

Repositorio para el proyecto de Sistemas Embebidos 2022-2: Smash Rows
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 89
- Pads
- 262
- Tracks, vias
- 383, 38
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Aug 2022
- Updated
- 12 Dec 2022
Overview
ESP32 is an open-source printed circuit board by Diegoapp55, from the Diegoapp55/Proyecto-Sistemas-Embebidos-Smash-Rows repository on GitHub. It is a 2-layer board of 100 × 100 mm with 71 parts on 89 nets, routed with 383 tracks and 38 vias.
It is built around the ESP32-WROOM-32, LTV-247 and ULN2003A, with the AMS1117-3.3, AMS1117-5.0 and S8550 among its other parts. Its parts include 29 resistors, 11 capacitors, 8 ICs, 8 transistors and 4 connectors. It belongs with the ESP32 boards of this library.
Main components
6ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLTV-247
SOP-16-5.4mm-55℃~+110℃ 1.2V 100% 170mW 3.75kV 3us 4 400mV@2.4mA,8mA 50mA 50mA 600% 6V 80V DC Phototransistor SOP-16-5.4mm Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsS8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdProyecto-Sistemas-Embebidos
Repositorio para el proyecto de Sistemas Embebidos 2022-2: Smash Rows
En la wiki de este repositorio se encuentra la documentación al respecto del proyecto.
Integrantes:
- Raúl Andrés Guzmán Mayorga
- Sergio Andrés Guevara Contreras
- Diego Alejandro Sánchez Mendoza
- Eduardo Toro Bernal
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R9, R10, R11, R12, R13, R14, R15, R16, R21, R22, R23, R24 |
| 8 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R17, R18, R19, R20 |
| 8 | S8550 | Package_TO_SOT_SMD:TSOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C177 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C13, C15, C178 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R27 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C14 |
| 2 | 68 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R28, R29 |
| 2 | LTV-247 | Package_DIP:DIP-16_W7.62mm_Socket | U1, U2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | BOOT1, EN1 |
| 2 | ULN2003A | Package_DIP:DIP-16_W7.62mm_Socket | U3, U4 |
| 1 | 1N4007 | Diode_SMD:D_SMA_Handsoldering | D3 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | Conector para bobinas del motor 1 | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | Conector para bobinas del motor 2 | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U7 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LOGO | LibraryLogo:LogoSR | G*** |
| 1 | Led_ON | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Led_holamundo | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | RFID_RC522 | Connector_JST:JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical | U8 |
| 1 | USB Programador | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
Similar boards
- 2 layers150 × 100 mm

- 4 layers155.6 × 120 mm

OSCAR
tne-lab/OSCAR
An open-source controller for animal research Report Bug · Request Feature
139 parts1MIT - 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 4 layers94 × 120 mm

- 4 layers70 × 157.5 mm

Controller Tv Lift
vyrubaev/TV-Lift-Controller
TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.
103 parts - 2 layers77.2 × 44.5 mm

Esp32 rtc display
beer88/PCB-Projects-Kicad
This repository contains a collection of PCB design projects developed using KiCad, covering a range of applications in embedded systems, automation, and hardware development.
55 parts1 - 2 layers260 × 440 mm

Multical
Samuelmathe/TFC-Multicanal-Goma
TFC ULPGL Goma - Systeme IoT multicanal de sous-comptage energetique (ESP32, KiCad, Flutter)
67 parts - 2 layers95 × 55 mm

Smarthome v0.1
whysixmift/smarthome_v0.1
I wanted to control lights and appliances in my room over Wi-Fi without having loose relay modules, breadboards, and 220V AC wires floating around my desk.
63 parts
Questions
How big is the ESP32 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 use?
71 parts, built around the ESP32-WROOM-32, LTV-247, ULN2003A and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 KiCad files?
From the Diegoapp55/Proyecto-Sistemas-Embebidos-Smash-Rows repository on GitHub, at the commit this page was made from: the board is Esquematicos/ESP32/ESP32.kicad_pcb and its schematic Esquematicos/ESP32/ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Diegoapp55 before reusing the design.