
ATtinyDemoBoard
CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

A group of educational projects to promote hardware and software development.
ATtiny20SIOC is an open-source printed circuit board by CmdrZin, from the CmdrZin/Educational-Projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.6 × 26.7 mm with 3 parts on 20 nets, routed with 77 tracks and 2 vias.
It is built around the ATTINY1616-SN. Its parts include 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A group of educational projects to promote hardware and software development. Zip files of projects can be found at https://www.gameactive.org/dist/
==================
Educational projects
| Name | Description |
|---|---|
| IntroToArduino | An Educational package on how to program using the Arduino IDE. |
| Beyond Arduino | A guide to learning the AVR series of microcontrollers. |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
| 1 | ATtiny1616-S | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1 |

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/chips_avr_examples
AVR assembly and C code for robotics and other projects.


fjalvingh/8bit-busdisplay
PCB for showing an 8 bit hex number from a 5V bus on a 7-segment display using an ATTINY1616

Bumb1eris/PCB_Business_Card
A coin cell powered PCB business card that can play snake



empdo/lightmeter
An open-hardware handheld photographic light meter. Set shutter speed and ISO on two dials, press the button, and one of nine LEDs lights up to show the aperture you should use. Runs from a single CR2032.

It measures 21.6 × 26.7 mm and has 2 copper layers, 1.6 mm thick.
3 parts, built around the ATTINY1616-SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CmdrZin/Educational-Projects repository on GitHub, at the commit this page was made from: the board is BeyondArduino/KiCad/ATtiny20SIOC/ATtiny20SIOC.kicad_pcb and its schematic BeyondArduino/KiCad/ATtiny14SIOC/ATtiny14SIOC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).