

ServoFrogSwitches
- Size
- 55.5 × 48.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 33
- Pads
- 101
- Tracks, vias
- 284, 147
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
ServoFrogSwitches is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 55.5 × 48.5 mm with 33 parts on 33 nets, routed with 284 tracks and 147 vias.
It is built around the ATTINY1616-MN, EL814 and AMS1117-5.0, with the MB10S among its other parts. Its parts include 8 resistors, 5 capacitors, 4 ICs, 4 connectors and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATTINY1616-MN
QFN-20-EP(3x3)-40℃~+105℃ 1.8V~5.5V 10bit 16KB 18 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH QFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)EL814
DIP-4-55℃~+110℃ 1.2V 11us 20% 200mW 300% 50mV@20mA,1mA 5kV 60mA 7us@2mA,100Ω 80V AC,DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output OptoisolatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMB10S
MBS-55℃~+150℃ 1.1V@400mA 1A 1kV 35A 5uA@1kV Single-Phase Rectifier MBS Bridge Rectifiers ROHSMDDBridge Rectifiers
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C402, C404 |
| 2 | 10k | custom_kicad_lib_sk:R_0603_smalltext | R201, R601 |
| 2 | 1k5 | custom_kicad_lib_sk:R_0603_smalltext | R501, R502 |
| 2 | 680R | custom_kicad_lib_sk:R_0603_smalltext | R202, R203 |
| 2 | EL814 | Package_DIP:SMDIP-4_W7.62mm | U501, U502 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D201, D202 |
| 2 | SW_SPDT | custom_kicad_lib_sk:microswitch | SW501, SW502 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP401, JP402 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C201 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | C403 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R302 |
| 1 | 26k | Resistor_SMD:R_0402_1005Metric | R301 |
| 1 | 47uF | Capacitor_SMD:C_1206_3216Metric | C401 |
| 1 | 6mm_tactile | Button_Switch_THT:SW_PUSH_6mm | SW701 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U401 |
| 1 | ATtiny1616-M | custom_kicad_lib_sk:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U201 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J601 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J201 |
| 1 | LOGO | custom_kicad_lib_sk:Train-Science logo small | G*** |
| 1 | MB10S | Package_TO_SOT_SMD:TO-269AA | D401 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J701 |
| 1 | Screw_Terminal_01x05 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal | J401 |
The 30 most common of 33 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers92.6 × 87.9 mm

- 2 layers

- 2 layers

- 2 layers96.8 × 81.5 mm

- 2 layers91.8 × 23.6 mm

- 4 layers128.5 × 40 mm

Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0 - 8 layers118 × 100 mm

Kria k26-devboard
antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard
660 parts83Apache-2.0 - 6 layers100 × 70 mm

Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0
Questions
How big is the ServoFrogSwitches PCB?
It measures 55.5 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ServoFrogSwitches use?
33 parts, built around the ATTINY1616-MN, EL814, AMS1117-5.0 and MB10S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ServoFrogSwitches KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/servoFrogSwitches/servoFrogSwitches.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ServoFrogSwitches design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.