Skip to the content
2 layers28 × 48.3 mmPenguin32, the printed circuit board in 3D

a esp32s3 devboard submitted to outpost by hackclub

Size
28 × 48.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
63
Pads
194
Tracks, vias
738, 94
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Jul 2026
Updated
27 Sep 2026

Overview

Penguin32 is an open-source printed circuit board by amnotpopichu, from the amnotpopichu/penguin32 repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 28 × 48.3 mm with 42 parts on 63 nets, routed with 738 tracks and 94 vias.

It is built around the ESP32-S3FN8, YZA-056-4.3 and AMS1117-3.3, with the H5VU10BB, GJM1555C1H1R5BB01D and SDCL1005C2N0STDF among its other parts. Its parts include 19 capacitors, 5 resistors, 5 ICs, 4 inductors and 2 diodes. It belongs with the microcontroller boards boards and the ESP32 boards of this library.

Main components

12

README

README.md

penguin32

Penguin32 is a esp32 devboard developed on the esp32 s3fn8 board but with a big penguin on it. why penguin? why not? the main goal here was to develop and learn bare chip work

Firmware + CAD

N/A, all the necessary programs are preflashed onto the s3 chip. Also no cad for obvious reasons, its just a devboard

Images

Not sure why some of the models dont actaully render, and some are upside down, so forgive the pcb looking kinda odd. image name image name image name image name image name

Notes

flash not needed thanks to the onboard flash. this is my first time doing bare chip development so im pretty happy with how it turned out given i did it in about 3 days to attempt to qualify for outpost. Honestly i can't believe some of the stuff (routing) took me so long, but i guess i finished at the end of the day so its fine. Also i have two seperate BOMs, a regular BOM, and then a BOM for specific pick and place components. Also i had to use 5 pcba instead of 2, because otherwise it would have made do standard pcba -- which is more expenisve. gsdl doesnt work because jlc doesn't allow it over a certain price.

Line ItemAmount (USD)
MERCHANDISE TOTAL65.78
SHIPPING CHARGE42.78
Customs duties & taxes17.78
DISCOUNT-15.00
SALES TAX4.90
ORDER TOTAL116.24

Parts

42
QtyValueFootprintReferences
5CL05B104KO5NNNCeasyeda2kicad:C0402C2, C3, C4, C5, C8
4CL10A105KB8NNNCeasyeda2kicad:C0603C10, C11, C13, C16
4CL10A106MA8NRNCeasyeda2kicad:C0603C1, C17, C18, C19
4GJM1555C1H1R5BB01Deasyeda2kicad:C0402C20, C21, C22, C23
3SDCL1005C2N0STDFeasyeda2kicad:L0402L1, L2, L4
20402CG220J500NTeasyeda2kicad:C0402C14, C15
20603WAF5101T5Eeasyeda2kicad:R0603R1, R3
20805W8F1002T5Eeasyeda2kicad:R0805R4, R5
2Conn_01x15_PinConnector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ4, J5
2LOGOLOGOG***, G***
2YZA-056-4.3easyeda2kicad:SW-SMD_4P-L4.5-W4.5-P3.00-LS6.8U3, U4
10402WGF4990TCEeasyeda2kicad:R0402R2
11N5819WSeasyeda2kicad:SOD-323_L1.8-W1.3-LS2.5-RDD4
1AMS1117-3.3easyeda2kicad:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BRU1
1Antenna_Chipesp32 antenna:ESPRESSIF_ESP32_MIFA_2.4GHz_RightAE2
1ESP32-S3easyeda2kicad:QFN-56_L7.0-W7.0-P0.40-TL-EP4.0U5
1H5VU10BBeasyeda2kicad:DFN1006-2L-BIU2
1SDCL1005C24NJTDFeasyeda2kicad:L0402-RDL3
1SMBJ3.3A_C19077556easyeda2kicad:SMB_L4.6-W3.6-LS5.3-RDD3
1TXM40M0004322HBCEO00Teasyeda2kicad:CRYSTAL-SMD_4P-L3.2-W2.5-BL-2X1
1TYPE-C-31-M-12easyeda2kicad:USB-C_SMD-TYPE-C-31-M-12_1USBC1

Similar boards

  • 2 layers97.8 × 17.8 mmRtl8762ckf dev board, the printed circuit board in 3D

    Rtl8762ckf dev board

    simplexion/rtl8762c-dev-board

    RTL8762C Development Board

    140 parts2CERN-OHL-P-2.0
  • 2 layers58 × 100 mmFullBoardChargePumpCapMult, the printed circuit board in 3D

    FullBoardChargePumpCapMult

    z2amiller/pedalfx

    Replaces the Panasonic MN3102 (clock generator for MN3204/05/07/08/09 BBDs) with a CD4047B plus four passives. Two ways to use it:

    40 parts7
  • 4 layers28.3 × 30.8 mmGnss px100-18mm hv, the printed circuit board in 3D

    Gnss px100-18mm hv

    Tinkerbug-Robotics/TinkerRocket

    Model rocket flight computer, ground station, iOS app, and simulation

    85 parts1GPL-3.0
  • 4 layers160 × 100 mmEsp32 s3 dwm3000 uwb anchor with relay outputs, the printed circuit board in 3D

    Esp32 s3 dwm3000 uwb anchor with relay outputs

    Takingo/Mypcb35

    OmniCircuit AI is a local proof of concept for an autonomous PCB/PCBA design and manufacturing suite. The current implementation focuses on the ESP32-S3 + DWM3000 UWB Anchor example and establishes the architecture for:

    323 parts
  • 2 layers52.6 × 48.8 mmDwm1001-devboard, the printed circuit board in 3D

    Dwm1001-devboard

    panovvv/dwm1001-devboard

    Breakout board for DWM1001 UWB module.

    39 parts5MIT
  • 4 layers37.1 × 41 mmServoLess, the printed circuit board in 3D

    ServoLess

    Aiano/ServoLess

    Wireless and brushless DC Servo.

    98 parts2
  • 4 layers67.6 × 56.9 mmSensor pcb, the printed circuit board in 3D

    Sensor pcb

    Nautilus-UUV/sensor_pcb

    113 parts
  • 2 layers85 × 84 mmTTC LoRa, the printed circuit board in 3D

    TTC LoRa

    PARTH-KAKIRDE/CUBESAT

    Radio (communications) module for the 2U CubeSat, LoRa version, Rev A.

    81 partsMIT

Questions

How big is the Penguin32 PCB?

It measures 28 × 48.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Penguin32 use?

42 parts, built around the ESP32-S3FN8, YZA-056-4.3, AMS1117-3.3 and H5VU10BB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Penguin32 KiCad files?

From the amnotpopichu/penguin32 repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Penguin32 design in my own project?

Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).