4 layers99 × 113 mm
UEFI rev3
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
267 parts8CERN-OHL-S-2.0
4 layers99.9 × 123 mm
UEFI rev3
Churrosoft/kibot_testexport KICAD63DMODELDIR="/usr/share/kicad/3dmodels/" export KICAD6FOOTPRINTDIR="/usr/share/kicad/footprints/" export KICAD6SYMBOLDIR="/usr/share/kicad/symbols/" export KICAD6TEMPLATEDIR="/usr/share/kicad/template/"
- Size
- 99.9 × 123 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 260
- Nets
- 231
- Pads
- 878
- Tracks, vias
- 2,258, 299
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Mar 2022
- Updated
- 29 Mar 2022
Overview
UEFI rev3 is an open-source printed circuit board by Churrosoft, from the Churrosoft/kibot_test repository on GitHub. It is a 4-layer board of 99.9 × 123 mm with 260 parts on 231 nets, routed with 2,258 tracks and 299 vias.
It is built around the ISL9V5045S3ST, LM321 and MAX9926UAEE+, with the MCP3208-BI/P, MCZ33810EK and TXS0102DCU among its other parts. Its parts include 78 resistors, 48 capacitors, 29 diodes, 17 ICs and 14 fuses. It belongs with the STM32 boards of this library.
Main components
12
ISL9V5045S3ST
TO-263AB-40℃~+175℃@(Tj) 1.25V 1.3V 10.8us 300W 32nC@5V 480V 51A 700ns TO-263AB IGBT Transistors / Modules ROHSonsemiIGBT Transistors / Modules
LM321
SOT-23-50℃~+70℃ 1 2mV 3nA 400V/ms 40mA 430uA 45nA 90dB SOT-23-5 Operational Amplifier ROHSPJSEMIOperational Amplifier
MAX9926UAEE+
SSOP-16-150mil-40℃~+125℃ 2 4.5V~5.5V 4.7mA Angle-to-digital converter Programmable gain、Differential output SSOP-16-150mil ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)ADCs/DACs - Special Purpose
MCP3208-BI/P
PDIP-16-40℃~+85℃ 0.5LSB 100kHz 12 1LSB 1MHz、2MHz 2.7V~5.5V 500nA 8 External External Multiplexers、Bipolar input Not supported SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
MCZ33810EK
SSOP-32-EP-300mil-40℃~+125℃ 10uA 200ns 200ns 4 6V~32V IGBT、MOSFET Low Side Under Voltage Protection、Over Voltage Protection、Overtemperature protection (OTP) SSOP-32-EP-300mil Relay / Coil Drivers ROHSNXP SemiconductorsPower Management - Specialized
TXS0102DCU
TSSOP82-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull ApplicationsTexas InstrumentsUncategorised
AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorised
MIC2940A-3.3WU
TO-263-3-40℃~+125℃@(Tj) 1 1.25A 240uA 26V 3.3V 400uVrms 600mV@(1.25A) Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection Positive TO-263-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MIC2940A-5.0WT
TO-220-3-40℃~+125℃ 1 1.25A 26V 400uVrms 500uA 5V 600mV@(1.25A) Fixed Over Current Protection、Over Temperature Protection Positive TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
K26
SOD-123FL-65℃~+150℃ 100uA 2A 50A 60V 700mV@2A Independent SOD-123FL Schottky Diodes ROHSGOODWORKSchottky Diodes
SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
README
README.mdkibot_test
export KICAD6_3DMODEL_DIR="/usr/share/kicad/3dmodels/" export KICAD6_FOOTPRINT_DIR="/usr/share/kicad/footprints/" export KICAD6_SYMBOL_DIR="/usr/share/kicad/symbols/" export KICAD6_TEMPLATE_DIR="/usr/share/kicad/template/"
KICAD_USER_TEMPLATE_DIR /home/fdsoftware/.local/share/kicad/6.0/template/
KICAD6_3RD_PARTY /home/fdsoftware/.local/share/kicad/6.0/3rdparty
Parts
260| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3, TP4, TP5, TP6, TP7, TP20, TP21, TP22, TP23, TP24, TP25, TP26, TP27, TP28, TP29, TP30 +2 |
| 16 | K26 | Diode_SMD:D_SOD-123F | D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30 |
| 14 | 750mA | Fuse:Fuse_0805_2012Metric | F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14 |
| 10 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5, C9, C10, C11, C12, C13, C14, C15, C17, C39 |
| 10 | 4.99K 1/2W | Resistor_SMD:R_1210_3225Metric | R81, R112, R113, R114, R115, R116, R117, R118, R119, R120 |
| 10 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5, JP6, JP7, JP8, JP9, JP10, JP12, JP15, JP17, JP18 |
| 9 | 4.7k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R24, R25, R26, R27, R29, R30 |
| 9 | LED | LED_SMD:LED_0603_1608Metric | D1, D5, D6, D7, D8, D9, D10, D12, D13 |
| 8 | 10nF | Capacitor_SMD:C_0603_1608Metric | C23, C24, C25, C26, C27, C28, C29, C30 |
| 8 | 240pF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C32, C35, C37, C38, C49, C51 |
| 7 | 2.2k | Resistor_SMD:R_0603_1608Metric | R38, R39, R44, R45, R51, R52, R97 |
| 7 | 28.6k +-1% | Resistor_SMD:R_0603_1608Metric | R36, R37, R42, R43, R49, R50, R92 |
| 7 | 3.32k +-1% | Resistor_SMD:R_0603_1608Metric | R40, R41, R47, R48, R53, R54, R87 |
| 6 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C52, C53, C54, C55, C56, C57 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R55, R58, R59, R108, R109 |
| 5 | 10pF | Capacitor_SMD:C_0603_1608Metric | C18, C19, C20, C21, C22 |
| 5 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4, H9 |
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP23, JP24 |
