

Backup r1
- Size
- 99.4 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 42
- Pads
- 172
- Tracks, vias
- 238, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Jun 2019
- Updated
- 27 Jun 2019
Overview
Backup r1 is an open-source printed circuit board by blthree, from the blthree/synth_schematics repository on GitHub. It is a 2-layer board of 99.4 × 78 mm with 66 parts on 42 nets, routed with 238 tracks and 0 vias.
It is built around the TL072 and LTC1044CD. Its parts include 23 resistors, 16 capacitors, 13 connectors, 5 ICs and 1 diode.
Main components
2TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierLTC1044CD
--40℃~+85℃ 1.5V~9V 200uA Level shifting、Short-Circuit Protection Single Supply - Signal Switches, Multiplexers, DecodersTexas InstrumentsSignal Switches, Multiplexers, Decoders
README
README.mdView this project on CADLAB.io.
synth_schematics
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C7, C9, C11, C12, C13, C14 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H4 |
| 4 | PWM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J11, J12, J13 |
| 3 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R2, R12, R13 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C15, C16 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R18, R19 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1, R22 |
| 2 | 10n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C4, C5 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C8, C10 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R5, R6 |
| 2 | 1n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R17, R21 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R4, R7 |
| 2 | 5.6k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R9, R15 |
| 2 | Power | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J7, J9 |
| 1 | 1.8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R10 |
| 1 | 1000p / Mica | Capacitor_THT:C_Axial_L12.0mm_D6.5mm_P15.00mm_Horizontal | C6 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV3 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 18K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R11 |
| 1 | 1V/Oct | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R23 |
| 1 | 220K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R14 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R20 |
| 1 | 51K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R3 |
| 1 | 560k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R8 |
| 1 | 5K | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV2 |
| 1 | 680R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R16 |
| 1 | CEM3340 | Package_DIP:DIP-16_W7.62mm_Socket | U2 |
| 1 | Conn_01x08_Female | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | D_ALT | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | D1 |
| 1 | Expo CV | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Hard Sync | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | LM317_3PinPackage | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U4 |
| 1 | LM337_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U3 |
| 1 | LTC1044 | Package_DIP:DIP-8_W7.62mm_Socket | U5 |
| 1 | Linear FM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | R_POT_TRIM | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV4 |
| 1 | Soft Sync | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Sqr Jump | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
More from blthree/synth_schematics
12- 2 layers81.3 × 99.1 mm

- 2 layers98.3 × 82.3 mm

- 2 layers

- 2 layers49.5 × 99.7 mm

- 2 layers96.8 × 81.5 mm

- 2 layers72.4 × 57.1 mm

- 2 layers39.6 × 99.1 mm

- 2 layers79.4 × 45.6 mm

- 2 layers68.6 × 77.5 mm

- 2 layers59.5 × 48.8 mm

- 2 layers29.8 × 99.7 mm

- 2 layers30 × 86.2 mm

Similar boards
- 2 layers58 × 100 mm

FullBoardChargePumpCapMult
z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:
40 parts7 - 2 layers100 × 100 mm

HF PA Radio Interface
RADARC/Modular-PA-Controller
Controller for High Power RF Power Amplifiers based Raspberry Pi Pico
187 parts - 2 layers160 × 99 mm

- 2 layers

SENS CO analog frontend
souhaib250/SENS-CO-Wearable-Gas-Sensor
Design, simulation and PCB implementation of an embedded wireless acquisition node for a wearable WS2 gas sensor.
6 parts - 2 layers148 × 84.5 mm

Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410 - 2 layers39.6 × 99.1 mm

ESP32-Eurorack Audio
ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module
128 parts260 - 4 layers121.9 × 109.2 mm

Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 2 layers58 × 110 mm

Questions
How big is the Backup r1 PCB?
It measures 99.4 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Backup r1 use?
66 parts, built around the TL072 and LTC1044CD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Backup r1 KiCad files?
From the blthree/synth_schematics repository on GitHub, at the commit this page was made from: the board is cem/backup_r1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Backup r1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask blthree before reusing the design.