Skip to the content
2 layers138.8 × 89.8 mmKeyboard pcb, the printed circuit board in 3D

Keyboard pcb

diepala/cantor756

Cantor keyboard, a 42 key diodeless split keyboard.

Size
138.8 × 89.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
38
Pads
260
Tracks, vias
431, 9
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
26 Jan 2022
Updated
24 Nov 2024

Overview

Keyboard pcb is an open-source printed circuit board by diepala, from the diepala/cantor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 138.8 × 89.8 mm with 23 parts on 38 nets, routed with 431 tracks and 9 vias.

Its parts include 21 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards of this library.

README

README.md

Cantor Keyboard

The Cantor keyboard is a 42 key diodeless split keyboard, designed with simplicity in mind. It is inspired on the popular corne, ferris and sweep keyboards, aiming to provide a more ergonomic (stronger column stagger) corne-like layout with a simple, easy to assemble and cheap design.

Cantor Keyboard

There are two versions of the Cantor:

The Cantor Classic uses choc switches with choc spacing. Therefore, only MBK keycaps can be used.

The Cantor MX uses either choc V1, choc V2, or MX switches with the slightly larger MX spacing. Keycaps for MX stems can be used. (OEM/SA/XDM/Cherry, etc.)

Cantor Keyboard

Why diodeless?

A diodeless design reduces the keyboard assembly time, as the amount of components to solder is significantly reduced. Moreover, soldering diodes can cause trouble during the keyboard build. Diodes need to be placed in the correct direction, if not, the keys won't work well! Eliminating diodes will prevent many errors during the assembly process.

Disclaimers

All the designs and files are provided "AS IS" without any warranty or support.

Design philosophy

The Cantor is designed with the following goals:

  • Comfort
  • Powerful
  • Low cost
  • Simplicity
  • Ease of build
  • USB-C
  • No diodes

The PCB is reversible to reduce manufacturing costs.

Getting started

Would you like to build this keyboard? Then continue reading!

You can also buy a kit to build the Cantor keyboard from one of the honorable sponsors:





Bill of Materials

To build the keyboard, you will need the following materials:

Cantor Classic:
  • 2x PCB boards (both are equal since they are reversible)
  • 2x STM32F401CC blackpill microcontrollers (they are cheap on aliexpress)
  • Pins and sockets for the microcontrollers (blackpill needs 20 pin stripes)
  • 42 Choc v1 switches
  • 42 MBK keycaps
  • Some little rubber feet/bumpers (recommended 6 mm of diameter)
  • 2x TRRS jacks (PJ-320A)
  • 1x TRRS cable
  • 1x USB cable compatible with your computer and the blackpill
Cantor MX
  • Same as the classic, but switches can be choc v1, choc v2, MX 5 pin, or MX 3pin, and the compatible keycaps for chosen switches. MX 5 pin are preferable to 3 pin because they have more points of contact with the PCB.

  • Cantor MX has slots for optional 'Tenting pucks'. They can be purchased or 3d printed.

Order the PCB

Download the gerber file from releases, and submit it to your favorite PCB manufacturer. The keyboard designs have been tested with JLCPCB. More details on the ordering process can be found in the PCB Ordering Guide.

Note: if you don't want a random tracking number to be printed in the PCB, make sure to select the option 'Remove Order Number' in JLCPCB.

How to Build

To build the keyboard, you'll also need a soldering iron and some tin. Follow the build guide.

Firmware

The Cantor keyboard uses the QMK firmware, which already supports this keyboard.

To flash the firmware to the microcontroller connect the blackpill to your computer and set it to bootloader mode. To do this the first time:

  1. Press and hold the BOOT0 button.
  2. Press and release the NRST button.
  3. Release the BOOT0 button.

The following times you want to flash the keyboard, it is much simpler thanks to bootmagic. Hold the top left key of the keyboard and plug the microcontroller. If flashing the right part, hold the top right key.

Feedback

If you have build this keyboard, please fill this form to provide feedback. This will help to improve the keyboard design in future revisions.

Also, you can open an issue reporting any problem or feature request.

Support

The development of a keyboard takes time and money. If you like this keyboard a want to support me for the work and to develop future revisions of the keyboard, consider donating:

PayPal: paypal GitHub: Here

Honorable sponsors

Thank you very much to everyone contributing and/or sponsoring this project. Special thanks to the honorable sponsors:

Parts

23
QtyValueFootprintReferences
21KEYSWkeyswitches:SW_PG1350_reversibleK00, K01, K02, K03, K04, K05, K10, K11, K12, K13, K14, K15, K20, K21, K22, K23 +5
1TRRSKeebio-Parts:TRRS-PJ-320AJ1
1YAAJ_WeAct_BlackPill_Part_LikeFootprints:YAAJ_WeAct_BlackPill_2U1

More from diepala/cantor

1
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0

Similar boards

  • 2 layers65 × 56 mmPi servo hat, the printed circuit board in 3D

    Pi servo hat

    earthtojake/text-to-cad

    Design physical products with AI

    23 parts26kMIT
  • 2 layers14 × 100 mmYunomi, the printed circuit board in 3D

    Yunomi

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    23 parts3kApache-2.0
  • 2 layers50.8 × 52.2 mmFuhhni, the printed circuit board in 3D

    Fuhhni

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    23 parts915
  • 2 layers32.9 × 53.3 mmGoatgdo, the printed circuit board in 3D

    Goatgdo

    Kaldek/rat-ratgdo

    Open source schematics for ratgdo PCB

    23 parts511MIT
  • 2 layers35.5 × 50 mmTobo, the printed circuit board in 3D

    Tobo

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    23 parts463
  • 2 layers19 × 19 mmKeybit, the printed circuit board in 3D

    Keybit

    notaroomba/keybytes

    A truly modular keyboard

    23 parts444
  • 2 layers88.5 × 28 mmExpBreakout, the printed circuit board in 3D

    ExpBreakout

    Duet3D/Duet-2-Hardware

    The KiCAD source for the Duet 3d printer controller see www.duet3d.com

    23 parts258
  • 2 layers23 × 24.5 mm500 breakout, the printed circuit board in 3D

    500 breakout

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    23 parts253GPL-3.0

Questions

How big is the Keyboard pcb PCB?

It measures 138.8 × 89.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboard pcb use?

23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard pcb KiCad files?

From the diepala/cantor repository on GitHub, at the commit this page was made from: the board is Cantor_Classic/keyboard_pcb.kicad_pcb and its schematic Cantor_Classic/keyboard_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard pcb design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).