Skip to the content
123

LD1086DT33

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 1.5A 1.5V@(1.5A) 3.3V 30V 5mA 79dB@(120Hz) 99uVrms Fixed Positive Short Circuit Protection、Thermal shutdown TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD1086DT33
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252-2(DPAK)
Pins
3
In stock
3,426 at JLCPCB (C12051)
Used on
1 open-source board

Overview

The LD1086DT33 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a TO-252-2(DPAK) package with 3 pins. -40℃~+125℃@(Tj) 1 1.5A 1.5V@(1.5A) 3.3V 30V 5mA 79dB@(120Hz) 99uVrms Fixed Positive Short Circuit Protection、Thermal shutdown TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LD1086DT33TR, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-252-2, from KiCad's library), ready for a KiCad board. 3,426 are in stock at JLCPCB (part C12051). 1 open-source board in 1 repository on GitHub use it.

Symbol

1ADJ/GND2OUT3IN
Regulator_Linear:LD1086DT33TRFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:TO-252-2From KiCad's library

From the datasheet

13
Supply, least
4.9 V · VI, min for specified output, IO = 0 to 1.5 A · p. 11
Supply, most
30 V · VI, max for specified output, IO = 0 to 1.5 A · p. 11
Supply, absolute maximum
30 V · VI, absolute max · p. 7
Works from
-40 °C · TA, min for electrical characteristics · p. 11
Works up to
125 °C · TA, max for electrical characteristics · p. 11
Junction, hottest
125 °C · Operating junction temperature, max · p. 7
Takes working
5 mA · Quiescent current, typical, VI ≤ 30 V · p. 11
Gives
1.5 A · Guaranteed output current, max · p. 1
Current limit
2 A · Short-circuit current, typical, VI - VO = 5 V · p. 11
Output
3.3 V · Fixed output, typical, IO = 0 mA, TJ = 25 °C · p. 11
Dropout
1.3 V · Dropout voltage, typical, IO = 1.5 A · p. 11
Junction to case (DPAK)
8 K/W · Thermal resistance junction-case · p. 7
Junction to air (DPAK)
100 K/W · Thermal resistance junction-ambient · p. 7

What it is and has

3
Regulator type
1.5 A adjustable and fixed low drop positive voltage regulator · p. 1
Protection
Internal power and thermal limit · p. 1
Output tolerance
± 1% at 25 °C · p. 1

Specifications

20
ParameterConditionsAs printedPage
DC input voltage VImax 30 V7
Storage temperature range TSTGmin -55 · max 150 °C7
Operating junction temperature range TOPmin -40 · max 125 °C7
Thermal resistance junction-case RthJCDPAKtyp 8 °C/W7
Thermal resistance junction-ambient RthJADPAKtyp 100 °C/W7
Output voltage (1) VOVI = 6.3 V, CI = CO =10 uF; IO = 0 mA, TJ = 25 °Cmin 3.267 · typ 3.3 · max 3.333 V11
Output voltage (1) VOCI = CO =10 uF, TA = -40 to 125 °C; IO = 0 to 1.5 A, VI = 4.9 to 30 Vmin 3.234 · typ 3.3 · max 3.366 V11
Line regulation ΔVOCI = CO =10 uF; IO = 0 mA, VI = 4.9 to 18 V, TJ = 25 °Ctyp 0.5 · max 6 mV11
Line regulation ΔVOCI = CO =10 uF, TA = -40 to 125 °C; IO = 0 mA, VI = 4.9 to 18 Vtyp 1 · max 6 mV11
Load regulation ΔVOVI = 6.3 V, CI = CO =10 uF; IO = 0 to 1.5 A, TJ = 25 °Ctyp 1 · max 10 mV11
Load regulation ΔVOVI = 6.3 V, CI = CO =10 uF, TA = -40 to 125 °C; IO = 0 to 1.5 Atyp 7 · max 25 mV11
Dropout voltage VdCI = CO =10 uF, TA = -40 to 125 °C; IO = 1.5 Atyp 1.3 · max 1.5 V11
Quiescent current IqCI = CO =10 uF, TA = -40 to 125 °C; VI ≤ 30 Vtyp 5 · max 10 mA11
Short-circuit current IscCI = CO =10 uF, TA = -40 to 125 °C; VI - VO = 5 Vmin 1.5 · typ 2 A11
Short-circuit current IscCI = CO =10 uF, TA = -40 to 125 °C; VI - VO = 25 Vmin 0.05 · typ 0.2 A11
Thermal regulationVI = 6.3 V, CI = CO =10 uF; TA = 25 °C, 30 ms pulsetyp 0.008 · max 0.04 %/W11
Supply voltage rejection SVRCI = 10 uF, TA = -40 to 125 °C; f = 120 Hz, CO = 25 uF, IO = 1.5 A, VI = 8.3 ± 3 Vmin 60 · typ 79 dB11
RMS output noise voltage (% of VO) eNVI = 6.3 V, CI = CO =10 uF; TA = 25 °C, f =10 Hz to 10 kHztyp 0.003 %11
Temperature stability SVI = 6.3 V, CI = CO =10 uF, TA = -40 to 125 °Ctyp 0.5 %11
Long term stability SVI = 6.3 V, CI = CO =10 uF; TA = 125 °C, 1000 Hrstyp 0.5 %11

