Skip to the content
2 layers62 × 62 mmValidator SensorBoard, the printed circuit board in 3D

Validator SensorBoard

b4ck5p4c3/donation_box1

Ultimate Donation Box project

Size
62 × 62 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
26
Pads
106
Tracks, vias
492, 4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Feb 2020
Updated
7 Nov 2020

Overview

Validator SensorBoard is an open-source printed circuit board by b4ck5p4c3, from the b4ck5p4c3/donation_box repository on GitHub. It is a 2-layer board of 62 × 62 mm with 29 parts on 26 nets, routed with 492 tracks and 4 vias.

It is built around the L293D, 74HC14 and LTV-247. Its parts include 11 resistors, 6 capacitors, 4 connectors, 3 ICs and 3 transistors.

Main components

3

README

README.md

Умная Коробка Для Сбора Пожертвований, Оплаты Членских Взносов И Других Одним Разработчикам Ведомых Применений

Полезная функциональность коробки:

  • прием безвозмездных пожертвований наличными
  • прием членских взносов наличными
  • регистрация и отзыв пропусков в СКУД

Фановая функциональность коробки, предоставляется в ответ на любой безвозмезддный или членский взнос

  • фото на gameboy camera с последующей отправкой на почту, в телегу или печатью на чековой ленте
  • печать "пожеланий" на чековой ленте

Parts

29
QtyValueFootprintReferences
11RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3, R4, R7, R8, R9, R10, R11, R16, R17
30.47uCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2, C3
3BPW40LED_THT:LED_D5.0mm_ClearQ1, Q2, Q3
3Conn_01x02ValidatorController:CWF-2J1, J3, J4
20.1uCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC4, C5
2LEDLED_THT:LED_D5.0mm_Horizontal_O6.35mm_Z3.0mmD1, D2
122uCapacitor_SMD:CP_Elec_6.3x5.4C6
174HC14Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1
1Conn_01x10Connector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ2
1L293DPackage_DIP:DIP-16_W7.62mm_LongPadsU4
1LTV-247Package_SO:SOP-16_4.4x10.4mm_P1.27mmU2

More from b4ck5p4c3/donation_box

1
  • 2 layers60 × 65 mmValidator IRLedBoard, the printed circuit board in 3D

    Validator IRLedBoard

    b4ck5p4c3/donation_box

    Ultimate Donation Box project

    8 parts1

Similar boards

  • 2 layers101.6 × 107.9 mmSistdig, the printed circuit board in 3D

    Sistdig

    dinge321/motor_pcb

    This is a pcb for a 6V motor project using an unspecified microcontroler with the driver L293D

    21 parts
  • 2 layers134.6 × 49.5 mmMem esp, the printed circuit board in 3D

    Mem esp

    fread/visvitalis

    A very simple modular relay computer

    71 parts7
  • 4 layers62 × 75 mmCANBoard Base, the printed circuit board in 3D

    CANBoard Base

    ADVecu/CANBoard-Carrier

    An automotive-grade carrier board for the CANBoard-HW. This board adapts the system for reliable use in vehicles and motorcycles.

    100 parts4
  • 6 layers100 × 37 mmPickleRick, the printed circuit board in 3D

    PickleRick

    icl-rocketry/Ricardo-PickleRick

    A more compact Ricardo classic featuring a new sensor array, 4 pyro channels and 4 servo channels. Includes Ricardo bus plug too.

    223 parts2MIT
  • 2 layers138 × 162 mmRemora Nucleo F446ZE Hat, the printed circuit board in 3D

    Remora Nucleo F446ZE Hat

    ben-jacobson/RemoraNucleoHatPCB

    Cost-effective, customisable LinuxCNC motion control unit.

    179 parts1GPL-3.0
  • 2 layers100 × 100 mmESP32, the printed circuit board in 3D

    ESP32

    Diegoapp55/Proyecto-Sistemas-Embebidos-Smash-Rows

    Repositorio para el proyecto de Sistemas Embebidos 2022-2: Smash Rows

    71 parts1
  • 4 layers44 × 58 mmFlintandsteel, the printed circuit board in 3D

    Flintandsteel

    icl-rocketry/Ricardo-FlintandSteel

    E-match control board

    143 parts1MIT

Questions

How big is the Validator SensorBoard PCB?

It measures 62 × 62 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Validator SensorBoard use?

29 parts, built around the L293D, 74HC14 and LTV-247. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Validator SensorBoard KiCad files?

From the b4ck5p4c3/donation_box repository on GitHub, at the commit this page was made from: the board is hardware/Validator_SensorBoard/Validator_SensorBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Validator SensorBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask b4ck5p4c3 before reusing the design.