Skip to the content
2 layers100 × 100 mmTime, the printed circuit board in 3D

One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
115
Pads
285
Tracks, vias
455, 73
Pours
276
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Mar 2026
Updated
3 Nov 2026

Overview

Time is an open-source printed circuit board by crankery, from the crankery/crank68 repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 25 parts on 115 nets, routed with 455 tracks and 73 vias.

It is built around the ATTINY85-15M, 74LS245SC and 74LS573PC, with the DS12885N+, MC6840CP and CR2032 among its other parts. Its parts include 7 capacitors, 7 ICs, 3 connectors, 2 crystals and 1 resistor. It belongs with the AVR (ATmega, ATtiny) and FPGA and CPLD boards of this library.

Main components

6

README

README.md

C68

One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

It's going to be pretty useless but it's fun to play around with all of this.

Hardware

So, this isn't intended to be historically accurate or anything. It's a 1970s CPU but I'll use modern components where it makes things simpler. So, for whatever reason I thought it'd be nice to use things like the MC6850, MC6821 and other components that would have been available when the M6800 was being used in the industry. But really, I'm just trying to avoid using microcontrollers that would render the actual CPU hopelessly redundant.

One place I used a microcontroller is on the terminal board. It's just being used to produce DVI video and render text. Oh, it also does the keyboard matrix scan. It has its one job and that's to replace a glass terminal. So, since it's busy doing dumb terminal stuff it doesn't really matter that it's anacronistic... right?

The computer is split up across a bunch of 100x100mm boards. This is an attempt to reduce the cost of production as that's the maxiumum size the Chinese fabs will produce at bargain pricing. The one exception (thus far) is the actual keyboard; its dimensions are dictated by the keyboard layout.

I'm currently using some SPLDs as there were analogs of these back in the day. I am using them for decode logic for the most part but I'm trying to replace them with simple 74 series logic slowly.

Boards

As previously mentioned, the computer is built upon a set of cards. These cards are generally single function so there's a lot of them.

Backplane

The backplane is a simple board with a bunch of slots on it. Each board will plug into this board. The boards are setup to be chained together. The slots are 13.5mm apart giving about 12mm of component height for each board. If a board grows taller than this or has multiple layers, it will block the next slot. This is tall enough to allow for most common components though.

The left side of each board is allowed to host connectors. This allows for connecting I/O devices to individual boards such as parallel ports, serial ports, video output or sound output.

Status: C68BP.01 sent to production

Processor

This board hosts the Motorola M6800 CPU and the MC6875 clock generator along with an oscillator running at 4MHz. This will result in a 1MHz system clock.

Status: C68CPU.01 sent to production

Memory

Lower 48KB of RAM (in FRAM), 8KB ROM (EEPROM)

Status: C68MEM.01 sent to production

Banked Memory

1 MB of batery backed SRAM presented in two four KB windows in the main address space.

Status: Finalized design

Math

AMD AM9511 FPU

Status: design in progress

Sound

This is a sound board. I'm still trying to decide which chip(s) to use. The YM2149 OPL2, Philips SAA1099, GI AY-3-8910 SGM

Status: spitballing

IO

2xACIA MC6850, 2xPIA MC6821

Status: design completed

Time

A DS12885 RTC and a MC6850 PTC.

Status: design completed

Front Panel

blinkenlights and switches and buttons.

Status: in progress

Terminal

Using a Raspberry PI Pico with PicoDVI to generate the terminal's video and to perform keyboard scans. Uses an on-board MC6850 for communication to the host system.

Status: sent to production

Software

The software for this project includes some old stuff and some new stuff. The old stuff is being "translated" into a VASM 6800 standard syntax while the new stuff is being written that way.

Emulator

emu is a very basic M6800 emulator and is being used to verify software development. It isn't complete yet and will halt when it encounters an unimplemented instruction.

It is designed to match the actual computer's IO and memory access and will do the minimum to make things appear as they will in reality. So, the ACIA status and control registers set the flags appropriately while the actual rate of transfer isn't worried about.

New Stuff

C68 BIOS

Old Stuff

MIKBUG2
Micro Basic

Tools

Everything is being done using open source tools. This includes, but is not limited to:

  • kicad
  • vasm
  • vlink
  • galasm
  • minipro
  • GCC

Parts

25
QtyValueFootprintReferences
7100nF0-Footprints:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2, C3, C4, C5, C6, C7
110K0-Footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
132.768KHz0-Footprints:Oscillator_DIP-14Y2
132.768KHz/6pF0-Footprints:Crystal_AT310_D3.0mm_L10.0mm_Horizontal_1EP_style2Y1
174LS2450-Footprints:DIP-20_W7.62mmU3
174LS5730-Footprints:DIP-20_W7.62mmU2
1ATtiny850-Footprints:DIP-8_W7.62mmU8
1Buss0-Footprints:CardJ1
1CR20320-Footprints:BatteryHolder_Keystone_1060_1x2032BT1
1ClearConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJP1
1DS128850-Footprints:DIP-24_W15.24mmU1
1GAL22V100-Footprints:DIP-24_W7.62mmU4
1Logo0-Footprints:crankery_smallG2
1Logo0-Footprints:CrankG1
1MC68210-Footprints:DIP-40_W15.24mmU7
1MC68400-Footprints:DIP-28_W15.24mmU6
1OSC0-Footprints:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP2
1Parallel0-Footprints:PinHeader_1x12_P2.54mm_HorizontalJ3
1Timers0-Footprints:PinHeader_1x12_P2.54mm_HorizontalJ2

