

DoorBirdPico
A custom Raspberry Pi Pico PCB design and code to add functionality to the DoorBird Voip entryphone.
- Size
- 62 × 73.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 59
- Pads
- 246
- Tracks, vias
- 294, 26
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 May 2021
- Updated
- 24 Aug 2021
Overview
DoorBirdPico is an open-source printed circuit board by fraxinas, from the fraxinas/DoorBirdPico repository on GitHub. It is a 2-layer board of 62 × 73.7 mm with 42 parts on 59 nets, routed with 294 tracks and 26 vias.
It is built around the MAX3485ED, RS485 and 1N4148WS, with the AO3400A and AO3401A among its other parts. Its parts include 20 resistors, 10 connectors, 5 capacitors, 2 ICs and 2 transistors. It belongs with the RP2040 boards of this library.
Main components
5MAX3485ED
SOP-8-40℃~+85℃ 1 1 10Mbps 1mA 3.135V~3.465V 32 Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTC Korea TAEJIN TechRS-485 / RS-422 ICsRS485
SOP-81 1 1.2mA 2.5Mbps 256 5V Half-Duplex Transceiver ±4kV SOP-8 RS-485 / RS-422 ICs ROHSGRRS-485 / RS-422 ICs1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdDoorBirdPico
(CC) 2021 by Andreas Frisch fraxinas@purplegecko.de
OwO what's this?
DoorBirdPico is a custom Raspberry Pi Pico PCB design and code to add functionality to the DoorBird Voip entryphone.
Hardware Features
- ports for 3 RGB-lit doorbell buttons
- ports for 2 reed sensors (door/letterbox)
- hardware debouncing
- power / UART communication with Doorbird D2100E
- 2 input ports for the Doorbird relays
- 1 potential-free relay output (for door opener)
- RS485 transceiver
Software
- using Rasperry Pi Pico C API
- interrupt services routines for buttons
- color-fading PWM
Project Diary
| Date | Version | Milestone |
|---|---|---|
| 2021-04-06 | Pico on Breadboard, pushbutton irq & pwm | |
| 2021-04-13 | Implemented UART communication with Doorbird | |
| 2021-04-16 | Started git repository | |
| 2021-05-12 | v0.1 | Commission of 1st prototype PCB with aisler.net |
| 2021-06-02 | v0.1 | Received prototype PCB |
| 2021-06-04 | v0.1 | Assembling of prototype PCB |
| 2021-06-06 | v0.2 | Software is essentially ready |
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R20, R30, R41, R42 |
| 5 | 22nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C10, C20, C30 |
| 4 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4, R5 |
| 3 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R21, R31 |
| 3 | 68R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R22, R32 |
| 3 | 82R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R23, R33 |
| 2 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J98, J99 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R40 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Doorbird | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J0 |
| 1 | G5V-1 | Relay_THT:Relay_SPDT_Omron_G5V-1 | K1 |
| 1 | MAX3485 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U40 |
| 1 | PICO_RP2040 | lib_includes:RPi_Pico_SMD_TH | U1 |
| 1 | RS485 | footprints:250-202 | J40 |
| 1 | Reed | footprints:250-204 | J1 |
| 1 | Relais_in | footprints:250-204 | J4 |
| 1 | Relay_Opener | footprints:250-202 | J3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW0 |
| 1 | Taste A | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J10 |
| 1 | Taste B | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J20 |
| 1 | Taste C | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J30 |
Similar boards
- 2 layers90 × 48.9 mm

- 4 layers67.4 × 67.4 mm

SCLF Gripper
Tknika-SCLF/sclf-gripper
Deskargatu eta instalatu Antigravity bere webgune ofizialetik. VSCode/Windsurf-en fork bat da eta modu berean funtzionatzen du.
78 parts1 - 4 layers45 × 60 mm

- 4 layers140 × 100 mm

Dc usv
TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages
351 parts223CERN-OHL-P-2.0 - 4 layers118 × 117 mm

Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 4 layers55 × 100.5 mm

OSS Radio Hardware Design
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.
256 parts72 - 4 layers115.5 × 96.2 mm

Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19 - 2 layers40 × 20 mm

Questions
How big is the DoorBirdPico PCB?
It measures 62 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DoorBirdPico use?
42 parts, built around the MAX3485ED, RS485, 1N4148WS and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DoorBirdPico KiCad files?
From the fraxinas/DoorBirdPico repository on GitHub, at the commit this page was made from: the board is hardware/DoorBirdPico.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DoorBirdPico design in my own project?
Its repository states no licence, so its author keeps all rights: ask fraxinas before reusing the design.