
TXS0102DCU
Texas Instruments
2-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull Applications
- Part id
- ti/TXS0102DCU
- Category
- Uncategorised
- Package
- TSSOP8
- Pins
- 8
- Used on
- 42 open-source boards
Overview
The TXS0102DCU is an uncategorised made by Texas Instruments in a TSSOP8 package with 8 pins. 2-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull Applications.
PCBKit's library has its KiCad symbol (Logic_LevelTranslator:TXS0102DCU, from KiCad's library) and its footprint (Package_SO:VSSOP-8_2.3x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 42 open-source boards in 34 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | B2 | Input/output |
| 2 | GND | Power in |
| 3 | VCCA | Power in |
| 4 | A2 | Input/output |
| 5 | A1 | Input/output |
| 6 | OE | Input |
| 7 | VCCB | Power in |
| 8 | B1 | Input/output |
- 6 layers190 × 140 mm

- 4 layers69.8 × 16.4 mm

- 2 layers49.3 × 30.5 mm

WLED All in one ESP32 Controller
Hasenpups/WLED_All-in-one_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
23 parts19 - 2 layers27.4 × 58.7 mm

Lc29h mikrobus PCB
i2hm/micro_climate_station
Open the KiCad project using KiCad 7 and above.
48 parts3 - 10 layers130.9 × 63.9 mm

- 2 layers118 × 67 mm

Coloryr
Coloryr/ColorAudio
通用耳放,目前支持: - 音乐播放 - MP3音频解码,信息显示 - FLAC音频解码,信息显示 - 蓝牙音频播放 - SBC编码 - AAC编码 - aptx编码(freeaptx解码库) - USB音频播放 - UAC1 (最大96K 32bit,只能设置一种采样大小) - UAV2 (最大192K 32bit,支持多种采样大小)
241 parts2GPL-3.0 - 2 layers90 × 90 mm

PocketPSU elec main
jarrod89/pocketPSU
Input1: - Output1 can be used to supply pocketPSU via a battery - Optional battery charging capability (addon board with BMS)
97 parts2 - 4 layers19.8 × 50.9 mm

Zigbee air quality monitor
nobodyguy/zigbee_air_quality_monitor_hardware
Opensource HA compatible air quality monitor with CO2, temperature and humidity measurements
35 parts2Apache-2.0
Parts like it
8SN74LVC1G123DCU
TSSOP8Single Retriggerable Monostable Multivibrator with Schmitt-Trigger InputTexas InstrumentsUncategorisedLSF0102DCU
TSSOP82 Channel Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull ApplicationTexas InstrumentsUncategorisedPCA9306DCU
TSSOP8Dual Bidirectional I2C Bus and SMBus Voltage-Level TranslatorTexas InstrumentsUncategorisedSN74AUP2G80DCU
TSSOP8Low-Power Dual Positive-Edge-Triggered D-Type Flip-FlopTexas InstrumentsUncategorisedSN74AXCH2T45DCU
TSSOP82-Bit Dual-Supply Bus Transceiver with Configurable Level-Shifting and Bus-Hold InputsTexas InstrumentsUncategorisedSN74LVC2G80DCU
TSSOP8Dual Positive-Edge-Triggered D-Type Flip-FlopTexas InstrumentsUncategorisedTCA9406DCU
TSSOP82-Bit Bidirectional 1-MHz, I2C Bus and SMBus Voltage-Level Translator with 8-kV HBM ESDTexas InstrumentsUncategorisedSN74LVC2G02DCU
TSSOP8Dual 2-Input Positive-NOR GateTexas InstrumentsUncategorised
Questions
Is there a KiCad symbol and footprint for the TXS0102DCU?
Yes. The symbol is Logic_LevelTranslator:TXS0102DCU and the footprint Package_SO:VSSOP-8_2.3x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TXS0102DCU?
TSSOP8, with 8 pins. Its footprint is drawn on this page.
What can replace the TXS0102DCU?
Parts like it in the library: the SN74LVC1G123DCU by Texas Instruments, the LSF0102DCU by Texas Instruments, the PCA9306DCU by Texas Instruments and the SN74AUP2G80DCU by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TXS0102DCU?
42 boards in 34 repositories on GitHub; the most starred are listed on this page, with their KiCad files.