ConDarth/modulinThis repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ModulinControl is an open-source printed circuit board by ConDarth, from the ConDarth/modulin repository on GitHub. It is a 2-layer board of 76.2 × 50.8 mm with 23 parts on 17 nets, routed with 110 tracks and 3 vias.
Its parts include 7 resistors, 5 capacitors, 2 connectors, 1 IC and 1 diode.
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin. This project is mostly based on a design Martin Molin of Wintergatan. An explanation of his design can be found here.
My goal in improving this design is to make it more accessible. His design uses 9 or so prebuilt modules meant for modular synthesizers, each of which costs in the range of 70$+ making the instrument quite expensive for a diy build. I took inspiration from the modular synth DIY community to instead try and build the necessary modules from scratch using only much cheaper standard electronics components. The components I am limiting myself to are resistors, capacitors, inductors/transformers, diodes, transistors (both BJT and FET), op amps and linear voltage regulators.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | User:R_10.16mm_CNC | R2, R4, R5, R6 |
| 2 | 100k | User:Potentiometer_Trim_CNC | RV1, RV2 |
| 2 | 100u | User:C_Radial_Polarized_P3.8mm_CNC | C1, C2 |
| 2 | 1u | User:C_Axial_P5.00mm_CNC | C3, C4 |
| 2 | 220k | User:R_10.16mm_CNC | R1, R7 |
| 1 | 10k | User:Potentiometer_Trim_CNC | RV3 |
| 1 | 1N4148 | User:D_P7.62mm_CNC | D1 |
| 1 | 1k | User:R_10.16mm_CNC | R3 |
| 1 | 47n | User:C_Axial_P5.00mm_CNC | C5 |
| 1 | Screw_Terminal_01x05 | User:TerminalBlock_1x5_CNC | J1 |
| 1 | Screw_Terminal_01x06 | User:TerminalBlock_1x6_CNC | J2 |
| 1 | TL074 | User:DIP-14_CNC | U1 |
The 19 most common of 23 parts.
It measures 76.2 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ConDarth/modulin repository on GitHub, at the commit this page was made from: the board is modulinControl/modulinControl.kicad_pcb and its schematic modulinAmplifier/modulinAmplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ConDarth before reusing the design.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com