
Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter

All of my KiCad projects are stored here.
MediumWaveRadioTransmitter is an open-source printed circuit board by BoBoBaSs84, from the BoBoBaSs84/KiCad.Projects repository on GitHub, published under the MIT licence. It is a 2-layer board with 16 parts on 10 nets, routed with 81 tracks and 0 vias.
It is built around the BC337. Its parts include 8 resistors, 3 capacitors and 2 connectors.
All of my KiCad projects are stored here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9, R10, R11, R12 |
| 3 | 1nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C4, C5, C6 |
| 2 | BC337 | Package_TO_SOT_THT:TO-92 | T3, T4 |
| 1 | 100R | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | P6 |
| 1 | 2k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 33R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 400kH | Crystal:Resonator-2Pin_W8.0mm_H3.5mm | Qz2 |
| 1 | 68R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | WAGO 734-135 | Connector_Wuerth:Wuerth_WR-WTB_64800511622_1x05_P1.50mm_Vertical | J1 |

roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter



leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

lampmerchant/tashtwenty
An interface for the DCD protocol used by Apple's Hard Disk 20.

CTXz/Video-Glitch-Array
A collection of glitch art circuits dedicated to VGA signal manipulation

16 parts, built around the BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BoBoBaSs84/KiCad.Projects repository on GitHub, at the commit this page was made from: the board is MediumWaveRadioTransmitter/MediumWaveRadioTransmitter.kicad_pcb and its schematic MediumWaveRadioTransmitter/MediumWaveRadioTransmitter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).