2 layers73.7 × 61 mm
BT137
JUXINGExtended
- Part id
- juxing/BT137
- Category
- Thyristors (SCR), Modules
- Package
- TO-252
- Pins
- 3
- In stock
- 316 at JLCPCB (C22440667)
- Used on
- 10 open-source boards
Overview
The BT137 is a thyristors (SCR), Module made by JUXING in a TO-252 package with 3 pins.
PCBKit's library has its footprint (EasyEDA_Cloud:TO-252-2_L6.6-W6.1-P4.57-LS9.9-BR-CW, from EasyEDA), ready for a KiCad board. 316 are in stock at JLCPCB (part C22440667). 10 open-source boards in 7 repositories on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
- 2 layers96.3 × 98 mm
Aquarium
baranovskiykonstantin/aquarium
Control the lighting and the heating of the aquarium.
73 parts11 - 2 layers50.8 × 50.8 mm
- 2 layers95.9 × 129.5 mm
Solderin Station
kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included
73 parts3GPL-2.0 - 2 layers100 × 70 mm
- 2 layers100 × 60 mm
Arduino nano reflow TRIAC v1 0
hecko/nanoReflowController
(c) 2017 David Sanz Kirbis (c) 2014 Karl Pitrich in part based on a project (c) 2013 Ed Simmons
34 parts - 2 layers50 × 100 mm
Dimmer final
MateoCignetti/ProyectoFinal
Esta obra está bajo una [Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional][cc-by-nc-sa].
32 parts2 - 2 layers50 × 100 mm
Dimmer final alt
MateoCignetti/ProyectoFinal
Esta obra está bajo una [Licencia Creative Commons Atribución-NoComercial-CompartirIgual 4.0 Internacional][cc-by-nc-sa].
32 parts2
Parts like it
8
BT136S-600D
TO-252Thyristors (SCR)/ModulesGOODWORKBT136S-600E
TO-252-40℃~+125℃ 1.5V 1.5W 1.7V 10mA 10mA 30A@60Hz 4A 600V TO-252 Thyristors (SCR)/Modules ROHSMinosThyristors (SCR)/ModulesBTA204S-600B,118
TO-252(DPAK)1.7V 1V 27A 30mA 4A 500mW 50mA 600V TO-252(DPAK) Thyristors (SCR)/Modules ROHSWeEn SemiconductorsThyristors (SCR)/ModulesBT137S-600E(KTP)
TO-252-40℃~+125℃ 1 TRIAC 1.5V 10mA 1V 20mA 500mW 600V 65A@20ms 8A TO-252 Thyristors (SCR)/Modules ROHSKTPThyristors (SCR)/ModulesBT134S-600E
TO-252-40℃~+125℃ 1 TRIAC 1.5V 1.7V 27A 4A 500mW 600V TO-252 Thyristors (SCR)/Modules ROHSKYThyristors (SCR)/ModulesBT138S-800E
TO-252-40℃~+125℃ 1 TRIAC 1.55V 1.5V 120A 12A 1W 60mA 800V TO-252 Thyristors (SCR)/Modules ROHSKYThyristors (SCR)/ModulesT435-600B-TR
TO-252(DPAK)-40℃~+125℃ 1 TRIAC 1.3V 1.56V 1W 30A@60Hz 35mA 35mA 4A 600V TO-252(DPAK) Thyristors (SCR)/Modules ROHSSTMicroelectronicsThyristors (SCR)/ModulesTN815-600B-TR
TO-252(DPAK)-40℃~+125℃ 1 SCR 1.3V 1.6V 15mA 1W 25mA 600V 8A 95A TO-252(DPAK) Thyristors (SCR)/Modules ROHSSTMicroelectronicsThyristors (SCR)/Modules
Questions
Is there a KiCad symbol and footprint for the BT137?
Yes. the footprint EasyEDA_Cloud:TO-252-2_L6.6-W6.1-P4.57-LS9.9-BR-CW, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the BT137?
TO-252, with 3 pins. Its footprint is drawn on this page.
Where is the BT137 datasheet?
JUXING publishes it: the Datasheet link on this page opens it.
Where can I order the BT137?
JLCPCB lists it as part C22440667, with 316 in stock; the sellers' links on this page open their listings.
What can replace the BT137?
Parts like it in the library: the BT136S-600D by GOODWORK, the BT136S-600E by Minos, the BTA204S-600B,118 by WeEn Semiconductors and the BT137S-600E(KTP) by KTP. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the BT137?
10 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.