LTC1044CD

Texas InstrumentsExtended

-40℃~+85℃ 1.5V~9V 200uA Level shifting、Short-Circuit Protection Single Supply - Signal Switches, Multiplexers, Decoders

Part id: ti/LTC1044CD
Category: Signal Switches, Multiplexers, Decoders
Pins: 8
In stock: 0 at JLCPCB (C3209147)
Used on: 10 open-source boards

Overview

The LTC1044CD is a signal Switches, Multiplexers, Decoder made by Texas Instruments with 8 pins. -40℃~+85℃ 1.5V~9V 200uA Level shifting、Short-Circuit Protection Single Supply - Signal Switches, Multiplexers, Decoders.

PCBKit's library has its KiCad symbol (Regulator_SwitchedCapacitor:LTC1044, from KiCad's library) and its footprint (EasyEDA_Cloud:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C3209147). 10 open-source boards in 5 repositories on GitHub use it.

Symbol

Regulator_SwitchedCapacitor:LTC1044From KiCad's library

Footprint

EasyEDA_Cloud:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BLFrom EasyEDA

Pinout

The pins of the LTC1044CD
Pin	Name	Type
1	BOOST	Input
2	CAP+	Input
3	GND	Power in
4	CAP-	Input
5	VOUT	Power out
6	LV	Input
7	OSC	Input
8	V+	Power in

Parameters

Function: Short-Circuit Protection；Level shifting
Operating temperature: -40℃~+85℃
Quiescent Current: 200uA
Voltage - Supply: 1.5V~9V
Voltage Supply Source: Single Supply

Order codes

LTC1044CDRLCSC C3209147

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/ti/LTC1044CD" title="LTC1044CD in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

10See all 10

2 layers58 × 100 mm
FullBoardChargePumpCapMult
z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:
40 parts7
2 layers100 × 100 mm
HF PA Radio Interface
RADARC/Modular-PA-Controller
Controller for High Power RF Power Amplifiers based Raspberry Pi Pico
187 parts
2 layers160 × 99 mm
TCC Circuito
v206645/Dados-Utilizados-TCC-Sonda-Hall-SOI

56 parts
2 layers99.4 × 78 mm
Backup r1
blthree/synth_schematics

66 parts
2 layers98.3 × 82.3 mm
Cem3340-module
blthree/synth_schematics

84 parts
2 layers78.7 × 84.2 mm
Midi2cv
blthree/synth_schematics

29 parts
2 layers96.8 × 81.5 mm
Noname
blthree/synth_schematics

63 parts
2 layers68.2 × 44.6 mm
Power board
blthree/synth_schematics

25 parts

Parts like it

GX4201-CKA
-Output enable high-impedance、Tri-state output - Signal Switches, Multiplexers, DecodersSEMTECHSignal Switches, Multiplexers, Decoders

Questions

Is there a KiCad symbol and footprint for the LTC1044CD?

Yes. The symbol is Regulator_SwitchedCapacitor:LTC1044 and the footprint EasyEDA_Cloud:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the LTC1044CD datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LTC1044CD?

JLCPCB lists it as part C3209147, with 0 in stock; the sellers' links on this page open their listings.

What can replace the LTC1044CD?

Parts like it in the library: the GX4201-CKA by SEMTECH. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LTC1044CD?

10 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.