2 layers44.9 × 95.6 mm
Bluetoothkiste
julianschick/bluetoothkiste
Bluetooth-Box für Segelflugzeuge zur Kommunikation mit LX und FLARM
62 parts5MIT
2 layers65 × 56.5 mm
RPi Ham
bitbyt3r/RPi-HamBoard to interface the Raspberry Pi with up to two HAM radios
- Size
- 65 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 95
- Pads
- 279
- Tracks, vias
- 687, 27
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jun 2019
- Updated
- 23 Jun 2019
Overview
RPi Ham is an open-source printed circuit board by bitbyt3r, from the bitbyt3r/RPi-Ham repository on GitHub. It is a 2-layer board of 65 × 56.5 mm with 47 parts on 95 nets, routed with 687 tracks and 27 vias.
It is built around the MAX232N, PCM3060PW and RJ45. Its parts include 19 capacitors, 14 connectors, 6 resistors, 2 ICs and 2 switches. It belongs with the radio and wireless boards of this library.
Main components
3
MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
PCM3060PW
TSSOP-28-25℃~+85℃ 16kHz~192kHz 2.7V~3.6V、4.5V~5.5V Encoder/decoder Serial TSSOP-28 Audio Interface ICs ROHSTexas InstrumentsAudio Interface ICs
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13, C14, C15, C16, C17 |
| 5 | MountingHole_2.7mm_M2.5_Pad_Via | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | J10, J11, J12, J13, J15 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C7, C8, C10 |
| 4 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J2, J4, J5, J7 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6, C9 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6 |
| 2 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.4 | C18, C19 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 2200Ohm,200mA | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11, C12 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J3 |
| 2 | Conn_02x08_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J6, J9 |
| 2 | SILxx-1Axx-71x | Relay_THT:Relay_SPST_StandexMeder_SIL_Form1A | K1, K2 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 12.288 MHz | Crystal:Crystal_SMD_0603-4Pin_6.0x3.5mm_HandSoldering | X1 |
| 1 | 220K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 47R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | LOGO | RPi-Ham:logo | G*** |
| 1 | MAX232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | PCM3060 | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J8 |
Similar boards
- 2 layers73 × 99.8 mm
- 4 layers100 × 100 mm
- 2 layers100 × 80 mm
DeltaSDR
cernohorsky/DeltaSDR
HF Software Defined Radio Transceiver that includes ADC and DAC circuits. No soundcard is needed. Board communicates only trough one USB cable.
180 parts9 - 4 layers75 × 95 mm
- 4 layers40 × 68 mm
- 4 layers88 × 60 mm
- 4 layers80 × 38 mm
Questions
How big is the RPi Ham PCB?
It measures 65 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RPi Ham use?
47 parts, built around the MAX232N, PCM3060PW and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RPi Ham KiCad files?
From the bitbyt3r/RPi-Ham repository on GitHub, at the commit this page was made from: the board is RPi-Ham/RPi-Ham.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RPi Ham design in my own project?
Its repository states no licence, so its author keeps all rights: ask bitbyt3r before reusing the design.