ConDarth/modulinThis repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ModulinVCF is an open-source printed circuit board by ConDarth, from the ConDarth/modulin repository on GitHub. It is a 2-layer board of 50.8 × 177.8 mm with 74 parts on 49 nets, routed with 375 tracks and 24 vias.
It is built around the TL072, LM7805 and BC548. Its parts include 28 resistors, 18 capacitors, 12 transistors, 4 ICs and 1 connector.
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin. This project is mostly based on a design Martin Molin of Wintergatan. An explanation of his design can be found here.
My goal in improving this design is to make it more accessible. His design uses 9 or so prebuilt modules meant for modular synthesizers, each of which costs in the range of 70$+ making the instrument quite expensive for a diy build. I took inspiration from the modular synth DIY community to instead try and build the necessary modules from scratch using only much cheaper standard electronics components. The components I am limiting myself to are resistors, capacitors, inductors/transformers, diodes, transistors (both BJT and FET), op amps and linear voltage regulators.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | BC548 | User:TO-92_CNC | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 7 | 10u | User:C_Axial_P5.00mm_CNC | C3, C4, C13, C14, C15, C16, C17 |
| 5 | 100k | User:R_10.16mm_CNC | R1, R2, R3, R19, R27 |
| 4 | 47n | User:C_Axial_P5.00mm_CNC | C7, C8, C9, C10 |
| 3 | 10u | User:C_Rect_P5.00mm_CNC | C1, C2, C12 |
| 3 | 150 | User:R_7.62mm_CNC | R5, R9, R10 |
| 2 | 10k 1% | User:R_10.16mm_CNC | R20, R21 |
| 2 | 220n | User:C_Axial_P5.00mm_CNC | C6, C18 |
| 2 | B100k | User:Potentiometer_PanelMount_CNC | RV1, RV2 |
| 2 | TL074 | User:DIP-14_CNC | U1, U3 |
| 1 | 100p | User:C_Axial_P5.00mm_CNC | C5 |
| 1 | 10k | User:Potentiometer_Trim_CNC | RV5 |
| 1 | 10k | User:R_5.08mm_CNC | R18 |
| 1 | 10k | User:R_10.16mm_CNC | R26 |
| 1 | 10k | User:R_7.62mm_CNC | R8 |
| 1 | 150 | User:R_2.54mm_CNC | R13 |
| 1 | 1M | User:R_10.16mm_CNC | R7 |
| 1 | 1M 1% | User:R_2.54mm_CNC | R22 |
| 1 | 1M 1% | User:R_7.62mm_CNC | R23 |
| 1 | 1k | User:Potentiometer_Trim_CNC | RV4 |
| 1 | 1k | User:R_7.62mm_CNC | R15 |
| 1 | 220 | User:R_10.16mm_CNC | R16 |
| 1 | 220k | User:R_10.16mm_CNC | R24 |
| 1 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C11 |
| 1 | 22k | User:R_2.54mm_CNC | R17 |
| 1 | 2k | User:R_2.54mm_CNC | R4 |
| 1 | 330 | User:R_7.62mm_CNC | R14 |
| 1 | 330 | User:R_2.54mm_CNC | R11 |
| 1 | 47 | User:R_5.08mm_CNC | R6 |
| 1 | 470 | User:R_2.54mm_CNC_Alt | R12 |
| 1 | 47k | User:R_10.16mm_CNC | R25 |
| 1 | 5.1k | User:R_2.54mm_CNC | R28 |
| 1 | 500k | User:Potentiometer_Trim_CNC | RV6 |
| 1 | C100k | User:Potentiometer_PanelMount_CNC | RV3 |
| 1 | LM7805 | User:TO-220_CNC | U2 |
| 1 | Screw_Terminal_01x07 | User:TerminalBlock_1x7_CNC | J1 |
| 1 | TL072 | User:DIP-8_CNC | U4 |
The 69 most common of 74 parts.
It measures 50.8 × 177.8 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the TL072, LM7805 and BC548. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ConDarth/modulin repository on GitHub, at the commit this page was made from: the board is modulinVCF/modulinVCF.kicad_pcb and its schematic modulinAmplifier/modulinAmplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ConDarth before reusing the design.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
lmtreser/Proyectos-Educativos
Proyectos educativos diversos, generalmente con participación activa de alumnos
PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer
wntrblm/Big_Honking_Button
A simple Eurorack sampler and performance module in a silly package.
tomaskovacik/vwcdpic
This is my personal fork of k9spud vwcdpic project
