ConDarth/modulinThis repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ModulinAmplifier is an open-source printed circuit board by ConDarth, from the ConDarth/modulin repository on GitHub. It is a 2-layer board of 76.2 × 50.8 mm with 27 parts on 21 nets, routed with 109 tracks and 0 vias.
It is built around the LM386 and TL072. Its parts include 10 capacitors, 4 resistors, 3 connectors, 2 ICs and 2 diodes.
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin. This project is mostly based on a design Martin Molin of Wintergatan. An explanation of his design can be found here.
My goal in improving this design is to make it more accessible. His design uses 9 or so prebuilt modules meant for modular synthesizers, each of which costs in the range of 70$+ making the instrument quite expensive for a diy build. I took inspiration from the modular synth DIY community to instead try and build the necessary modules from scratch using only much cheaper standard electronics components. The components I am limiting myself to are resistors, capacitors, inductors/transformers, diodes, transistors (both BJT and FET), op amps and linear voltage regulators.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100u | User:C_Radial_Polarized_P3.8mm_CNC | C1, C2, C6 |
| 2 | 1N4148 | User:D_P7.62mm_CNC | D1, D2 |
| 2 | 1u | User:C_Axial_P5.00mm_CNC | C3, C4 |
| 1 | 10 | User:R_10.16mm_CNC | R4 |
| 1 | 100 | User:R_10.16mm_CNC | R2 |
| 1 | 100k | User:Potentiometer_Trim_CNC | RV2 |
| 1 | 100k | User:Potentiometer_PanelMount_CNC | RV1 |
| 1 | 100n | User:C_Axial_P5.00mm_CNC | C10 |
| 1 | 10k | User:R_7.62mm_CNC | R3 |
| 1 | 10u | User:C_Axial_P5.00mm_CNC | C5 |
| 1 | 1M | User:R_10.16mm_CNC | R1 |
| 1 | 220u | User:C_Radial_Polarized_P3.8mm_CNC | C9 |
| 1 | 33n | User:C_Axial_P5.00mm_CNC | C7 |
| 1 | 47n | User:C_Axial_P5.00mm_CNC | C8 |
| 1 | AudioJack3_SwitchTR | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J2 |
| 1 | LM386 | User:DIP-8_CNC | U2 |
| 1 | Screw_Terminal_01x02 | User:TerminalBlock_1x2_CNC | J3 |
| 1 | Screw_Terminal_01x04 | User:TerminalBlock_1x4_CNC | J1 |
| 1 | TL072 | User:DIP-8_CNC | U1 |
The 23 most common of 27 parts.
It measures 76.2 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the LM386 and TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ConDarth/modulin repository on GitHub, at the commit this page was made from: the board is modulinAmplifier/modulinAmplifier.kicad_pcb and its schematic modulinAmplifier/modulinAmplifier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ConDarth before reusing the design.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ConDarth/modulin
This repository holds all data for th modulin I am building. The concept behind this design is to make a fully analog synthesizer using only standard components, with a fun control system based on a violin.
ryomuk/tangnano20k-vectrex
Tang Nano 20K top level module for Dar's Vectrex
Fihdi/ATS-20-Eurorack
A clone of the ATS 20 from PU2CLR in Eurorack Format (3U height). The circuit contains jumpers to switch between standalone mode and Eurorack.
SamyIOoOI/RetroCom
A 4-Station one-to-one two-way INTERCOM built around the AT89C52-PI24 RetroMCU (8051 Core).
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