Ordering codes, by the datasheet

22
LD1086V18-DG
TO-220 · 1.8 V output · p. 39
LD1086D2T18TR
D²PAK · 1.8 V output · p. 39
LD1086DT18TR
DPAK · 1.8 V output · p. 39
LD1086DT25TR
DPAK · 2.5 V output · p. 39
LD1086V33-DG
TO-220 · 3.3 V output · p. 39
LD1086D2T33TR
D²PAK · 3.3 V output · p. 39
LD1086D2M33TR
D²PAK/A · 3.3 V output · p. 39
LD1086DT33TR
DPAK · 3.3 V output · p. 39
LD1086D2T50TR
D²PAK · 5.0 V output · p. 39
LD1086DT50TR
DPAK · 5.0 V output · p. 39
LD1086D2T12TR
D²PAK · 12.0 V output · p. 39
LD1086V-DG
TO-220 · Adjustable output · p. 39
LD1086D2TTR
D²PAK · Adjustable output · p. 39
LD1086D2MTR
D²PAK/A · Adjustable output · p. 39
LD1086DTTR
DPAK · Adjustable output · p. 39
LD1086PUR
DFN8 (4x4) · Adjustable output · p. 39
LD1086VY
TO-220 · Adjustable output; automotive grade · p. 39
LD1086DTTRY
DPAK · Adjustable output · p. 39
LD1086BV-DG
TO-220 · Adjustable output; LD1086B variant · p. 39
LD1086BD2TTR
D²PAK · Adjustable output; LD1086B variant · p. 39
LD1086BD2MTR
D²PAK/A · Adjustable output; LD1086B variant · p. 39
LD1086BDTTR
DPAK · Adjustable output; LD1086B variant · p. 39

Open-source boards using it

1
  • 2 layers179.1 × 67.9 mmControl Board, the printed circuit board in 3D

    Control Board

    Alan-JH/PCB-Heater

    Reflow hotplate PCB design

    77 parts6

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD1086DT33?

Yes. The symbol is Regulator_Linear:LD1086DT33TR and the footprint Package_TO_SOT_SMD:TO-252-2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD1086DT33?

TO-252-2(DPAK), with 3 pins. Its footprint is drawn on this page.

Where is the LD1086DT33 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD1086DT33?

JLCPCB lists it as part C12051, with 3,426 in stock; the sellers' links on this page open their listings.

What can replace the LD1086DT33?

Parts like it in the library: the UZ1085L-33-TN3-R by UTC, the AMS1086CD-3.3 by Advanced Monolithic Systems, the BL1084-33-CY by BL and the LD29150DT33R by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD1086DT33?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.