Skip to the content
2 layersOutletcontroller, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
27
Pads
118
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
31 Jul 2019
Updated
31 Jul 2019

Overview

Outletcontroller is an open-source printed circuit board by davidsemporiumofwonders, from the davidsemporiumofwonders/power-socket-controller repository on GitHub. It is a 2-layer board with 35 parts on 27 nets.

It is built around the ATMEGA88-20AU, EL814 and MOC3051M, with the MMBT3906 among its other parts. Its parts include 13 resistors, 7 connectors, 5 capacitors, 4 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

Parts

35
QtyValueFootprintReferences
6Conn_01x01Connector:spade_4.8mmJ1, J3, J4, J5, J6, J7
415kResistor_SMD:R_1206_3216MetricR9, R10, R11, R12
3100kResistor_SMD:R_1206_3216MetricR1, R2, R3
3100nCapacitor_SMD:C_0805_2012MetricC3, C4, C5
2330Resistor_SMD:R_0603_1608MetricR7, R8
2MMBT3906Package_TO_SOT_SMD:SOT-23Q1, Q2
10.47uCapacitor_THT:C_Axial_L17.0mm_D6.5mm_P20.00mm_HorizontalC1
1100Resistor_SMD:R_0603_1608MetricR6
1110kResistor_SMD:R_0603_1608MetricR5
11n4148Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mmD2
120kResistor_SMD:R_0603_1608MetricR13
1220uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2
12k2Resistor_SMD:R_0603_1608MetricR4
1ATmega88-20AUPackage_QFP:TQFP-32_7x7mm_P0.8mmU2
1Bridge_12ac_3+_4-Package_SO:SOP-4_3.8x4.1mm_P2.54mmU1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1EL814Package_DIP:DIP-4_W7.62mmU4
1FuseFuses2:Fuseholder5x20_horiz_open_inline_Type-IF1
1MOC3051MPackage_DIP:DIP-6_W7.62mmU3
1Q_SCR_AKGPackage_TO_SOT_THT:TO-220-3_Horizontal_TabUpD3
1Zener_5vDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1

Similar boards

  • 2 layers171.5 × 81.3 mmNanoSpotWelder-3, the printed circuit board in 3D

    NanoSpotWelder-3

    bt-soft/NanoSpotWelder-3

    Pulse counter spot welder with ATmega32P microprocessor

    74 parts6Apache-2.0
  • 2 layersHome, the printed circuit board in 3D

    Home

    ellectra2025-arch/PCB306

    46 parts
  • 2 layers96.8 × 81.5 mmSmaller, the printed circuit board in 3D

    Smaller

    Victor-Barros/Shuntimetro_pcb

    35 parts
  • 2 layers91.8 × 23.6 mmAdapter, the printed circuit board in 3D

    Adapter

    s-kanaev/kicads

    10 parts
  • 2 layers85.1 × 85.1 mmBMS LV ADDON, the printed circuit board in 3D

    BMS LV ADDON

    sakshamgupta2004/VegapodAll

    All the vegapod material

    86 parts
  • 2 layers100 × 100 mmCuptorul, the printed circuit board in 3D

    Cuptorul

    kelogs/awreflow3

    Andy's Workshop reflow oven (awreflow2)

    59 parts2MIT
  • 2 layers54 × 34 mmAtmel, the printed circuit board in 3D

    Atmel

    mehmetkara7/Atmega88-20A

    22 parts1

Questions

What parts does the Outletcontroller use?

35 parts, built around the ATMEGA88-20AU, EL814, MOC3051M and MMBT3906. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Outletcontroller KiCad files?

From the davidsemporiumofwonders/power-socket-controller repository on GitHub, at the commit this page was made from: the board is outletcontroller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Outletcontroller design in my own project?

Its repository states no licence, so its author keeps all rights: ask davidsemporiumofwonders before reusing the design.