4 layers42 × 42 mm
2 layers112 × 62 mm
Atkeyboard
ccadic/atmega328kb10Small computer KB for ATMEGA328P-AU
- Size
- 112 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 80
- Nets
- 29
- Pads
- 201
- Tracks, vias
- 1,121, 149
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Aug 2019
- Updated
- 29 Aug 2019
Overview
Atkeyboard is an open-source printed circuit board by ccadic, from the ccadic/atmega328kb repository on GitHub. It is a 2-layer board of 112 × 62 mm with 80 parts on 29 nets, routed with 1,121 tracks and 149 vias.
It is built around the ATMEGA328P-AU and ADXL345-EP. Its parts include 5 capacitors, 3 resistors, 3 connectors, 2 ICs and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdatmega328kb
Small computer KB for ATMEGA328P-AU
Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 60 | SW_Push_45deg | 18650:SW_TP1003 | 0_1, A1, Alt1, ALTGR1, B1, BkSp1, C6, CTRL1, D1, DEL1, DownArrow1, E1, ESC1, EUR1, F1, Fn1 +44 |
| 4 | MountingHole | Mounting_Holes:MountingHole_2.2mm_M2_ISO7380 | H2, H3, H4, H5 |
| 3 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C4, C5 |
| 2 | PUPSDA | Resistors_SMD:R_0805_HandSoldering | R3, R4 |
| 1 | 10k | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 8mhz | Crystals:Crystal_SMD_HC49-SD | Y1 |
| 1 | ADXL345 | 18650:ADXL345 | IC1 |
| 1 | AT328P-ProgPins | 4pads:4prog | J1 |
| 1 | ATmega328P-AU | Housings_QFP:LQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | ComClav | 4pads:6prog | J2 |
| 1 | INTx | 18650:2PADS | J4 |
| 1 | LOGO | 18650:SOA_Soldermask | G*** |
| 1 | LOGO | 18650:SOALogo2 | G*** |
Questions
How big is the Atkeyboard PCB?
It measures 112 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atkeyboard use?
80 parts, built around the ATMEGA328P-AU and ADXL345-EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atkeyboard KiCad files?
From the ccadic/atmega328kb repository on GitHub, at the commit this page was made from: the board is atkeyboard/atkeyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atkeyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask ccadic before reusing the design.
Similar boards
- 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers65 × 56 mm
- 2 layers61.3 × 89.6 mm
QuakeGuard PCB
GiZano/QuakeGuard
Distributed Earthquake Early Warning (EEW) system built on low-cost ESP32-C3 IoT sensors with Zero-Trust security, multi-node epicenter triangulation, and on-premise AI emergency reports.
17 parts24AGPL-3.0 - 6 layers60 × 60 mm
High Temp Load Cell Toolhead Board
garethky/ADS1220-Klipper-Board
A board for connecting up to 4 Load cells to an ADS1220
125 parts23GPL-3.0 - 2 layers184.2 × 71.2 mm
- 2 layers89.5 × 48 mm
Avionics
cuspaceflight/avionics14
Designed to be compiled with the GNU ARM Toolchain - https://launchpad.net/gcc-arm-embedded
115 parts4 - 2 layers49.6 × 43.6 mm
A1-Toolhead Board
DevCyclonekitten/Bambu-A1-Klipper
A repository about the development of modifying a bambu labs a1 printer to run on klipper
74 parts4GPL-3.0