
PCA9306DCU
Texas Instruments
Dual Bidirectional I2C Bus and SMBus Voltage-Level Translator
- Part id
- ti/PCA9306DCU
- Category
- Uncategorised
- Package
- TSSOP8
- Pins
- 8
- Used on
- 2 open-source boards
Overview
The PCA9306DCU is an uncategorised made by Texas Instruments in a TSSOP8 package with 8 pins. Dual Bidirectional I2C Bus and SMBus Voltage-Level Translator.
PCBKit's library has its KiCad symbol (Interface:PCA9306, from KiCad's library) and its footprint (Package_SO:VSSOP-8_2.3x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | GND | Power in |
| 2 | VREF1 | Power in |
| 3 | SCL1 | Input/output |
| 4 | SDA1 | Input/output |
| 5 | SDA2 | Input/output |
| 6 | SCL2 | Input/output |
| 7 | VREF2 | Power in |
| 8 | EN | Input |
Open-source boards using it
2- 4 layers53 × 35.2 mm

- 8 layers

Parts like it
8SN74LVC1G123DCU
TSSOP8Single Retriggerable Monostable Multivibrator with Schmitt-Trigger InputTexas InstrumentsUncategorisedLSF0102DCU
TSSOP82 Channel Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull ApplicationTexas InstrumentsUncategorisedSN74AUP2G80DCU
TSSOP8Low-Power Dual Positive-Edge-Triggered D-Type Flip-FlopTexas InstrumentsUncategorisedSN74AXCH2T45DCU
TSSOP82-Bit Dual-Supply Bus Transceiver with Configurable Level-Shifting and Bus-Hold InputsTexas InstrumentsUncategorisedSN74LVC2G80DCU
TSSOP8Dual Positive-Edge-Triggered D-Type Flip-FlopTexas InstrumentsUncategorisedTCA9406DCU
TSSOP82-Bit Bidirectional 1-MHz, I2C Bus and SMBus Voltage-Level Translator with 8-kV HBM ESDTexas InstrumentsUncategorisedTXS0102DCU
TSSOP82-Bit Bidirectionnal Voltage-Level Translator for Open-Drain and Push-Pull ApplicationsTexas InstrumentsUncategorisedSN74LVC2G02DCU
TSSOP8Dual 2-Input Positive-NOR GateTexas InstrumentsUncategorised
Questions
Is there a KiCad symbol and footprint for the PCA9306DCU?
Yes. The symbol is Interface:PCA9306 and the footprint Package_SO:VSSOP-8_2.3x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the PCA9306DCU?
TSSOP8, with 8 pins. Its footprint is drawn on this page.
What can replace the PCA9306DCU?
Parts like it in the library: the SN74LVC1G123DCU by Texas Instruments, the LSF0102DCU by Texas Instruments, the SN74AUP2G80DCU by Texas Instruments and the SN74AXCH2T45DCU by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the PCA9306DCU?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.