Skip to the content
123

MIC2940A-5.0WT

Microchip TechnologyExtended

-40℃~+125℃ 1 1.25A 26V 400uVrms 500uA 5V 600mV@(1.25A) Fixed Over Current Protection、Over Temperature Protection Positive TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
microchip/MIC2940A-5.0WT
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-220-3
Pins
3
In stock
0 at JLCPCB (C641263)
Used on
6 open-source boards

Overview

The MIC2940A-5.0WT is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a TO-220-3 package with 3 pins. -40℃~+125℃ 1 1.25A 26V 400uVrms 500uA 5V 600mV@(1.25A) Fixed Over Current Protection、Over Temperature Protection Positive TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_THT:TO-220-3_Vertical, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C641263). 6 open-source boards in 4 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUTFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_THT:TO-220-3_VerticalFrom KiCad's library

Pinout

3
The pins of the MIC2940A-5.0WT
PinNameType
1INPower in
2GNDPower in
3OUTPower out

Open-source boards using it

6
  • 2 layers265.5 × 132.3 mmDashdash, the printed circuit board in 3D

    Dashdash

    Churrosoft/Dashdash

    tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre

    272 parts1MIT
  • 4 layers100 × 100 mmMainboard uEFI, the printed circuit board in 3D

    Mainboard uEFI

    Churrosoft/OpenEFI-PCB_next

    142 parts1MIT
  • 4 layers99.9 × 123 mmUEFI rev3, the printed circuit board in 3D

    UEFI rev3

    Churrosoft/kibot_test

    export KICAD63DMODELDIR="/usr/share/kicad/3dmodels/" export KICAD6FOOTPRINTDIR="/usr/share/kicad/footprints/" export KICAD6SYMBOLDIR="/usr/share/kicad/symbols/" export KICAD6TEMPLATEDIR="/usr/share/kicad/template/"

    260 parts
  • 4 layers99.9 × 99.3 mmΜEFI rev2, the printed circuit board in 3D

    ΜEFI rev2

    Churrosoft/OpenEFI-PCB

    Coleccion de PCB y planos recomendados para montar una OpenEFI

    169 parts8CERN-OHL-S-2.0
  • 4 layers159.6 × 99.6 mmSTM32F rev3, the printed circuit board in 3D

    STM32F rev3

    Churrosoft/OpenEFI-PCB

    Coleccion de PCB y planos recomendados para montar una OpenEFI

    344 parts8CERN-OHL-S-2.0
  • 4 layers99 × 113 mmUEFI rev3, the printed circuit board in 3D

    UEFI rev3

    Churrosoft/OpenEFI-PCB

    Coleccion de PCB y planos recomendados para montar una OpenEFI

    267 parts8CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MIC2940A-5.0WT?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT and the footprint Package_TO_SOT_THT:TO-220-3_Vertical, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MIC2940A-5.0WT?

TO-220-3, with 3 pins. Its footprint is drawn on this page.

Where is the MIC2940A-5.0WT datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MIC2940A-5.0WT?

JLCPCB lists it as part C641263, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MIC2940A-5.0WT?

Parts like it in the library: the LM1084IT-5.0 by HGSEMI, the LM1084IT-5.0G by HANSCHIP semiconductor, the LM1084T-5.0 by HGSEMI and the LM1086IT-5.0G by HANSCHIP semiconductor. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MIC2940A-5.0WT?

6 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.