
Explorer
anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

An open source, cross-platform, easy-to-use satellite automatic tracking system with hardware & software solutions.
Gnss is an open-source printed circuit board by bclswl0827, from the bclswl0827/openstation repository on GitHub. It is a 2-layer board of 100 × 50 mm with 42 parts on 42 nets, routed with 165 tracks and 5 vias.
It is built around the MAX3485ED, RS485 and 74HC14, with the AMS1117-3.3 and SS34 among its other parts. Its parts include 11 resistors, 10 capacitors, 6 diodes, 4 ICs and 4 connectors. It belongs with the radio and wireless boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C4, C5, C6, C10 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R4, R6 |
| 4 | LED | LED_THT:LED_D3.0mm | D1, D4, D5, D6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 0 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R7, R8 |
| 3 | 100pF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C3, C8, C9 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R9, R11 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C7 |
| 2 | SMA | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J2, J3 |
| 2 | SS34 | Diode_SMD:D_SMA | D2, D3 |
| 1 | 120 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10 |
| 1 | 20uH | Inductor_THT:L_Radial_D7.0mm_P3.00mm | L1 |
| 1 | 3V | Battery:BatteryHolder_LINX_BAT-HLD-012-SMT | BT1 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LC02H | GNSS:LC02H | U2 |
| 1 | LOGO | GNSS:Cat | G*** |
| 1 | MAX3485 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | POWER | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | RS485 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |

anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.

NGOQUOC98/ESP32_MODBUS_PCB_MASTER
This project was in development phase - we will remove this remark after release


saikoushiknalubola/firedamp-fd1
FD-1 is a wellhead node for coal mine methane drainage boreholes. It measures gas purity (NDIR CH4 and electrochemical O2), flow (ISO 5167 orifice + differential pressure) and line pressure at each borehole, throttles…



fraxinas/DoorBirdPico
A custom Raspberry Pi Pico PCB design and code to add functionality to the DoorBird Voip entryphone.

austinscreations/Oxrs-Black
a custom rack controller that is based of the rack32 but includes some upgrades and major changes
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the MAX3485ED, RS485, 74HC14 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bclswl0827/openstation repository on GitHub, at the commit this page was made from: the board is drivers/gnss/hardware/pcb/pcb.kicad_pcb and its schematic drivers/gnss/hardware/pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bclswl0827 before reusing the design.