

TurningLoopMosfet
- Size
- 54 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 22
- Pads
- 119
- Tracks, vias
- 220, 28
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
TurningLoopMosfet is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 54 × 33 mm with 38 parts on 22 nets, routed with 220 tracks and 28 vias.
It is built around the 1N4148WS, MDD50N03D and MB10S. Its parts include 9 diodes, 9 transistors, 7 capacitors, 7 resistors and 3 connectors.
Main components
31N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesMDD50N03D
TO-252-50℃~+150℃ 1 N-channel 1.015nF 1.5V 164pF 201pF 23.6nC 28W 30V 50A 6.5mΩ@10V、8.3mΩ@4.5V TO-252 MOSFETs ROHSMDDMOSFETsMB10S
MBS-55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4148WS | Diode_SMD:D_SOD-323 | D201, D202, D301, D302, D401, D402, D501, D502 |
| 8 | MDD50N03D | Package_TO_SOT_SMD:TO-252-2 | Q201, Q202, Q301, Q302, Q401, Q402, Q501, Q502 |
| 4 | 100R | custom_kicad_lib_sk:R_0603_smalltext | R201, R301, R401, R501 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C201, C301, C401, C501 |
| 2 | 22k | custom_kicad_lib_sk:R_0603_smalltext | R101, R102 |
| 2 | Screw_Terminal_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J101, J102 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C602 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C603 |
| 1 | 2k2 | custom_kicad_lib_sk:R_0603_smalltext | R103 |
| 1 | 330nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C601 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J103 |
| 1 | L78L12_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U601 |
| 1 | MB10S | Package_TO_SOT_SMD:TO-269AA | D601 |
| 1 | NPN_TOR | Package_TO_SOT_SMD:SOT-23 | Q101 |
The 36 most common of 38 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 4 layers89 × 38 mm

HotPlate
Markuselectronics/DIY-USB-C-Reflow-Hotplate
A compact, open-source DIY Reflow Hotplate powered by USB-C PD and STM32. Features a custom aluminum PCB heater, OLED display, and PID temperature control for portable SMD soldering.
82 parts7 - 8 layers118 × 100 mm

Kria k26-devboard
antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard
660 parts83Apache-2.0 - 6 layers100 × 70 mm

Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0 - 4 layers66.6 × 86.6 mm

DPSin Board WiFi Triac
gmeirelles-ops/esp32-DPTri
Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR.
62 parts1 - 6 layers180 × 110 mm

Reflow station
atwardzik/reflow_station_pcb
This project is currently in a prototype stage. It features PCB project of basic reflow station utilizing 4 phase-controlled triacs steering with attached heaters.
267 parts - 2 layers36.6 × 63.6 mm

- 2 layers68.6 × 53.3 mm

- 4 layers128.5 × 40 mm

Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0
Questions
How big is the TurningLoopMosfet PCB?
It measures 54 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TurningLoopMosfet use?
38 parts, built around the 1N4148WS, MDD50N03D and MB10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TurningLoopMosfet KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/analog_solutions/turningLoopModules/turningLoopMosfet/turningLoopMosfet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TurningLoopMosfet design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.