
Fx Full125B
z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:

Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:
FullBoardChargePumpCapMult is an open-source printed circuit board by z2amiller, from the z2amiller/pedalfx repository on GitHub. It is a 2-layer board of 58 × 100 mm with 40 parts on 33 nets, routed with 109 tracks and 80 vias.
It is built around the LTC1044CD, AO3401A and BC847C, with the BC857C, GZ2012D601TF and H15VL10B among its other parts. Its parts include 11 capacitors, 7 diodes, 6 resistors, 4 connectors and 3 transistors.
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:
Add clock_3102_cd4047.kicad_sch as a hierarchical sheet wherever a host
schematic shows an MN3102. The 8 sheet pins mirror the MN3102's DIP-8 pins
one-for-one:
| Sheet pin | MN3102 pin | Role |
|---|---|---|
| VDD | 1 | 4–10V supply (feed from the filtered BBD rail) |
| CP1 | 2 | Clock out (4047 Q) |
| GND | 3 | Ground |
| CP2 | 4 | Clock out, antiphase (4047 Q̄) |
| OX3 | 5 | C-drive (4047 pin 1) — timing cap OX3→OX1 |
| OX2 | 6 | R-drive (4047 pin 2) — timing resistor OX2→OX1 |
| OX1 | 7 | RC common / oscillator input (4047 pin 3) |
| VGG_OUT | 8 | 15/16·VDD (≈14/15) for the BBD's VGG pin |
Wire the host's existing timing R, C, and LFO network to OX1/OX2/OX3 exactly as they were wired to the MN3102. Both self-oscillation (R + C) and current-driven hosts (Julia/Caesar/PizzaPizza style: OX2 open, LFO current into OX1) work unchanged. f_CP = 1/(4.4·R·C) at 50% duty.
The root sheet (fx-MN3102DropIn.kicad_sch) adds J1, a DIP-8 machined-pin
header footprint, so the same block can be laid out as a tiny board that plugs
into an existing MN3102 socket.
The DIP-8 pad ring's inner edge is 3.01mm from the board centerline (pads Ø1.6 on 7.62mm rows). Measured pad-field extents (KiCad footprints):
| Package | Pad field half-extent | Fits between rows? |
|---|---|---|
| SOIC-14 (leads across) | 3.45mm | No — overlaps DIP pads by 0.44mm |
| TSSOP-14 rotated 90° (leads along board) | 2.15mm across / 3.60mm along | Yes, ≥0.5mm clear |
Recommended construction: everything on top, bare bottom. Board ~12.7mm long: TSSOP-14 rotated 90° in the middle between the pin rows, two 0603s on each end tongue (~2.5mm overhang past the socket ends). Bare bottom = the board seats flush on the socket, no standoff/height concerns at all.
Overhang clearance, verified against fx-PizzaPizza: nearest on-axis parts are R9/R11 (0603, ~0.8mm tall) 3.4mm past one socket end — the overhang flies ~3.5mm above them at socket-top height; the other end is clear for 8mm+. In general only tall neighbors matter (electrolytics, box film caps, adjacent socketed ICs) — check per host, especially through-hole builds.
Alternate (zero overhang): passives on the underside between the pin rows — then use collared machined-pin strips (≥1.5mm standoff) so back-side parts (≤0.9mm with solder) clear the socket face.
VGG cap note: C2 is optional insurance, not functional — the BBD's VGG pin draws no DC current and many hosts already have a cap on that net (PizzaPizza: C21 22µF). 100nF is plenty (filter corner ~1.7kHz vs 50-200kHz clock); DNP it if space is tight. Lowest-profile alternates, all Basic tier 0402: 1k C11702, 15k C25756, 100nF 50V C307331 (~0.55mm tall).
| Ref | Value | Package | LCSC | Tier |
|---|---|---|---|---|
| U1 | CD4047BPWR (adapter) | TSSOP-14 | C2652491 | Extended |
| R1 | 1k | 0603 | C21190 | Basic |
| R2 | 15k | 0603 | C22809 | Basic |
| C1 | 100n | 0603 | C14663 | Basic |
| C2 | 100n (optional) | 0603 | C14663 | Basic |
U1 sourcing reality (live-checked 2026-08-08): the TSSOP-14 CD4047BPWR is out of stock at JLC/LCSC (global-sourcing/notify-me only), but Mouser/DigiKey stock it (~$0.30-0.60). Adapter plan: have JLC assemble the four Basic passives, hand-stencil the TSSOP at home. For in-design use (full pedal board, no size constraint), swap U1's footprint to SOIC-14 and use CD4047BM96, LCSC C46538 (35k+ stock) for normal JLC assembly.
Do not substitute 74HC4047 (6V max). CD4047B/HEF4047B only. Timing cap in the host must be C0G/NP0.
Full design rationale, datasheet references, and caveats (clock cross-point,
drive limits for 4096-stage BBDs): ~/Claude/cd4047-mn3102-clock-reference.md.
Verification: ERC 0/0, netlist checked against golden connectivity map
(kicad-cli 10.0.4).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10u | Capacitor_SMD:C_1206_3216Metric | C102, C103, C105, C106, C107, C109, C111 |
| 7 | TestPoint_Flag | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP101, TP102, TP103, TP104, TP105, TP106, TP107 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R104, R105, R106 |
| 2 | 1.2K | Resistor_SMD:R_0603_1608Metric | R101, R102 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C101, C110 |
| 2 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C104, C108 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D103, D104 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R107 |
| 1 | 10V | Diode_SMD:D_SOD-123F | D101 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q101 |
| 1 | BC847C | Package_TO_SOT_SMD:SOT-23 | Q102 |
| 1 | BC857C | Package_TO_SOT_SMD:SOT-23 | Q103 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J101 |
| 1 | GZ2012D601TF | Inductor_SMD:L_0805_2012Metric | L101 |
| 1 | H15VL10B | Diode_SMD:D_SOD-882 | D107 |
| 1 | H5VU10BB | Diode_SMD:D_SOD-882 | D106 |
| 1 | Input | Effects_Footprints:Neutrik_NMJ6HCD2 | J102 |
| 1 | LED | LED_THT:LED_D5.0mm | D102 |
| 1 | LTC1044 | Package_SO:JEITA_SOIC-8_3.9x4.9mm_P1.27mm | U101 |
| 1 | Output | Effects_Footprints:Neutrik_NMJ6HCD2 | J103 |
| 1 | Power | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J104 |
| 1 | SMF24A | Diode_SMD:D_SMF | D105 |

z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:

z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:

z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:

z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:

z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:

z2amiller/pedalfx
Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:





GuavTek/M2IDI_TANGLE_HW
A multiplexer module for the M2IDI system

samba09/camper-pir-switch
PIR motion switch for Revotion NODE Ambient (AM312, PhotoMOS, KiCad)


Benv-B/photo-frame-hardware
Open hardware carrier for an AirDrop ChLCD color e-paper frame: XIAO ESP32-C5, NFC wake, KiCad, schematic, BOM and Gerbers. CERN-OHL-P-2.0.
It measures 58 × 100 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the LTC1044CD, AO3401A, BC847C and BC857C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the z2amiller/pedalfx repository on GitHub, at the commit this page was made from: the board is template/FullBoardChargePumpCapMult/FullBoardChargePumpCapMult.kicad_pcb and its schematic mn3102-dropin/clock_3102_cd4047.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask z2amiller before reusing the design.