| 4 | 36K | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16 |
| 4 | 4.02k | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 4 | ISL9V5045S3ST | Package_TO_SOT_SMD:TO-263-2 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole | TestPoint:TestPoint_Pad_D1.0mm | H5, H6, H7, H8 |
| 4 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q5, Q8, Q9, Q11 |
| 3 | 10R 1/10W | Resistor_SMD:R_0603_1608Metric | R18, R20, R33 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R31, R32, R34 |
| 3 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q6, Q7, Q10 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 15pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 1N4148 | Diode_SMD:D_SOD-523 | D2, D3 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C16, C40 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q12, Q13 |
| 2 | LM321 | Package_TO_SOT_SMD:SOT-23-5 | U27, U31 |
| 2 | R_Small | Resistor_SMD:R_0603_1608Metric | R121, R122 |
| 2 | R_Small | Resistor_SMD:R_1206_3216Metric | R1, R28 |
| 2 | TPL7407LAPWR | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U20, U22 |
| 2 | TXS0102DCU | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U10, U11 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP18, TP19 |
| 2 | nya_a | lethalbit-graphics:nya_a | G***, G*** |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R46 |
| 1 | 0.01R | Resistor_SMD:R_1210_3225Metric | R21 |
| 1 | 0.02R | Resistor_SMD:R_2512_6332Metric | R8 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C36 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 100k 1/10W +-1% | Resistor_SMD:R_0603_1608Metric | R82 |
| 1 | 100uF ±20% 35V | Capacitor_SMD:CP_Elec_6.3x7.7 | C31 |
| 1 | 10K 1/10W | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 1M 1/10W | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 20k 1/10W +-1% | Resistor_SMD:R_0603_1608Metric | R83 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R57 |
| 1 | 25LCxxx | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | U7 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 36638-0002 | OpenEFI-STM32F_rev3:366380002 | J3 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C34 |
| 1 | 4.99K 1/10W | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C33 |
| 1 | 57.6K 1/10W | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 750 | Resistor_SMD:R_0603_1608Metric | R56 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U9 |
| 1 | BOOT0 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | BOOT1 | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x08_P1.27mm_Vertical | J4 |
| 1 | Jumper_NO_Small | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | LM4040DBZ-5 | Package_TO_SOT_SMD:SOT-23 | U8 |
| 1 | LT4363IMS | Package_SO:MSOP-12_3x4mm_P0.65mm | U6 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Logo2_14.6x12mm_SilkScreen | LOGO1 |
| 1 | MAX9926UAEE+ | OpenEFI-STM32F_rev3:SOP63P602X175-16N | U36 |
| 1 | MCP3208 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | MCZ33810EK | OpenEFI-STM32F_rev3:SOP65P1030X245-33N | U1 |
| 1 | MIC2940A-3.3WU | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U4 |
| 1 | MIC2940A-5.0WT | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | MM3Z24VT1G | Diode_SMD:D_SOD-323 | D11 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H10 |
| 1 | PaP_Driver_v1 | OpenEFI-STM32F_rev3:DIP-16_598_ELL | U23 |
| 1 | SMAJ58CA | Diode_SMD:D_SMA | D4 |
| 1 | STM32F407VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | SYM_Hot_Large | OpenEFI-STM32F_rev3:churro_new_v4 | Churrosoft |
The 256 most common of 260 parts.
Questions
How big is the UEFI rev3 PCB?
It measures 99.9 × 123 mm and has 4 copper layers, 1.6 mm thick.
What parts does the UEFI rev3 use?
260 parts, built around the ISL9V5045S3ST, LM321, MAX9926UAEE+ and MCP3208-BI/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UEFI rev3 KiCad files?
From the Churrosoft/kibot_test repository on GitHub, at the commit this page was made from: the board is uEFI_rev3/uEFI_rev3.kicad_pcb and its schematic uEFI_rev3/Drivers.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UEFI rev3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Churrosoft before reusing the design.
Similar boards
- 4 layers100 × 100 mm
- 2 layers265.5 × 132.3 mm
Dashdash
Churrosoft/Dashdash
tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre
272 parts1MIT - 4 layers116.5 × 98 mm
Hw v1
Churrosoft/uEFI-v6.x
Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC
248 parts2 - 2 layers50 × 50 mm
- 2 layers78 × 50 mm
- 4 layers44.8 × 12.5 mm
Hellen1-mcz33810
andreika-git/hellen-one
Hellen-One Hardware Platform for rusEFI Engine Management System
32 parts38 - 2 layers37 × 51 mm
ElectretXLRMic
MHeis22/P48ElectretMicPCB
Phantom powered OPA Alice / https://www.ti.com/lit/an/sboa320a/sboa320a.pdf?ts=1773332275188 resembling Electret mic Impedance Converter with balanced out.
38 parts