Skip to the content
1234

MIC2940A-3.3WU

Microchip TechnologyExtended

-40℃~+125℃@(Tj) 1 1.25A 240uA 26V 3.3V 400uVrms 600mV@(1.25A) Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection Positive TO-263-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
microchip/MIC2940A-3.3WU
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-263-3
Pins
4
In stock
0 at JLCPCB (C641262)
Used on
7 open-source boards

Overview

The MIC2940A-3.3WU is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a TO-263-3 package with 4 pins. -40℃~+125℃@(Tj) 1 1.25A 240uA 26V 3.3V 400uVrms 600mV@(1.25A) Fixed Over Current Protection、Over Temperature Protection、Reverse connection protection Positive TO-263-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its footprint (EasyEDA_Cloud:TO-263-3L_L10.2-W9.0-P2.60-LS15.2-TL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C641262). 7 open-source boards in 5 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

1234
EasyEDA_Cloud:TO-263-3L_L10.2-W9.0-P2.60-LS15.2-TLFrom EasyEDA

Open-source boards using it

7
  • 2 layers265.5 × 132.3 mmDashdash, the printed circuit board in 3D

    Dashdash

    Churrosoft/Dashdash

    tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre

    272 parts1MIT
  • 4 layers100 × 100 mmMainboard uEFI, the printed circuit board in 3D

    Mainboard uEFI

    Churrosoft/OpenEFI-PCB_next

    142 parts1MIT
  • 4 layers99.9 × 123 mmUEFI rev3, the printed circuit board in 3D

    UEFI rev3

    Churrosoft/kibot_test

    export KICAD63DMODELDIR="/usr/share/kicad/3dmodels/" export KICAD6FOOTPRINTDIR="/usr/share/kicad/footprints/" export KICAD6SYMBOLDIR="/usr/share/kicad/symbols/" export KICAD6TEMPLATEDIR="/usr/share/kicad/template/"

    260 parts
  • 4 layers99.9 × 99.3 mmΜEFI rev2, the printed circuit board in 3D

    ΜEFI rev2

    Churrosoft/OpenEFI-PCB

    Coleccion de PCB y planos recomendados para montar una OpenEFI

    169 parts8CERN-OHL-S-2.0
  • 4 layers159.6 × 99.6 mmSTM32F rev3, the printed circuit board in 3D

    STM32F rev3

    Churrosoft/OpenEFI-PCB

    Coleccion de PCB y planos recomendados para montar una OpenEFI

    344 parts8CERN-OHL-S-2.0
  • 4 layers99 × 113 mmUEFI rev3, the printed circuit board in 3D

    UEFI rev3

    Churrosoft/OpenEFI-PCB

    Coleccion de PCB y planos recomendados para montar una OpenEFI

    267 parts8CERN-OHL-S-2.0
  • 2 layers50 × 50 mmRFID final version4, the printed circuit board in 3D

    RFID final version4

    tcegokul/PCB-designing

    Temp storage for PCBs done so far

    22 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MIC2940A-3.3WU?

Yes. the footprint EasyEDA_Cloud:TO-263-3L_L10.2-W9.0-P2.60-LS15.2-TL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MIC2940A-3.3WU?

TO-263-3, with 4 pins. Its footprint is drawn on this page.

Where is the MIC2940A-3.3WU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MIC2940A-3.3WU?

JLCPCB lists it as part C641262, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MIC2940A-3.3WU?

Parts like it in the library: the AZ1117CH-3.3TRG1 by Diodes Incorporated, the LM1084S-3.3/TR by HGSEMI, the UZ1085L-33-TN3-R by UTC and the LD1085D2T33R by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MIC2940A-3.3WU?

7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.