCB?

It measures 30 × 84 mm and has 4 copper layers, 1.6 mm thick.

What parts does the STM32 use?

49 parts, built around the PCM3060PW and LP2985-50DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32 KiCad files?

From the cuteboy0323/1590A repository on GitHub, at the commit this page was made from: the board is Effect/STM32/STM32.kicad_pcb and its schematic Base/Buffered/Buffered.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32 design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).