

SolenoidDecoder
- Size
- 54.5 × 73 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 134
- Nets
- 71
- Pads
- 311
- Tracks, vias
- 1,005, 272
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
SolenoidDecoder is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 54.5 × 73 mm with 134 parts on 71 nets, routed with 1,005 tracks and 272 vias.
It is built around the ATMEGA328-AU, AO3400A and SS34, with the SS53 and MB10S among its other parts. Its parts include 44 resistors, 24 diodes, 16 transistors, 10 connectors and 8 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesSS53
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100A 200uA@30V 30V 550mV@5A 5A SMA(DO-214AC) Schottky Diodes ROHSDIYI Elec TechSchottky Barrier Diodes (SBD)MB10S
MBS-55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
Parts
134| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | TestPoint | custom_kicad_lib_sk:pogoTestPad | TP1, TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 +4 |
| 16 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R23, R24, R33, R34, R43, R44, R53, R54, R63, R64, R73, R74, R83, R84 |
| 16 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12, R21, R22, R31, R32, R41, R42, R51, R52, R61, R62, R71, R72, R81, R82 |
| 16 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q11, Q12, Q21, Q22, Q31, Q32, Q41, Q42, Q51, Q52, Q61, Q62, Q71, Q72, Q81, Q82 |
| 8 | SS34 | Diode_SMD:D_SMA | D11, D21, D31, D41, D51, D61, D71, D81 |
| 8 | ~ | Diode_SMD:D_SMA | D12, D22, D32, D42, D52, D62, D72, D82 |
| 8 | ~ | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal | J11, J21, J31, J41, J51, J61, J71, J81 |
| 4 | 0R1 | Resistor_SMD:R_1206_3216Metric | R101, R102, R103, R104 |
| 4 | 10k | custom_kicad_lib_sk:R_0603_smalltext | R1, R3, R4, R502 |
| 4 | SS53 | Diode_SMD:D_SMA | D501, D502, D503, D504 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C302, C501 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C101 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D4 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C303 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 1k5 | custom_kicad_lib_sk:R_0603_smalltext | R5 |
| 1 | 330nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C301 |
| 1 | 47k | custom_kicad_lib_sk:R_0603_smalltext | R501 |
| 1 | 6N137 | Package_SO:SOP-8_6.62x9.15mm_P2.54mm | U3 |
| 1 | 6k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | ATmega328-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Crystal_GND2 | custom_kicad_lib_sk:crystal_arduino | Y1 |
| 1 | D | Diode_SMD:D_SOD-323 | D1 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U301 |
| 1 | LOGO | custom_kicad_lib_sk:OSSD_QR | G*** |
| 1 | LOGO | custom_kicad_lib_sk:Train-Science logo small | G*** |
| 1 | MB10S | Package_TO_SOT_SMD:TO-269AA | D301 |
| 1 | SW_SPST | custom_kicad_lib_sk:tactile_SMD_6mm | SW1 |
| 1 | Screw_Terminal_01x04 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J62 |
The 129 most common of 134 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

- 2 layers81 × 71.5 mm

Similar boards
- 2 layers54.5 × 73 mm

OS servo decoder-8
Open-Source-Model-Railway-Electronics/OS-Servo-Decoder
The OS-Servo-Decoder is a simple and robust DCC accessory decoder designed for driving up to 8 servo motors. It supports modern model railroads with flexible configuration options, external relay modules for polarity…
79 parts - 2 layers120.4 × 85.7 mm

ESPrinkler Retic PCB
slippery-carrot/ESPrinkler-Retic-Controller
8-Zone reticulation controller based on ESPHome for Home Assistant
142 parts6GPL-3.0 - 4 layers100 × 75 mm

Freedo radio
CappyT/freedo
Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on
135 parts33Apache-2.0 - 2 layers40 × 30 mm

- 4 layers170 × 90 mm

- 2 layers140 × 64 mm

Thermostat v3
Connicpu/thermostat
DIY Zigbee thermostat (ESP32-C6) with day/night schedule and a Home Assistant Lovelace card
101 partsMIT - 4 layers160 × 100 mm

Mastertemp esp32
ryanbjohnson/PentairMasterTempESP32
This folder is the KiCad project area for the MasterTemp 125 ESP32 interface board.
95 partsMIT - 2 layers21 × 100 mm

Questions
How big is the SolenoidDecoder PCB?
It measures 54.5 × 73 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SolenoidDecoder use?
134 parts, built around the ATMEGA328-AU, AO3400A, SS34 and SS53. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SolenoidDecoder KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/DECODERS_N_OCCUPANCY/OSSD/src/PCB/OSSD/solenoidDecoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SolenoidDecoder design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.