2 layers161.5 × 90.2 mm
Master
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
117 partsMIT
2 layers83.5 × 61.8 mm
Sensors
cactorium/UCFBrainStuffEEG software, alpha stages. Will be opensourced when it's working!
- Size
- 83.5 × 61.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 100
- Pads
- 221
- Tracks, vias
- 438, 55
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Dec 2014
- Updated
- 2 Oct 2015
Overview
Sensors is an open-source printed circuit board by cactorium, from the cactorium/UCFBrainStuff repository on GitHub, published under the MIT licence. It is a 2-layer board of 83.5 × 61.8 mm with 41 parts on 100 nets, routed with 438 tracks and 55 vias.
It is built around the TM4C123GH6PMI and ADP151AUJZ-3.3-R7. Its parts include 11 capacitors, 11 resistors, 5 connectors, 4 ICs and 2 diodes. It belongs with the sensors and measurement boards of this library.
Main components
2
TM4C123GH6PMI
LQFP-64(10x10)-40℃~+85℃ 1.08V~3.63V 12bit 256KB 2KB 32 Bit 32KB 43 80MHz ARM Cortex-M4F Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
ADP151AUJZ-3.3-R7
TSOT-23-5-40℃~+125℃ 1 200mA 230mV@(200mA) 3.3V 5.5V 55dB@(100kHz)、70dB@(10kHz) 9uVrms Fixed Over Current Protection Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdUCFBrainStuff
UCF senior design project, schematic files and other things. Will be open sourced at some point probably! All work is currently done in KiCAD but it may be converted to a different EDA software
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistors_SMD:R_0603 | R6, R7, R8, R9 |
| 3 | 330 | Resistors_SMD:R_0805 | R3, R4, R5 |
| 2 | 0.1u | Capacitors_SMD:C_0805 | C3, C9 |
| 2 | 9.0p | Capacitors_SMD:C_0603 | C5, C7 |
| 1 | 0.01u | Capacitors_SMD:C_0603 | C11 |
| 1 | 1.0u | Capacitors_SMD:C_0805 | C8 |
| 1 | 10k | Resistors_SMD:R_0805 | R11 |
| 1 | 10u | Capacitors_SMD:C_0805 | C1 |
| 1 | 16.00 MHz | Crystals_Oscillators_SMD:crystal_FA238-TSX3225 | X1 |
| 1 | 1K | Resistors_SMD:R_0603 | R2 |
| 1 | 1u | Capacitors_SMD:C_0603 | C10 |
| 1 | 2.3u | Capacitors_SMD:C_0603 | C6 |
| 1 | 2.5u | Capacitors_SMD:C_0805 | C4 |
| 1 | 220 | Resistors_SMD:R_0805 | R10 |
| 1 | 3.7 Li-ion | custom_footprints:BAT-HLD-001 | BT1 |
| 1 | 4.7u | Capacitors_SMD:C_0603 | C2 |
| 1 | 4k7 | Resistors_SMD:R_0805 | R1 |
| 1 | ADP151AUJZ-3.3-R7 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U1 |
| 1 | DIPS_04 | custom_footprints:SDA04H1BD | SW1 |
| 1 | FERRITEBEAD | Capacitors_SMD:C_0805 | FB1 |
| 1 | FGPMMOPA6H | custom_footprints:GlobalTop-FGPMMOPA6H | U4 |
| 1 | GREEN | LEDs:LED-1206 | D2 |
| 1 | JTAG_PROG | Pin_Headers:Pin_Header_Straight_1x06 | P1 |
| 1 | Led_Small | Capacitors_SMD:C_0805 | D1 |
| 1 | RN-42 | custom_footprints:RovingNetworks_RN-42 | U3 |
| 1 | SW_PUSH | custom_footprints:1571634-1 | SW2 |
| 1 | TM4C123GH6PM | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U2 |
| 1 | UART_PROG | Pin_Headers:Pin_Header_Straight_1x04 | P2 |
| 1 | ULTRA_BACK | Pin_Headers:Pin_Header_Straight_1x04 | P4 |
| 1 | ULTRA_FRONT | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
| 1 | USB-MICRO-B | Connect:USB_Micro-B | CON1 |
The 38 most common of 41 parts.
More from cactorium/UCFBrainStuff
6- 2 layers47.3 × 32.6 mm
Flasher
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
40 partsMIT - 2 layers40.4 × 54.2 mm
Servos
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
22 partsMIT - 2 layers43.4 × 28.8 mm
Flasher
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
20 partsMIT - 2 layers33.7 × 34.9 mm
Voltage regulator
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
14 partsMIT - 2 layers
Noname
cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!
10 partsMIT
Similar boards
- 2 layers44.9 × 47.2 mm
- 6 layers228.6 × 110.7 mm
Driver
thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules
690 parts4MIT - 2 layers65 × 40 mm
Binaural Microphone
CubeEarthWorld/Open-Binaural-Microphone
Open-source design data for the Xignal Bicarus1 binaural microphone
46 parts - 4 layers125 × 50.1 mm
- 4 layers30 × 55 mm
- 4 layers68.6 × 52.1 mm
Roadrunner
jakeson21/Roadrunner-TM4C123G
Arduino clone based on TI's TM4C123G, an ARM M4F running at 80 MHz.
104 parts3GPL-3.0 - 2 layers47 × 48.8 mm
- 2 layers67 × 55 mm
Questions
How big is the Sensors PCB?
It measures 83.5 × 61.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensors use?
41 parts, built around the TM4C123GH6PMI and ADP151AUJZ-3.3-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensors KiCad files?
From the cactorium/UCFBrainStuff repository on GitHub, at the commit this page was made from: the board is seniordesign/sensors/sensors.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensors design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).