

Ecp5 soc hat
SoC hat for ECP5 Versa & EVN boards
- Size
- 67 × 84 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 89
- Pads
- 256
- Tracks, vias
- 563, 188
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 Oct 2018
- Updated
- 31 Oct 2018
Overview
Ecp5 soc hat is an open-source printed circuit board by daveshah1, from the daveshah1/ecp5-hat repository on GitHub. It is a 2-layer board of 67 × 84 mm with 34 parts on 89 nets, routed with 563 tracks and 188 vias.
It is built around the 74HC244D, LM2731XMF and MBR1020VL. Its parts include 13 capacitors, 8 resistors, 3 ICs, 3 connectors and 3 crystals. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
374HC244D
SO-20-300mil-40℃~+125℃ 160uA 2 2V~6V 4 6mA 6mA 74HC 9ns@5V,15pF Tri-State Unidirectional SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversLM2731XMF
SOT-23-5-40℃~+125℃@(TJ) 1 1.6MHz 1.8A 2.7V~14V 2.7V~22V Boost Boost Built-in No SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMBR1020VL
SOD-123F-55℃~+125℃ 1 Independent 1A 20V 340mV@1A 45A 600uA@20V SOD-123F Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdecp5-hat
This board adds 64MB of SDRAM, 4-bit RGB+bright VGA output and a USB host connector to the Lattice ECP5 Versa and ECP5 Evaluation Board
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8 |
| 5 | 4.7µ | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C9, C11, C12, C13 |
| 3 | DNP | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8 |
| 2 | HDR40 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | X3, X4 |
| 2 | R_Pack04 | Resistor_SMD:R_Array_Convex_4x0402 | RN1, RN2 |
| 1 | 13.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 44.2k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 620p | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 74HC244 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U2 |
| 1 | 8.2µ/SRN6045 | Custom Parts:SRN6045 | L1 |
| 1 | AS4C32M16SB | Package_SO:TSOP-II-54_22.2x10.16mm_P0.8mm | U1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | DB15_Female_HighDensity_MountingHoles | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J1 |
| 1 | LM2731XMF | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MBR1020VL | Diode_SMD:D_SOD-123F | D1 |
| 1 | USB_A | Custom Parts:292303-7 | J2 |
| 1 | XO32 | Oscillator:Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm | X1 |
Similar boards
- 2 layers66 × 138.5 mm

- 2 layers51 × 60 mm

- 2 layers88 × 86 mm

Dumber v3
INSA-GEI/dumber
Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.
70 parts9GPL-3.0 - 2 layers40 × 39 mm

- 2 layers21 × 49.5 mm

- 2 layers124 × 79 mm

- 2 layers130 × 80 mm

Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 4 layers142.1 × 143 mm

Flipper black ki cad
Broccoliux/Black-Flipper
A device that out smart Flipper Zero in every aspect.
216 parts7
Questions
How big is the Ecp5 soc hat PCB?
It measures 67 × 84 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ecp5 soc hat use?
34 parts, built around the 74HC244D, LM2731XMF and MBR1020VL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ecp5 soc hat KiCad files?
From the daveshah1/ecp5-hat repository on GitHub, at the commit this page was made from: the board is hardware/ecp5_soc_hat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ecp5 soc hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask daveshah1 before reusing the design.