4 layers100 × 100 mm
4 layers48 × 47.7 mm
Basic v1
Churrosoft/OpenEFI-PCB_next1- Size
- 48 × 47.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 64
- Pads
- 225
- Tracks, vias
- 278, 49
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Jan 2023
- Updated
- 2 Feb 2023
Overview
Basic v1 is an open-source printed circuit board by Churrosoft, from the Churrosoft/OpenEFI-PCB_next repository on GitHub, published under the MIT licence. It is a 4-layer board of 48 × 47.7 mm with 69 parts on 64 nets, routed with 278 tracks and 49 vias.
It is built around the ISL9V5045S3ST, ZXGD3006E6 and ZXGD3009E6TA, with the BAS19 among its other parts. Its parts include 24 resistors, 12 diodes, 8 ICs, 8 transistors and 4 connectors.
Main components
4
ISL9V5045S3ST
TO-263AB-40℃~+175℃@(Tj) 1.25V 1.3V 10.8us 300W 32nC@5V 480V 51A 700ns TO-263AB IGBT Transistors / Modules ROHSonsemiIGBT Transistors / Modules
ZXGD3006E6
SOT23-640V, 10A, Gate Driver for Switching IGBTs and SiC MOSFETsDiodes IncorporatedUncategorisedZXGD3009E6TA
SOT-26-55℃~+150℃ 1 20nA 210ns 240ns 2A 2A 40V Interleaved conduction protection Low Side MOSFET SOT-26 Gate Drivers ROHSDiodes IncorporatedGate Drivers
BAS19
SOT-231 Independent 1.25V@200mA 100V 100nA@100V 200mA 250mW SOT-23 Switching Diodes ROHSCBISwitching Diodes
README
README.mdOpenEFI-PCB_next
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100k 1/10W +-1% | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R8, R11, R12, R14, R16 |
| 8 | 22R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R7, R9, R10, R13, R15 |
| 8 | 680R | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R20, R21, R22, R23, R24 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D1, D3, D5, D7, D9, D11, D13, D15 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 4 | BAS19 | Package_TO_SOT_SMD:SOT-23 | D2, D4, D6, D8 |
| 4 | ISL9V5045S3ST | Package_TO_SOT_SMD:TO-263-2 | Q3, Q4, Q7, Q8 |
| 4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5 |
| 4 | VNN7NV04 | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2, Q5, Q6 |
| 4 | ZXGD3006E6 | Package_TO_SOT_SMD:SOT-23-6 | U3, U4, U7, U8 |
| 4 | ZXGD3009E6 | Package_TO_SOT_SMD:SOT-23-6 | U1, U2, U5, U6 |
| 2 | Conn_01x08_Male | Connector_PinHeader_1.00mm:PinHeader_1x08_P1.00mm_Vertical | J4, J5 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | OUTPUT | OpenEFI-STM32F_rev3:hipower_8pin | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Dinkle:TerminalBlock_Dinkle_DT-55-B01X-02_P10.00mm | J1 |
Questions
How big is the Basic v1 PCB?
It measures 48 × 47.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Basic v1 use?
69 parts, built around the ISL9V5045S3ST, ZXGD3006E6, ZXGD3009E6TA and BAS19. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Basic v1 KiCad files?
From the Churrosoft/OpenEFI-PCB_next repository on GitHub, at the commit this page was made from: the board is pmic/basic_v1/basic_v1.kicad_pcb and its schematic mainboard_uEFI/connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Basic v1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Churrosoft/OpenEFI-PCB_next
3- 4 layers35 × 32.7 mm
- 4 layers48 × 51.9 mm
Similar boards
- 4 layers99.9 × 123 mm
UEFI rev3
Churrosoft/kibot_test
export KICAD63DMODELDIR="/usr/share/kicad/3dmodels/" export KICAD6FOOTPRINTDIR="/usr/share/kicad/footprints/" export KICAD6SYMBOLDIR="/usr/share/kicad/symbols/" export KICAD6TEMPLATEDIR="/usr/share/kicad/template/"
260 parts - 4 layers99.9 × 99.3 mm
ΜEFI rev2
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
169 parts8CERN-OHL-S-2.0 - 2 layers58.4 × 66.7 mm
PWM10
Duckle29/PWM-Solar-Charge-Controller
A PWM Solar Charge controller based on Julian Lietts PWM5
55 parts9MIT - 2 layers77 × 73.5 mm
EChook Nano
eChook/eChook-Nano-PCB
Designspark Schematics and PCB files, and PCB Gerber Files
141 parts2 - 4 layers220 × 130 mm
Gantry controller prototype DUE
kitspace-forks/growbox-open-motion-mobo
A general purpose open source Arduino DUE based motion controller designed to run the Synthetos G2 motion control fimware
138 parts - 4 layers240 × 100 mm
- 2 layers72 × 47 mm
- 4 layers60 × 60 mm
CLAS Combo Breakout
takuhoTech/CelestNavi-Combo
Ready-to-use GNSS+CLAS receiver with integrated loop antenna
87 parts9MIT