
OpenEFI rev4 bkp
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI

Coleccion de PCB y planos recomendados para montar una OpenEFI
ΜEFI rev2 is an open-source printed circuit board by Churrosoft, from the Churrosoft/OpenEFI-PCB repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 99.9 × 99.3 mm with 169 parts on 209 nets, routed with 2,048 tracks and 228 vias.
It is built around the TJA1042T-3,118-TD, ISL9V5045S3ST and LM321, with the MAX9926UAEE+, MCZ33810EK and MIC2940A-3.3WU among its other parts. Its parts include 52 resistors, 39 capacitors, 21 ICs, 14 diodes and 10 transistors. It belongs with the STM32 boards of this library.
Coleccion de PCB y planos recomendados para montar una OpenEFI
OpenEFI es un ECU/EFI programable basada en arduino, totalmente OpenSource, fue creada originalmente para reemplazar una ecu existente en un motor naftero, pero tambien se puede usar para agregar inyeccion y/o encendido electronico a un motor antiguo, cuenta tambien con soporte para DTC's y autodiagnostico
Dibujos: Lucacik / ig: https://www.instagram.com/luca.cik/
si quieres usar otra placa basada en Arduino (Uno, Mega,DUE,etc), puedes hacerlo, pero los pcb no te serviran y capaz tengas que modificar ligeramente el codigo y el mapeo de los pines, proximamente agregare mas pcb ademas de mejorar los existentes
This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE.
Please see LICENSE file for applicable conditions.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | R_Small | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R24, R25, R26, R27, R29, R30, R121, R122 |
| 10 | 4.99K 1/2W | Resistor_SMD:R_1210_3225Metric | R81, R112, R113, R114, R115, R116, R117, R118, R119, R120 |
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5, C9, C10, C11, C12, C13, C14, C15, C17 |
| 9 | LED | LED_SMD:LED_0603_1608Metric | D1, D5, D6, D7, D8, D9, D10, D12, D13 |
| 8 | 10nF | Capacitor_SMD:C_0603_1608Metric | C23, C24, C25, C26, C27, C28, C29, C30 |
| 8 | SensorsV2 | OpenEFI-STM32F_rev3:Sensors_v2 | U2, U8, U9, U10, U11, U12, U13, U14 |
| 6 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C52, C53, C54, C55, C56, C57 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3, TP4, TP5, TP6, TP7, TP8 |
| 5 | 10pF | Capacitor_SMD:C_0603_1608Metric | C18, C19, C20, C21, C22 |
| 5 | Jumper_NC_Small | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP11, JP15, JP17, JP18, JP19 |
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP23, JP24 |
| 4 | 36K | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16 |
| 4 | 4.02k | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 4 | ISL9V5045S3ST | Package_TO_SOT_SMD:TO-263-2 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole | TestPoint:TestPoint_Pad_D1.0mm | H5, H6, H7, H8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 10R 1/10W | Resistor_SMD:R_0603_1608Metric | R18, R20, R33 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R108, R109 |
| 3 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q6, Q7, Q10 |
| 3 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q5, Q8, Q9 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 15pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 1N4148 | Diode_SMD:D_SOD-523 | D2, D3 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R31, R32 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 240pF | Capacitor_SMD:C_0603_1608Metric | C49, C51 |
| 2 | DZ2S033X0L | Diode_SMD:D_MiniMELF | D14, D18 |
| 2 | LM321 | Package_TO_SOT_SMD:SOT-23-5 | U27, U31 |
| 2 | R_Small | Resistor_SMD:R_1206_3216Metric | R1, R28 |
| 2 | TPL7407LAPWR | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U20, U22 |
| 1 | 0.01R | Resistor_SMD:R_1210_3225Metric | R21 |
| 1 | 0.02R | Resistor_SMD:R_2512_6332Metric | R8 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C36 |
| 1 | 100k 1/10W +-1% | Resistor_SMD:R_0603_1608Metric | R82 |
| 1 | 10K 1/10W | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 1M 1/10W | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R97 |
| 1 | 20k 1/10W +-1% | Resistor_SMD:R_0603_1608Metric | R83 |
| 1 | 25LCxxx | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 28.6k +-1% | Resistor_SMD:R_0603_1608Metric | R92 |
| 1 | 3.32k +-1% | Resistor_SMD:R_0603_1608Metric | R87 |
| 1 | 36638-0002 | OpenEFI-STM32F_rev3:366380002 | J3 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C34 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 4.99K 1/10W | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C33 |
| 1 | 57.6K 1/10W | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | BOOT0 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | BOOT1 | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | LT4363IMS | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U6 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Logo2_14.6x12mm_SilkScreen | LOGO1 |
| 1 | MAX9926UAEE+ | OpenEFI-STM32F_rev3:SOP63P602X175-16N | U36 |
| 1 | MCZ33810EK | OpenEFI-STM32F_rev3:SOP65P1030X245-33N | U1 |
| 1 | MIC2940A-3.3WU | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U4 |
| 1 | MIC2940A-5.0WT | Package_TO_SOT_THT:TO-220-3_Vertical | U5 |
| 1 | PaP_Driver_v1 | OpenEFI-STM32F_rev3:DIP-16_598_ELL | U23 |
| 1 | SMAJ58CA | Diode_SMD:D_SMA | D4 |
| 1 | STM32F407VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | SYM_Hot_Small | Symbol:KiCad-Logo2_6mm_SilkScreen | SYM1 |
| 1 | TJA1042T3118 | Package_SO:HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm | U15 |
| 1 | Tag connect | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |

Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI

Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI

Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI

Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI

Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI

Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI

Churrosoft/kibot_test
export KICAD63DMODELDIR="/usr/share/kicad/3dmodels/" export KICAD6FOOTPRINTDIR="/usr/share/kicad/footprints/" export KICAD6SYMBOLDIR="/usr/share/kicad/symbols/" export KICAD6TEMPLATEDIR="/usr/share/kicad/template/"


Churrosoft/Dashdash
tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre

Churrosoft/uEFI-v6.x
Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC




andreika-git/hellen-one
Hellen-One Hardware Platform for rusEFI Engine Management System
It measures 99.9 × 99.3 mm and has 4 copper layers, 1.6 mm thick.
169 parts, built around the TJA1042T-3,118-TD, ISL9V5045S3ST, LM321 and MAX9926UAEE+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Churrosoft/OpenEFI-PCB repository on GitHub, at the commit this page was made from: the board is µEFI_rev2/µEFI_rev2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).