

Gear40
All Gear series keyboards are being uploaded.
- Size
- 269.9 × 93.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 217
- Nets
- 170
- Pads
- 968
- Tracks, vias
- 1,517, 167
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Aug 2024
- Updated
- 17 Sep 2025
Overview
Gear40 is an open-source printed circuit board by cosmosalad, from the cosmosalad/GearSeries repository on GitHub. It is a 2-layer board of 269.9 × 93.1 mm with 217 parts on 170 nets, routed with 1,517 tracks and 167 vias.
It is built around the RP2040, W25Q128JVPIQ and W25Q128JVSIQ, with the SRV05-4, XC6206P332MR and TYPE-C-31-M-14 among its other parts. Its parts include 44 diodes, 32 capacitors, 18 resistors, 12 connectors and 10 ICs. It belongs with the keyboards and input and robots and motor control boards and the RP2040 boards of this library.
Main components
8RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASHW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTYPE-C-31-M-14
SMD-30℃~+80℃ 1 10,000 cycles 16P 1A 30V 7.96mm Female Laminated board Type-C SMD USB Connectors ROHSHRO ElectronicsUSB ConnectorsMF-MSMF050-2
1812-40℃~+85℃ 100A 150mΩ 15V 1A 1Ω 3.2mm 5.4mm 500mA 1812 Resettable Fuses ROHSBournsResettable FusesX322512MSB4SI
SMD3225-4P-40℃~+85℃ 12MHz 20pF 80Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
README
README.mdGear Keyboards
All Gear series keyboards are being uploaded.
Gear80
Gear60
Gearpad
Gear40(Split Keyboard)
Gear80-M(mini Keyboard)
Onekey(천지인 한손키보드)
- Onekey v1.0
Parts
217| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | D_Small | mcu:D_SOD-123_new | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +28 |
| 42 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX23, MX24 +26 |
| 42 | choc_SW_solder | PCM_marbastlib-choc:SW_choc_v1_1u_new | CH1, CH2, CH10, CH11, CH12, CH13, CH14, CH15, CH16, CH17, CH18, CH19, CH20, CH21, CH23, CH24 +26 |
| 18 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C5, C6, C7, C10, C17, C18, C20, C21, C22, C23, C24, C25, C26 +2 |
| 10 | 1u | Capacitor_SMD:C_0402_1005Metric | C3, C11, C12, C13, C14, C19, C27, C28, C29, C30 |
| 10 | 5.1k | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6, R7, R12, R13, R14, R15, R16 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R9, R17, R18 |
| 4 | 22p | Capacitor_SMD:C_0402_1005Metric | C15, C16, C31, C32 |
| 4 | 27 | Resistor_SMD:R_0402_1005Metric | R1, R2, R10, R11 |
| 4 | SW_Push | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | BOOT1, BOOT2, RESET1, RESET2 |
| 4 | TYPE-C-31-M-14 | mcu:HRO-TYPE-C-31-M-13 | J1, J2, J4, J5 |
| 3 | clipboard:f7853d81-d063-49a6-a7ac-4c26002f4210 | , , | |
| 2 | LOGO | LOGO | GEAR, GEAR |
| 2 | MF-MSMF050-2 | Fuse:Fuse_1812_4532Metric | F1, F2 |
| 2 | MX_SW_solder | PCM_marbastlib-mx:SW_MX_1.5u | MX22, MX42 |
| 2 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1, U5 |
| 2 | SRV05-4 | PCM_marbastlib-various:SOT-23-6-routable | U3, U7 |
| 2 | SWD | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3, J6 |
| 2 | W25Q128JVPIQ | mcu:SON127P610X510X80-8N430X340 | U9, U10 |
| 2 | W25Q128JVSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4, U8 |
| 2 | X322512MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2 |
| 2 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23-3 | U2, U6 |
| 2 | choc_SW_solder | PCM_marbastlib-choc:SW_choc_v1_1.5u | CH22, CH42 |
| 1 | PJ-342C_L | mcu:PJ-342C | J9 |
| 1 | PJ-342C_R | mcu:PJ-342C | J10 |
| 1 | oled_L | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | oled_R | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | pad_L | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J11 |
| 1 | pad_R | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J12 |
More from cosmosalad/GearSeries
4- 4 layers100.8 × 21.8 mm

- 2 layers132.6 × 112.1 mm

- 2 layers74.6 × 124.9 mm

- 2 layers56.4 × 75.4 mm

Similar boards
- 2 layers440.5 × 124.9 mm

Gear85 hotswap flex cut, number pad
cosmosalad/Gear80
Gear80 is a 80% keyboard based on the rp2040.
335 parts7MIT - 2 layers284.2 × 93.7 mm

Gear60 solder
cosmosalad/Gear60
Gear60 is a 60% multi-layout keyboard based on the rp2040.
198 parts4MIT - 2 layers209.6 × 66.7 mm

- 2 layers21.1 × 45.7 mm

RP2040-base example
TT-392/RP2040-base-example
Revision 0.9 was produced at jlcpcb. The rev number was bumped to 1.0 after the pcb was tested. There were no changes between rev 0.9 and 1.0.
34 parts - 2 layers

- 2 layers44 × 60 mm

Stefanhamminga stepperdrivermodulecarrier stepperdrivermodulecarrier
oomlout/oomlout_oomp_project_bot_v_2
113 parts - 2 layers346.1 × 93.7 mm

Sifrl main pcb
ramonimbao/SpaceInvadersFRL
An F-rowless TKL keyboard case, plate, and PCB that uses the HiTek Series 725 switches.
177 parts15 - 2 layers194.3 × 79 mm

Questions
How big is the Gear40 PCB?
It measures 269.9 × 93.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gear40 use?
217 parts, built around the RP2040, W25Q128JVPIQ, W25Q128JVSIQ and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gear40 KiCad files?
From the cosmosalad/GearSeries repository on GitHub, at the commit this page was made from: the board is Gear40/pcb/Gear40.kicad_pcb and its schematic Gear40/pcb/Gear40.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gear40 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cosmosalad before reusing the design.