

Booster bare minimum
- Size
- 49 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 19
- Pads
- 92
- Tracks, vias
- 145, 131
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Mar 2023
- Updated
- 20 May 2026
Overview
Booster bare minimum is an open-source printed circuit board by bask185, from the bask185/Train-Science-DIY repository on GitHub. It is a 2-layer board of 49 × 55 mm with 30 parts on 19 nets, routed with 145 tracks and 131 vias.
It is built around the DRV8874PWP and LM311. Its parts include 8 capacitors, 8 resistors, 5 connectors and 2 ICs.
Main components
2Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C104, C108 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C103, C105 |
| 2 | 22k | custom_kicad_lib_sk:R_0603_smalltext | R101, R106 |
| 2 | 4k7 | custom_kicad_lib_sk:R_0603_smalltext | R107, R108 |
| 1 | 100R | custom_kicad_lib_sk:R_0603_smalltext | R104 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C102 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.9 | C101 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C106 |
| 1 | 1k5 | custom_kicad_lib_sk:R_0603_smalltext | R103 |
| 1 | 22n VM | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C107 |
| 1 | 47k | custom_kicad_lib_sk:R_0603_smalltext | R105 |
| 1 | 680R | custom_kicad_lib_sk:R_0603_smalltext | R102 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J104 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J101 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Horizontal | J102 |
| 1 | DRV8874 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm | U101 |
| 1 | LM311 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U102 |
| 1 | R_Potentiometer | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV101 |
| 1 | Screw_Terminal_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J103 |
| 1 | current sense pad | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J105 |
The 24 most common of 30 parts.
More from bask185/Train-Science-DIY
12- 2 layers75 × 106.5 mm

- 2 layers68.5 × 130.5 mm

- 2 layers153.2 × 127.5 mm

- 2 layers54.5 × 73 mm

- 2 layers99.5 × 61 mm

- 4 layers70 × 83.5 mm

- 2 layers105.5 × 63.5 mm

- 2 layers78 × 58.5 mm

- 2 layers83.5 × 50.3 mm

- 2 layers81 × 71.2 mm

- 2 layers54 × 94.5 mm

- 2 layers100 × 45 mm

Similar boards
- 2 layers115.8 × 160.2 mm

- 4 layers156.8 × 127 mm

Payload PCB v3.1
team-mountaineers-urc-2023/electronics
Block diagrams, schematics, and PCB files related to the electronics subteam
197 parts2BSD-3-Clause - 4 layers130 × 90 mm

LizardBot1 ControlBoard v1
lizard-electronics/LizardBot1_ProjectFiles
Project Files for LizardBot 1 differential-drive ROS2 robot.
202 parts1Apache-2.0 - 4 layers96.1 × 106.5 mm

LCP PowerControl
NOAA-PMEL/EDD-LCP_PistonDriver
Repository for LCP Piston Driver PCB design and firmware
107 parts1MIT - 4 layers65 × 67 mm

DRV8874-Devboard
awesomeyooner/PSD-17DB
This is a breakout board mainly for the DRV8874, but includes other ICs that help with integrating FOC. About the name, it is short for "Polar Stepper Drive 17 - Dev Board".
68 parts - 2 layers70 × 40 mm

- 4 layers114.3 × 86.4 mm

Linear window controller
eflukx/Linear-motor-window-controller
Linear quad/octa motor slide Window controller, featuring absolute position feedback control, motor current monitoring using a ESP32-S3 hi performance controller
201 parts - 2 layers180 × 90 mm

TMC Centrale V2.2
tmc-digiboys/TMC-LZ210-Command-Station-PCB
Printed Circuit Board for the TMC-LZ210
120 parts
Questions
How big is the Booster bare minimum PCB?
It measures 49 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Booster bare minimum use?
30 parts, built around the DRV8874PWP and LM311. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Booster bare minimum KiCad files?
From the bask185/Train-Science-DIY repository on GitHub, at the commit this page was made from: the board is PCB_SOURCE/booster_bare_minimum/booster_bare_minimum.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Booster bare minimum design in my own project?
Its repository states no licence, so its author keeps all rights: ask bask185 before reusing the design.