2 layers100 × 60 mm
Arduino nano reflow TRIAC v1 0
hecko/nanoReflowController
(c) 2017 David Sanz Kirbis (c) 2014 Karl Pitrich in part based on a project (c) 2013 Ed Simmons
34 parts
2 layers73.7 × 61 mm
ReflowControllerREV1
computingthebishop/ReflowOven13- Size
- 73.7 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 50
- Pads
- 127
- Tracks, vias
- 289, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 May 2019
- Updated
- 3 Aug 2020
Overview
ReflowControllerREV1 is an open-source printed circuit board by computingthebishop, from the computingthebishop/ReflowOven repository on GitHub, published under the MIT licence. It is a 2-layer board of 73.7 × 61 mm with 30 parts on 50 nets, routed with 289 tracks and 16 vias.
It is built around the BT137, MAX6675ISA+ and H11AA1-X007T, with the MOC3020 and IRF540N among its other parts. Its parts include 11 resistors, 7 connectors, 4 capacitors, 3 ICs and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
BT137
TO-252Thyristors (SCR)/ModulesJUXING
MAX6675ISA+
SOIC-8-20℃~+85℃ 3V~5.5V SPI SOIC-8 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - Specialized
H11AA1-X007T
SMD-6P-55℃~+100℃ 1 1.2V 20% 30V 4.42kV 400mV@0.5mA,10mA 60mA AC,DC Integrated anti-parallel LED Phototransistor SMD-6P Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output Optoisolators
MOC3020
DIP-6-40℃~+100℃ 1 1.5V 1000V/us 400V 50mA 5kV TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSLite-OnTriac, SCR Output Optoisolators
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R10, R12, R14, R16 |
| 2 | 4,7u | Capacitor_SMD:C_Elec_4x5.8 | C1, C5 |
| 2 | 47K 0.6W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 2.4k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | AC_CONN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | BT137 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | Q2 |
| 1 | Buzzer | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BZ1 |
| 1 | CONN_AC_to_12v400mA | CTB_Logo:12v220 | J5 |
| 1 | ENCODER_CONN | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Horizontal | J6 |
| 1 | Fan_CONN | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | H11AA1-X007T | Package_DIP:DIP-6_W7.62mm_LongPads | U1 |
| 1 | HEATER_CONN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | IRF540N | Package_TO_SOT_SMD:TO-263-3_TabPin4 | Q1 |
| 1 | MAX6675ISA+ | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2 |
| 1 | MOC3020 | Package_DIP:DIP-6_W7.62mm | IC1 |
| 1 | TFT_CONN | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Horizontal | J7 |
| 1 | Thermocouple_CONN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
Questions
How big is the ReflowControllerREV1 PCB?
It measures 73.7 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ReflowControllerREV1 use?
30 parts, built around the BT137, MAX6675ISA+, H11AA1-X007T and MOC3020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ReflowControllerREV1 KiCad files?
From the computingthebishop/ReflowOven repository on GitHub, at the commit this page was made from: the board is PCB/ReflowControllerREV1/ReflowControllerREV1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ReflowControllerREV1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers176 × 100 mm
SmartDesk v1p0
daverowntree/SmartDesk
I open sourced a design I made a few years back for a non-paying client. Use it as you see fit!
190 parts - 2 layers96.3 × 98 mm
Aquarium
baranovskiykonstantin/aquarium
Control the lighting and the heating of the aquarium.
73 parts11 - 2 layers50.8 × 50.8 mm
- 2 layers95.9 × 129.5 mm
Solderin Station
kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included
73 parts3GPL-2.0 - 2 layers100 × 70 mm
- 2 layers50 × 100 mm
Dimmer final
MateoCignetti/ProyectoFinal
Esta obra está bajo una [Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional][cc-by-nc-sa].
32 parts2 - 2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36