
RelayTracker
- Size
- 41.5 × 94.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 84
- Pads
- 240
- Tracks, vias
- 631, 132
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
RelayTracker is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 41.5 × 94.5 mm with 78 parts on 84 nets, routed with 631 tracks and 132 vias.
It is built around the ATMEGA328-AU, EL814 and SS53, with the 1N4148WS among its other parts. Its parts include 29 diodes, 18 resistors, 8 switches, 6 ICs and 4 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)EL814
DIP-4-55℃~+110℃ 1.2V 11us 20% 200mW 300% 50mV@20mA,1mA 5kV 60mA 7us@2mA,100Ω 80V AC,DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSEverlight ElectronicsTransistor, Photovoltaic Output OptoisolatorsSS53
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100A 200uA@30V 30V 550mV@5A 5A SMA(DO-214AC) Schottky Diodes ROHSDIYI Elec TechSchottky Barrier Diodes (SBD)1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SS53 | Diode_SMD:D_SMA | D303, D304, D305, D306, D503, D504, D505, D506, D603, D604, D605, D606, D703, D704, D705, D706 |
| 9 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D201, D301, D307, D501, D507, D601, D607, D701, D707 |
| 8 | 3k3 | custom_kicad_lib_sk:R_0603_smalltext | R301, R304, R501, R504, R601, R604, R701, R704 |
| 4 | 1N4148WS | Diode_SMD:D_SOD-323 | D302, D502, D602, D702 |
| 4 | 1k | custom_kicad_lib_sk:R_0603_smalltext | R302, R502, R602, R702 |
| 4 | 47R | custom_kicad_lib_sk:R_0603_smalltext | R303, R503, R603, R703 |
| 4 | EL814 | Package_DIP:SMDIP-4_W9.53mm | U301, U501, U601, U701 |
| 4 | G6K-2F-Y-TR DC12 | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K301, K501, K601, K701 |
| 4 | NPN_TOR | Package_TO_SOT_SMD:SOT-23 | Q301, Q501, Q601, Q701 |
| 4 | SW_Push | custom_kicad_lib_sk:tactile_SMD_6mm | SW301, SW501, SW601, SW701 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C201, C203 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C202 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R202 |
| 1 | 6k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201 |
| 1 | ATmega328-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U202 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J402 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J401 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J403 |
| 1 | Crystal_GND2 | custom_kicad_lib_sk:crystal_arduino | Y201 |
| 1 | HEADER_3x2 | Connector_PinSocket_1.27mm:PinSocket_2x03_P1.27mm_Vertical | U201 |
| 1 | LOGO | custom_kicad_lib_sk:Train-Science logo small | G*** |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J101 |
The 74 most common of 78 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers54.5 × 73 mm

OS servo decoder-8
Open-Source-Model-Railway-Electronics/OS-Servo-Decoder
The OS-Servo-Decoder is a simple and robust DCC accessory decoder designed for driving up to 8 servo motors. It supports modern model railroads with flexible configuration options, external relay modules for polarity…
79 parts - 2 layers

- 2 layers

- 2 layers96.8 × 81.5 mm

- 2 layers91.8 × 23.6 mm

- 2 layers85.1 × 85.1 mm

- 2 layers82 × 120 mm

Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.
66 parts467 - 2 layers76.2 × 76.2 mm

PaperBack Converter
dqydj/PaperBack_EPaper_Display
Internet Connected or Standard Input EPaper Display
92 parts83MIT
Questions
How big is the RelayTracker PCB?
It measures 41.5 × 94.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RelayTracker use?
78 parts, built around the ATMEGA328-AU, EL814, SS53 and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RelayTracker KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/relayTracker/relayTracker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RelayTracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.