Skip to the content
2 layers.kicad_pcb, the printed circuit board in 3D

The Kicad design files associated with the DroneBumper.

Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
35
Pads
178
Tracks, vias
68, 0
Routed
Yes
KiCad
KiCad 3
Created
15 Sep 2015
Updated
20 Sep 2015

Overview

.kicad_pcb is an open-source printed circuit board by charlesrwest, from the charlesrwest/droneBumperPCB repository on GitHub. It is a 2-layer board with 30 parts on 35 nets, routed with 68 tracks and 0 vias.

It is built around the STM32F072C8T6, 0402ZD475MAT2A and VJ0402Y471KXXCW1BC. Its parts include 10 capacitors, 2 transistors, 2 switches, 1 resistor and 1 diode. It belongs with the STM32 boards of this library.

Main components

3

Parts

30
QtyValueFootprintReferences
10DF13-4DF13C-4P-1.25V(20)DF13-CON4-1, DF13-CON4-2, DF13-CON4-3, DF13-CON4-4, DF13-CON4-5, DF13-CON4-6, DF13-CON4-7, DF13-CON4-8, DF13-CON4-9, DF13-CON4-10
4GRM155R71C104KA88D0402CapC2, C7, C8, C9
30402ZD475MAT2A0402CapC5, C6, C10
2IRF7820PBFIRF7820PBFQ1, Q2
1720-LYQ396P1Q236720-LYQ396P1Q236D1
1C0402X5R1A103M020BC0402CapC3
1C1005X5R1A105K050BB0402CapC1
1DF13-6DF13C-6P-1.25V(20)DF13-CON6-1
1ERJ-2RKF1002X0402CapR1
1MIC5205-3.3YM5_TRMIC5205-3.3YM5TRREG1
1PTS810 SJM 250 SMTR LFSPTS810-SJM-250-SMTR-LFSSW2
1STM32F072C8T6STM32F072C8T6MCU1
1SW_PUSHPTS810-SJM-250-SMTR-LFSSW1
1USB-MICRO-CONmicro-USBConUSB1
1VJ0402Y471KXXCW1BC0402CapC4

More from charlesrwest/droneBumperPCB

1
  • 2 layers43 × 50 mmDroneBumper, the printed circuit board in 3D

    DroneBumper

    charlesrwest/droneBumperPCB

    The Kicad design files associated with the DroneBumper.

    30 parts

Similar boards

  • 2 layers39 × 50 mmCANInstallHub, the printed circuit board in 3D

    CANInstallHub

    charlesrwest/CANInstallHub

    A temporary home for the PCB design files for the CANInstallPrototype

    53 parts
  • 2 layers82.8 × 63 mmBldc BMS, the printed circuit board in 3D

    Bldc BMS

    mpater/bldc-BMS

    Battery management system for a VESC

    175 parts26
  • 2 layers50 × 75 mmLocalTrack, the printed circuit board in 3D

    LocalTrack

    krakrukra/LocalTrack

    OSHW GPS Tracker (Logger)

    63 parts18MIT
  • 2 layers26.1 × 15 mmUsb2can pcb, the printed circuit board in 3D

    Usb2can pcb

    myaki-moe/usb2can

    A compact and low cost open source USB to CAN bus adaptor. 紧凑且低成本的开源USB到CAN总线适配器

    19 parts10GPL-3.0
  • 2 layers50 × 100 mmActiveLoad, the printed circuit board in 3D

    ActiveLoad

    ahessling/ActiveLoad

    Small 12 Watt Active Load (dummy load) with STM32 microcontroller

    83 parts5MIT
  • 2 layers100 × 50 mmWindowMaster, the printed circuit board in 3D

    WindowMaster

    agausmann/WindowMaster

    A physical controller for the Windows Volume Mixer (sndvol)

    81 parts3
  • 2 layers59 × 22 mmCANberry, the printed circuit board in 3D

    CANberry

    joshajohnson/car-hacking

    A repo for assorted tools, projects, and documentation.

    86 parts2
  • 4 layers50 × 20 mmGCode Buttons MCU, the printed circuit board in 3D

    GCode Buttons MCU

    meteyou/klipper-gcode-buttons

    The Klipper Gcode-Buttons offer a unique control and status display solution in 3D printers and automated systems.

    57 parts2GPL-3.0

Questions

What parts does the .kicad_pcb use?

30 parts, built around the STM32F072C8T6, 0402ZD475MAT2A and VJ0402Y471KXXCW1BC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the .kicad_pcb KiCad files?

From the charlesrwest/droneBumperPCB repository on GitHub, at the commit this page was made from: the board is .kicad_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the .kicad_pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask charlesrwest before reusing the design.