Skip to the content

Boards by crteensy

21 boards

Open-source boards designed in KiCad by crteensy on GitHub, from 12 repositories. A board’s address here is its repository’s there.

  • 4 layers17.5 × 24.8 mmELRS ESP8285 PWM5, the printed circuit board in 3D

    ELRS ESP8285 PWM5

    crteensy/ELRS-8285-1280-5xPWM

    ELRS receiver with an SX1280/1281 and 5 PWM outputs, based on the ESP8285.

    56 parts20MIT
  • 4 layers20 × 20 mmELRS Rx 4PWM ESC 1S rev1.0, the printed circuit board in 3D

    ELRS Rx 4PWM ESC 1S rev1.0

    crteensy/ELRS-8285-1280-PWM-ESC

    A 2.4 GHz ELRS resceiver with PWM output and a 1S, 5A ESC

    83 parts13MIT
  • 6 layers36 × 36 mmUltimateFC, the printed circuit board in 3D

    UltimateFC

    crteensy/yolo-chonker

    betaflight developer FC for the H735

    245 parts10CC-BY-SA-4.0
  • 4 layers15 × 16.5 mmESC single F051T8Yx, the printed circuit board in 3D

    ESC single F051T8Yx

    crteensy/ESC-single-F051T8Yx

    An ESC prototype based on the F051 in WLCSP-36, for AM32. NCP81253, SIZF360

    58 parts7MIT
  • 8 layers30.4 × 25.2 mmUltimateFC, the printed circuit board in 3D

    UltimateFC

    crteensy/yolo-fc

    Yolo FC

    194 parts7CC-BY-SA-4.0
  • 8 layers31.3 × 26 mmUltimateFC v2, the printed circuit board in 3D

    UltimateFC v2

    crteensy/yolo-fc_1-3S

    1-3S capable variant of the Yolo flight controller

    192 parts4CC-BY-SA-4.0
  • 4 layers10 × 12 mmHypaLoc, the printed circuit board in 3D

    HypaLoc

    crteensy/HypaLoc

    A tiny GNSS/magnetometer combo

    24 parts3MIT
  • 4 layers12.5 × 10 mmIota XLR9, the printed circuit board in 3D

    Iota XLR9

    crteensy/Iota-XLR9

    a small elrs receiver

    44 parts3MIT
  • 2 layers25.4 × 12.7 mmEFM8BB21F16-breakout, the printed circuit board in 3D

    EFM8BB21F16-breakout

    crteensy/EFM8BB21F16-breakout

    A simple breakout board for the EFM8BB21F16 (QFN-20) MCU

    10 parts2
  • 4 layers33 × 45.7 mmNCP81161-PWMEN LFPAK33-breakout, the printed circuit board in 3D

    NCP81161-PWMEN LFPAK33-breakout

    crteensy/NCP81161-PWMEN-LFPAK33-breakout

    Breakout board for NCP81161 gate drivers with PWM and EN inputs and FETs in LFPAK33 like the PSMN1R8-30MLH

    59 parts1MIT
  • 2 layers29 × 44 mmDrv lfpak33, the printed circuit board in 3D

    Drv lfpak33

    crteensy/NCP81xxx-3St-LFPAK33-breakout

    Breakout board for gate drivers like NCP81253 or NCP81161 with 3-state PWM input and FETs in LFPAK33 like the PSMN1R8-30MLH

    45 partsMIT
  • 2 layers39.4 × 16.5 mmSTM32G071GBU6 breakout, the printed circuit board in 3D

    STM32G071GBU6 breakout

    crteensy/STM32G071GBU6_breakout

    Breakout board for the STM32G071GBU6

    14 partsMIT
  • 2 layers6.7 × 5.3 mmPadadapters, the printed circuit board in 3D

    Padadapters

    crteensy/yolo-fc

    Yolo FC

    6 parts7CC-BY-SA-4.0
  • 8 layers25 × 11 mmEsc v0.1, the printed circuit board in 3D

    Esc v0.1

    crteensy/yolo-fc_1-3S

    1-3S capable variant of the Yolo flight controller

    63 parts4CC-BY-SA-4.0
  • 8 layers15 × 20 mmSchaltwandler, the printed circuit board in 3D

    Schaltwandler

    crteensy/yolo-fc_1-3S

    1-3S capable variant of the Yolo flight controller

    51 parts4CC-BY-SA-4.0
  • 8 layers28.4 × 24.2 mmStecker, the printed circuit board in 3D

    Stecker

    crteensy/yolo-fc_1-3S

    1-3S capable variant of the Yolo flight controller

    147 parts4CC-BY-SA-4.0
  • 8 layers28.4 × 24.9 mmUltimate fc siz322, the printed circuit board in 3D

    Ultimate fc siz322

    crteensy/yolo-fc_1-3S

    1-3S capable variant of the Yolo flight controller

    134 parts4CC-BY-SA-4.0
  • 8 layers30.4 × 25.2 mmUltimateFC, the printed circuit board in 3D

    UltimateFC

    crteensy/yolo-fc_1-3S

    1-3S capable variant of the Yolo flight controller

    190 parts4CC-BY-SA-4.0
  • 8 layers31.3 × 26 mmUltimateFC v1, the printed circuit board in 3D

    UltimateFC v1

    crteensy/yolo-fc_1-3S

    1-3S capable variant of the Yolo flight controller

    172 parts4CC-BY-SA-4.0