Skip to the content
2 layers100 × 60 mmDspic controller, the printed circuit board in 3D

Dspic controller

cclienti/tig-welder8

A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

Size
100 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
79
Nets
49
Pads
221
Tracks, vias
534, 10
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
13 May 2021
Updated
25 Nov 2023

Overview

Dspic controller is an open-source printed circuit board by cclienti, from the cclienti/tig-welder repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 60 mm with 79 parts on 49 nets, routed with 534 tracks and 10 vias.

It is built around the 74LS32SC, BSS138 and MBR1020VL, with the PN2222A among its other parts. Its parts include 22 resistors, 21 capacitors, 19 connectors, 5 ICs and 4 transistors. It belongs with the PIC boards of this library.

Main components

4

README

README.md

TIG Welder Project

Parts

79
QtyValueFootprintReferences
16100nCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2, C3, C4, C5, C6, C7, C8, C10, C12, C15, C16, C17, C18, C19, C20, C21
1010kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R3, R5, R10, R11, R12, R14, R15, R16
8620Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR7, R8, R17, R18, R19, R20, R21, R22
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3BSS138Package_TO_SOT_SMD:SOT-23_HandsolderingQ2, Q3, Q4
21kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR6, R9
227pCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC11, C13
274LS32Package_DIP:DIP-14_W7.62mmU4, U5
1100uCapacitor_SMD:CP_Elec_6.3x5.4C9
110uCapacitor_SMD:CP_Elec_5x5.3C14
115kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4
133 / 0.5WResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR13
1470uCapacitor_THT:CP_Radial_D13.0mm_P5.00mmC1
1CrystalCrystal:Crystal_SMD_HC49-SDY1
1DDiode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD2
1DSPIC30F4012Package_DIP:DIP-28_W7.62mmU3
1Enable0Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ16
1Enable1Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ17
1ExtConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1GazConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ19
1HASS 100-SConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1HFConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ18
1HighSide0Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ13
1HighSide1Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ14
1ICSPConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ9
1LED MatrixConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ15
1LM1085-3.3Package_TO_SOT_THT:TO-220-3_VerticalU2
1LM1085-5.0Package_TO_SOT_THT:TO-220-3_VerticalU1
1LOGOdspic-controller:welder_footprintG***
1LowSide0Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ10
1LowSide1Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ11
1MBR1020VLDiode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1
1PN2222APackage_TO_SOT_THT:TO-18-3Q1
1PedalConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Power InputConnector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_VerticalJ1
1RotEncoderAConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6
1RotEncoderBConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ7
1SpeakerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ12
1SwitchConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
1Temp. SensorConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3

More from cclienti/tig-welder

5
  • 2 layers130 × 80 mmPico controller, the printed circuit board in 3D

    Pico controller

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    125 parts8GPL-3.0
  • 2 layers53.3 × 50.8 mmPower driver, the printed circuit board in 3D

    Power driver

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    36 parts8GPL-3.0
  • 2 layers100 × 45 mmSmall power, the printed circuit board in 3D

    Small power

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    31 parts8GPL-3.0
  • 2 layers80 × 60 mmSlow switching outputs, the printed circuit board in 3D

    Slow switching outputs

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    24 parts8GPL-3.0
  • 2 layers60 × 51 mmHalf bridge mod, the printed circuit board in 3D

    Half bridge mod

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    20 parts8GPL-3.0

Similar boards

  • 2 layers110 × 75 mmCross table, the printed circuit board in 3D

    Cross table

    cclienti/mechanics

    Some CAO files

    86 partsGPL-3.0
  • 2 layers160.5 × 100.2 mm8080 Board, the printed circuit board in 3D

    8080 Board

    sladek/SBC_8080_ECB

    This is my attempt to build a single-board microcomputer based on the Intel 8080 CPU. It contains the following features:

    112 parts
  • 2 layers21 × 49.5 mmHackducky, the printed circuit board in 3D

    Hackducky

    hackclub/hackducky

    The hackclub themed USB rubber ducky ! - Check out hackducky

    51 parts33
  • 2 layers124 × 79 mmPico profile, the printed circuit board in 3D

    Pico profile

    BwanaFr/pico-profile

    An Apple Profile emulator based on Raspberry Pi Pico MCU

    42 parts14
  • 4 layers142.1 × 143 mmFlipper black ki cad, the printed circuit board in 3D

    Flipper black ki cad

    Broccoliux/Black-Flipper

    A device that out smart Flipper Zero in every aspect.

    216 parts7
  • 2 layers67 × 84 mmEcp5 soc hat, the printed circuit board in 3D

    Ecp5 soc hat

    daveshah1/ecp5-hat

    SoC hat for ECP5 Versa & EVN boards

    34 parts6
  • 2 layers76.3 × 49.6 mmEls esp32, the printed circuit board in 3D

    Els esp32

    guidoschreuder/els-esp32

    Port of Clough42's electronic leadscrew to ESP32

    63 parts6

Questions

How big is the Dspic controller PCB?

It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dspic controller use?

79 parts, built around the 74LS32SC, BSS138, MBR1020VL and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dspic controller KiCad files?

From the cclienti/tig-welder repository on GitHub, at the commit this page was made from: the board is boards/dspic-controller/dspic-controller.kicad_pcb and its schematic boards/dspic-controller/dspic-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dspic controller design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).