

CPU6502
Neuauflage des NDR KLEIN COMPUTER
- Size
- 145 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 86
- Pads
- 436
- Tracks, vias
- 789, 96
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Oct 2017
- Updated
- 25 Oct 2025
Overview
CPU6502 is an open-source printed circuit board by Creep69, from the Creep69/NKC repository on GitHub. It is a 2-layer board of 145 × 85 mm with 99 parts on 86 nets, routed with 789 tracks and 96 vias.
It is built around the 74LS245SC, 74LS74PC and 74LS00SC, with the 74LS04PC and TL7705AID among its other parts. Its parts include 12 capacitors, 10 ICs, 7 connectors, 2 resistors and 2 crystals.
Main components
574LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip Flops74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInvertersTL7705AID
SOIC-8-40℃~+85℃ 1 1.2ms 3.5V~18V 4.55V Active Low Manual reset input Open-drain Voltage monitor SOIC-8 Supervisor and Reset ICs ROHSTexas InstrumentsSupervisor And Reset ICs
README
README.mdNKC
Neuauflage des NDR KLEIN COMPUTER
Hier sollen Hardware- und Softwareprojekte zum NDR Klein Computer ihren Platz finden.
Weitere Mitstreiter sind herzlich willkommen!
Links:
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3, C4, C5, C6, C8, C9, C10, C11, C12 |
| 3 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U6, U8, U9 |
| 2 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2 |
| 2 | 74LS74 | Package_DIP:DIP-14_W7.62mm | U3, U10 |
| 1 | /W_R/W | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | 47µ | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C13 |
| 1 | 4x3k3 | Resistor_THT:R_Array_SIP5 | RN1 |
| 1 | 6502 | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | 6502/65c02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U5 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U4 |
| 1 | 74LS688 | Package_DIP:DIP-20_W7.62mm | U2 |
| 1 | 8x 3k3 | Resistor_THT:R_Array_SIP9 | RN2 |
| 1 | ACO-4MHz | Oscillator:Oscillator_DIP-14 | X1 |
| 1 | CXO_4MHz | Oscillator:Oscillator_DIP-8 | X2 |
| 1 | Conn_A1 | rene:Lötbrücke_8_2 | J8 |
| 1 | Conn_A2 | rene:Lötbrücke_8_2 | J9 |
| 1 | Conn_CLK | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | JP3 |
| 1 | Conn_D | rene:Lötbrücke_8_2 | J6 |
| 1 | Conn_IO_Address | rene:PinHeader_2x08_P2.54mm_Vertical-gespiegelt | J12 |
| 1 | Conn_Proto | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J13 |
| 1 | NKC-BUS-full | rene:NKC-BUS-full | J2 |
| 1 | RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J11 |
| 1 | SW_RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TL7705A | Package_DIP:DIP-8_W7.62mm | U11 |
The 39 most common of 99 parts.
More from Creep69/NKC
2- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

Similar boards
- 2 layers365.1 × 203.2 mm

DIAG
Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.
150 parts172 - 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 2 layers350 × 224.3 mm

- 4 layers243.8 × 170.2 mm

- 4 layers203.2 × 105.4 mm

- 2 layers99.7 × 99.1 mm

C64 Z80 Module
tebl/C64-CPM-Cartridge
A recreation of the CP/M cartridge for the Commodore 64.
34 parts27 - 2 layers134.6 × 106.4 mm

Renovation ssi 2001
roybaer/renovation_ssi_2001
Innovation SSI-2001 replica that can be built without vintage components
95 parts26 - 4 layers194.5 × 188.6 mm

MyCpu
fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.
162 parts18MIT
Questions
How big is the CPU6502 PCB?
It measures 145 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CPU6502 use?
99 parts, built around the 74LS245SC, 74LS74PC, 74LS00SC and 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CPU6502 KiCad files?
From the Creep69/NKC repository on GitHub, at the commit this page was made from: the board is HW/CPU6502/kicad/CPU6502.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CPU6502 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Creep69 before reusing the design.