

Generic Motorbike Electrical System
- Size
- 45.2 × 34.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 28
- Pads
- 132
- Tracks, vias
- 287, 24
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Mar 2023
- Updated
- 10 Sep 2026
Overview
Pcb c is an open-source printed circuit board by catinella, from the catinella/mbElectricalSystem repository on GitHub. It is a 2-layer board of 45.2 × 34.8 mm with 42 parts on 28 nets, routed with 287 tracks and 24 vias.
It is built around the BC817, MF-MSMF050-2 and TPCA8120,L1Q(CM. Its parts include 20 resistors, 10 transistors, 5 fuses and 1 diode.
Main components
3README
PCB/pcb-c/README.md
1.0 Files
| Files/Directories | Description |
|---|---|
| pcb-c.kicad_sch | Electric symbolic scheme |
| pcb-c.kicad_pcb | PCB |
(*) This project is covered by the GPL-3. Please, read that file for further information
2.0 Description:
This folder contains all files you need to build and/or modify the PCB placed in the rear side of the (DR350) motorbike. This circuit is a small power stage for the rear light indicators, stop light, and position light. Because all lights are available in LED format, the power stage is set to provide maximum 500mA (6W) per device.
2.1 Internals:
In order to fit this device in the DR350 rear size, I have tried to reduce the required space as much as possible. Also for this reason, normal fuses have been replaced by MSMF050 PTC Resettable Fuses.
All the power stage's outputs are equivalent but one is dedicated to the motorbike's starter relay. This relay type can be a big one, often. So, a fly-back diode is very important. For this reason I have used a M7 Rectifiers Diode.
3.0 Devices building:
The following images shows you the PCB shape it should be at the end

Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100K | Resistor_SMD:R_1206_3216Metric | R1, R3, R6, R8, R11, R12, R15, R16, R19, R21 |
| 10 | 15K | Resistor_SMD:R_1206_3216Metric | R2, R4, R5, R7, R9, R10, R13, R14, R17, R18 |
| 5 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q4, Q6, Q8 |
| 5 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | brakeLight_p1, leftArrow_p1, rearLight_p1, rightArrow_p1, startEngine_p1 |
| 5 | MF-MSMF050-2 | MF-MSMF050-2:FUSE_F050-2 | F1, F2, F3, F4, F5 |
| 5 | TPCA8120,L1Q | TPCA80120:TPH4R003NLL1Q | Q2, Q5, Q7, Q9, Q13 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | RearDevs1 |
| 1 | M7 | Diode_SMD:D_2114_3652Metric_Pad1.85x3.75mm_HandSolder | D1 |
More from catinella/mbElectricalSystem
1- 2 layers112.9 × 63.7 mm

Similar boards
- 2 layers48.6 × 55.5 mm

- 2 layers50 × 90 mm

- 2 layers13.7 × 21.4 mm

- 2 layers120 × 80 mm

Spikeling v3.2
OpenSourceNeuro/Spikeling
A hardware implementation of spiking neurons for neuroscience teaching and outreach
233 parts21GPL-3.0 - 2 layers68.6 × 53.3 mm

Sduino uno
roybaer/sduino_uno
A development board with STM8S105K6 MCU in Arduino UNO form factor
51 parts18 - 2 layers49.8 × 49.8 mm

IsoUSBRS422
alperyazar/isoUSBRS422
isoUSBRS422 is an isolated USB - RS422/RS485 converter. It is designed using KiCad. Repository includes KiCad project and necessary firmware files.
69 parts10 - 4 layers63 × 35.6 mm

Kibot variants arduprog
INTI-CMNB/kibot_variants_arduprog
A test/example of how to use KiBot assembly variants
47 parts9MIT - 2 layers440.5 × 124.9 mm

Gear85 hotswap flex cut, number pad
cosmosalad/Gear80
Gear80 is a 80% keyboard based on the rp2040.
335 parts7MIT
Questions
How big is the Pcb c PCB?
It measures 45.2 × 34.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb c use?
42 parts, built around the BC817, MF-MSMF050-2 and TPCA8120,L1Q(CM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb c KiCad files?
From the catinella/mbElectricalSystem repository on GitHub, at the commit this page was made from: the board is PCB/pcb-c/pcb-c.kicad_pcb and its schematic PCB/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb c design in my own project?
Its repository states no licence, so its author keeps all rights: ask catinella before reusing the design.