
RelayTrackerController
- Size
- 54 × 94.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 76
- Pads
- 284
- Tracks, vias
- 330, 68
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
RelayTrackerController is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 54 × 94.5 mm with 90 parts on 76 nets, routed with 330 tracks and 68 vias.
It is built around the ATMEGA328-AU, MT2499A and EL814, with the 24LC256-I/P, LM311 and SS53 among its other parts. Its parts include 27 resistors, 19 diodes, 12 capacitors, 9 transistors and 7 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MT2499A
ESOP-8-40℃~+85℃ 1 3.5A 340kHz 4.5V~21V 400uA Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type Yes ESOP-8 DC-DC Converters ROHSXI'AN Aerosemi TechDC-DC ConvertersEL814
DIP-4-55℃~+110℃ 1.2V 11us 20% 200mW 300% 50mV@20mA,1mA 5kV 60mA 7us@2mA,100Ω 80V AC,DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output Optoisolators24LC256-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROMLM311
SOP-80℃~+70℃ 1 1.7nA 2.4mA 200ns 2mV 36V 45nA 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHSGcoreComparatorsSS53
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100A 200uA@30V 30V 550mV@5A 5A SMA(DO-214AC) Schottky Diodes ROHSDIYI Elec TechSchottky Barrier Diodes (SBD)1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SS53 | Diode_SMD:D_SMA | D101, D102, D103, D104, D303, D304, D305, D306, D503, D504, D505, D506 |
| 5 | 1k | custom_kicad_lib_sk:R_0603_smalltext | R302, R506, R605, R802, R806 |
| 5 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D201, D301, D307, D501, D507 |
| 5 | NPN_TOR | Package_TO_SOT_SMD:SOT-23 | Q301, Q507, Q601, Q801, Q806 |
| 4 | 100nF | Capacitor_SMD:C_0402_1005Metric | C202, C601, C902, C906 |
| 4 | 3k3 | custom_kicad_lib_sk:R_0603_smalltext | R301, R304, R505, R508 |
| 3 | 10k | custom_kicad_lib_sk:R_0603_smalltext | R603, R803, R804 |
| 3 | 22uF | Capacitor_SMD:C_0603_1608Metric | C901, C904, C905 |
| 3 | SW_Push | custom_kicad_lib_sk:tactile_SMD_6mm | SW201, SW301, SW501 |
| 2 | 0R1 | Resistor_SMD:R_1206_3216Metric | R807, R808 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C201, C203 |
| 2 | 15k | custom_kicad_lib_sk:R_0603_smalltext | R801, R805 |
| 2 | 1N4148WS | Diode_SMD:D_SOD-323 | D302, D502 |
| 2 | 47R | custom_kicad_lib_sk:R_0603_smalltext | R303, R507 |
| 2 | EL814 | Package_DIP:SMDIP-4_W9.53mm | U301, U501 |
| 2 | G6K-2F-Y-TR DC12 | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K301, K501 |
| 2 | N-channel | Package_TO_SOT_SMD:SOT-23 | Q803, Q805 |
| 2 | P-channel | Package_TO_SOT_SMD:SOT-23 | Q802, Q804 |
| 2 | RJ12 | custom_kicad_lib_sk:RJ12 | J601, J1201 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C802 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C801 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R202 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R903 |
| 1 | 150k | custom_kicad_lib_sk:R_0603_smalltext | R602 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R902 |
| 1 | 220k | custom_kicad_lib_sk:R_0603_smalltext | R606 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R901 |
| 1 | 22k | custom_kicad_lib_sk:R_0603_smalltext | R604 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C903 |
| 1 | 24LC256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U801 |
| 1 | 47k | custom_kicad_lib_sk:R_0603_smalltext | R601 |
| 1 | 6k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201 |
| 1 | ATmega328-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U202 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J403 |
| 1 | Crystal_GND2 | custom_kicad_lib_sk:crystal_arduino | Y201 |
| 1 | HEADER_3x2 | Connector_PinSocket_1.27mm:PinSocket_2x03_P1.27mm_Vertical | U201 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J901 |
| 1 | L | Inductor_SMD:L_Bourns-SRN8040_8x8.15mm | L901 |
| 1 | LM311 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U601 |
| 1 | MT2499A | Package_SO:TI_SO-PowerPAD-8 | U901 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J101 |
The 86 most common of 90 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers100 × 45 mm

- 2 layers81 × 71.5 mm

Similar boards
- 2 layers54.5 × 73 mm

OS servo decoder-8
Open-Source-Model-Railway-Electronics/OS-Servo-Decoder
The OS-Servo-Decoder is a simple and robust DCC accessory decoder designed for driving up to 8 servo motors. It supports modern model railroads with flexible configuration options, external relay modules for polarity…
79 parts - 2 layers15 × 18 mm

Inverting buck boost
flaviut/5v-inverting-buck
Design for an inverting 5V buck-boost regulator based on the MT2499A, with performance data
12 parts - 2 layers

- 2 layers

- 2 layers

- 2 layers96.8 × 81.5 mm

- 2 layers91.8 × 23.6 mm

- 2 layers85.1 × 85.1 mm

Questions
How big is the RelayTrackerController PCB?
It measures 54 × 94.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RelayTrackerController use?
90 parts, built around the ATMEGA328-AU, MT2499A, EL814 and 24LC256-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RelayTrackerController KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/relayTrackerController/relayTrackerController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RelayTrackerController design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.