

HW roggeluc linortho
- Size
- 66 × 138.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 171
- Pads
- 392
- Tracks, vias
- 820, 162
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Mar 2025
- Updated
- 27 May 2025
Overview
HW roggeluc linortho is an open-source printed circuit board by Newtonsohn, from the Newtonsohn/PM4_Radar repository on GitHub, published under the MIT licence. It is a 2-layer board of 66 × 138.5 mm with 108 parts on 171 nets, routed with 820 tracks and 162 vias.
It is built around the LM2731XMF, BSS316N and SS13L, with the BH-18650-PC, SMT-0827-S-HT-R and SI2319CDS among its other parts. Its parts include 37 resistors, 24 capacitors, 8 transistors, 6 ICs and 4 connectors.
Main components
6LM2731XMF
SOT-23-5-40℃~+125℃@(TJ) 1 1.6MHz 1.8A 2.7V~14V 2.7V~22V Boost Boost Built-in No SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersBSS316N
SOT-23MOSFETsTECH PUBLICSS13L
SMA-55℃~+125℃ 1 Independent 1A 30A 30V 400uA@30V 500mV@1A SMA Schottky Diodes ROHSTaiwan SemiconductorSchottky DiodesBH-18650-PC
--40℃~+180℃ 18650 Battery holder - Button And Strip Battery Connector ROHSMPDButton And Strip Battery ConnectorSMT-0827-S-HT-R
--40℃~+105℃ 2.7kHz 2V~5V 3.3mm 8.5mm 8.5mm 85dB Electromagnetic Passive (Externally Driven) - Buzzers ROHSPUI Audio, Inc.BuzzersSI2319CDS
SOT-23-55℃~+150℃ 1 P-Channel 108mΩ@4.5V 2.5V 2.5W 21nC@10V 4.4A 40V 595pF 61pF 76pF P-Channel SOT-23 MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R20, R21, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38 +4 |
| 15 | ~ | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP1, TP2, TP4, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP16, TP17, TP18, TP19, TP20 |
| 13 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 |
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C23, C25, C26, C27, C28, C29, C30 |
| 7 | BSS316N | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R39, R40, R46, R49, R53, R54 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R52 |
| 2 | 10kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R44 |
| 2 | DIN41612_02x32_AB | Connector_PinSocket_2.54mm:PinSocket_2x32_P2.54mm_Vertical | P3, P4 |
| 2 | LEDcharge | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | CHARGE2, CRG1 |
| 2 | MCP6002-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7, U8 |
| 2 | SS13L | Diode_SMD:D_SMA | SD2, SD3 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 10 uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31 |
| 1 | 2.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45 |
| 1 | 30.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R43 |
| 1 | 51k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R47 |
| 1 | AP9101CK | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | BH-18650-PC | BH-18650-PC:BAT_BH-18650-PC | BT1 |
| 1 | CH1 | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP6 |
| 1 | CH2 | TestPoint:TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded | TP7 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | LEDcompl | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | FULL1 |
| 1 | LEDpower | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | PWR1 |
| 1 | LEDred | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | LED3 |
| 1 | LM2731XMF | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | MCP73833-xxx-MF | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.58x2.35mm | U2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J1 |
| 1 | Radar K-LC5-RFB-00C | HW_template:Radar_K-LC5 | Y4 |
| 1 | SMT-0827-S-HT-R | SMT-0827-S-HT-R:XDCR_SMT-0827-S-HT-R | LS1 |
| 1 | SW_Push_Dual_x2 | Button_Switch_SMD:SW_SPST_EVQQ2 | SW1 |
| 1 | Si2319CDS | Package_TO_SOT_SMD:SOT-23 | Q10 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |
Similar boards
- 2 layers50 × 60 mm

- 2 layers61 × 88.9 mm

- 2 layers67 × 84 mm

- 2 layers51 × 60 mm

- 2 layers88 × 86 mm

Dumber v3
INSA-GEI/dumber
Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.
70 parts9GPL-3.0 - 2 layers40 × 39 mm

- 2 layers66 × 119.3 mm

HW Radar
DennisRathgeb/doppler-radar-detector
24 GHz CW Doppler + FMCW radar detector: STM32F429 + ESP32 + TouchGFX live UI, CMSIS-DSP FFT, FastAPI backend, YOLOv8 angle-of-arrival sensor fusion desktop app. ZHAW PM4 team project.
117 parts1MIT - 2 layers60 × 25 mm

Questions
How big is the HW roggeluc linortho PCB?
It measures 66 × 138.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HW roggeluc linortho use?
108 parts, built around the LM2731XMF, BSS316N, SS13L and BH-18650-PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HW roggeluc linortho KiCad files?
From the Newtonsohn/PM4_Radar repository on GitHub, at the commit this page was made from: the board is HW_roggeluc_linortho/HW_roggeluc_linortho.kicad_pcb and its schematic HW_roggeluc_linortho/HW_roggeluc_linortho.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HW roggeluc linortho design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).