
Filament scale pcb
chof747/filament-scale-pcb
A small board for my samla-filament-scale-box

A small board for my samla-filament-scale-box
Mcu breakout is an open-source printed circuit board by chof747, from the chof747/filament-scale-pcb repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 47 × 59.5 mm with 22 parts on 23 nets, routed with 208 tracks and 20 vias.
It is built around the RP2040-ZERO. Its parts include 5 connectors, 3 capacitors, 2 resistors, 1 IC and 1 switch. It belongs with the interfaces and adapters boards and the RP2040 boards of this library.
This is the electronics part of the filamentalist samla box which consists of:
A board that bears the MCU and brain of the Filamentalist Box it has
Arduino Nano as the MCU
0.9" OLED
2x SMD Push Buttons
3 IDC headers
1 JST XH 2.54mm header (environmental sensor)
HX711 ADC
Screw terminal for Load cell connections
IDC Header to MCU
Peripheral JST xh 2.54mm for peripherals
V1.0 - Send to production 26.07.2025 Breakout Board V1.1 - separated clock lines for the three scales
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | Clk 1 | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | Clk 2 | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | Clk 3 | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | Dat 1 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | Dat 2 | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | Dat 3 | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | Environment | Chof747_Connectors:JST_XH_B4B-XH-A_1x04_P2.54mm_Vertical | J5 |
| 1 | LOGO | LOGO | G*** |
| 1 | Mod | Chof747_Footprints:KEY-SMD_L3.9-W3.0-LS5.0-EH | SW1 |
| 1 | OLED | Chof747_Footprints:OLED-TH_L38.0-W12.0_HS91L02W2C01 | OLED1 |
| 1 | RP2040-ZERO | Chof747_MCUs:RP2040-ZERO-THP | U1 |
| 1 | SCALE 1 | Chof747_Connectors:HDR-TH_6P-P2.54-V-F-R2-C3-S2.54-4 | J3 |
| 1 | SCALE 2 | Chof747_Connectors:HDR-TH_6P-P2.54-V-F-R2-C3-S2.54-4 | J2 |
| 1 | SCALE 3 | Chof747_Connectors:HDR-TH_6P-P2.54-V-F-R2-C3-S2.54-4 | J1 |
| 1 | SCL | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | SDA | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | Spare | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |

chof747/filament-scale-pcb
A small board for my samla-filament-scale-box



beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.


ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

nmur/RP2040-TestPatternGenerator
A simple test pattern generator running on the RP2040 microcontroller

ChrisChrisLoLo/bunchiez40
A pocket keyboard that makes use of mouse switches to achieve a miniscule size

It measures 47 × 59.5 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the chof747/filament-scale-pcb repository on GitHub, at the commit this page was made from: the board is mcu-breakout/mcu-breakout.kicad_pcb and its schematic mcu-breakout/mcu-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).