More from crankery/crank68

12
  • 2 layers290.3 × 119.1 mmKeyboard, the printed circuit board in 3D

    Keyboard

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    162 partsMIT
  • 2 layers100 × 100 mmFront, the printed circuit board in 3D

    Front

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    60 partsMIT
  • 2 layers100 × 100 mmSound, the printed circuit board in 3D

    Sound

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    58 partsMIT
  • 2 layers100 × 100 mmBankedMemory, the printed circuit board in 3D

    BankedMemory

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    44 partsMIT
  • 2 layers100 × 100 mmTerminal, the printed circuit board in 3D

    Terminal

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    38 partsMIT
  • 2 layers100 × 100 mmBusDepot, the printed circuit board in 3D

    BusDepot

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    35 partsMIT
  • 2 layers100 × 100 mmProcessor, the printed circuit board in 3D

    Processor

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    32 partsMIT
  • 2 layers100 × 100 mmCrank68, the printed circuit board in 3D

    Crank68

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    30 partsMIT
  • 2 layers100 × 100 mmCrank68, the printed circuit board in 3D

    Crank68

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    29 partsMIT
  • 2 layers100 × 100 mmRTC, the printed circuit board in 3D

    RTC

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    28 partsMIT
  • 2 layers100 × 100 mmMath, the printed circuit board in 3D

    Math

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    26 partsMIT
  • 2 layers100 × 65 mmCrank68, the printed circuit board in 3D

    Crank68

    crankery/crank68

    One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.

    22 partsMIT

Similar boards

  • 2 layers86.4 × 38.1 mmRTC8088, the printed circuit board in 3D

    RTC8088

    spark2k06/RTC8088

    Real Time Clock for your PC XT. Very low profile, simple and open hardware.

    11 parts33GPL-3.0
  • 2 layers172.7 × 218.4 mmAT386SX, the printed circuit board in 3D

    AT386SX

    Toysoft/mb386sx-rc2016

    The origin of this project is the M396F motherboard replica by Marco Both. Marco replicated the PCB layout of a certain revision of M396F motherboard. He didn't provide the schematic.

    150 parts
  • 2 layers248.9 × 139.7 mm6809 Plus EPROM Version, the printed circuit board in 3D

    6809 Plus EPROM Version

    roberto314/GIMIX_reproduction

    Reproducing SS-50 and SS-30 cards and GIMIX Ghost Case and Mainboard

    167 parts1BSD-2-Clause
  • 2 layers118.1 × 73.7 mm6502 computer, the printed circuit board in 3D

    6502 computer

    sebobialy/6502_computer

    Simple 6502 DIY computer for peripherial prototyping

    57 partsMIT
  • 2 layers62.2 × 49.5 mmMicroKit09Serial, the printed circuit board in 3D

    MicroKit09Serial

    electrickery/MicroKit09MK2

    A recreation of an MC6809 Single Board Computer from the 1980's

    17 parts1
  • 2 layers99.1 × 10.2 mmIsa8 lpt com rtc, the printed circuit board in 3D

    Isa8 lpt com rtc

    cazacov/isa8_lpt_com_rtc

    ISA 8-bit Card with LPT, COM ports and real time clock

    26 parts1MIT
  • 4 layers273 × 178 mmPico thing, the printed circuit board in 3D

    Pico thing

    markrvmurray/pico-thing

    An 8-bit MC6809E / HD6309E single-board computer with a pair of Raspberry Pi Pico 2 (RP2350 / Pimoroni PGA2350) modules acting as intelligent bus peripherals, a 1–2 MB banked-RAM DAT/MMU, a 40-pin PATA hard-disk…

    206 parts1BSD-2-Clause
  • 2 layers99.1 × 59.7 mmRC1 Real Time Clock, the printed circuit board in 3D

    RC1 Real Time Clock

    tebl/RC-ONE

    A recreation of the MOS KIM-1 microcomputer, the start of the Commodore-line of computers. Complete with hex keypad, six digit displays and a lot of 8-bit fun!

    28 parts25

Questions

How big is the Time PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Time use?

25 parts, built around the ATTINY85-15M, 74LS245SC, 74LS573PC and DS12885N+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Time KiCad files?

From the crankery/crank68 repository on GitHub, at the commit this page was made from: the board is Time/Time.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Time design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).